[U-Boot] [PATCH v7 1/5] Add support for SMSC95XX USB 2.0 10/100MBit Ethernet Adapter
Simon Glass
sjg at chromium.org
Wed Jun 1 20:43:30 CEST 2011
The SMSC95XX is a USB hub with a built-in Ethernet adapter. This adds support
for this, using the USB host network framework.
Changes for v2:
- Coding style cleanup
- Changed some comments as suggested
Changes for v3:
- Change turbo_mode to #define
Changes for v4:
- Dropped Tegra2 specific bit
- Fixed a few broken bits in SMSC from my testing
Changes for v5:
- Code style clean-ups in SMSC
- Cleaned up debugging of errors in SMSC driver
Changes for v6:
- Set NET_IP_ALIGN to 0 always
Signed-off-by: Simon Glass <sjg at chromium.org>
---
drivers/usb/eth/Makefile | 1 +
drivers/usb/eth/smsc95xx.c | 878 +++++++++++++++++++++++++++++++++++++++++++
drivers/usb/eth/usb_ether.c | 7 +
include/usb_ether.h | 13 +
4 files changed, 899 insertions(+), 0 deletions(-)
create mode 100644 drivers/usb/eth/smsc95xx.c
diff --git a/drivers/usb/eth/Makefile b/drivers/usb/eth/Makefile
index 6a5f25a..e28793d 100644
--- a/drivers/usb/eth/Makefile
+++ b/drivers/usb/eth/Makefile
@@ -28,6 +28,7 @@ COBJS-$(CONFIG_USB_HOST_ETHER) += usb_ether.o
ifdef CONFIG_USB_ETHER_ASIX
COBJS-y += asix.o
endif
+COBJS-$(CONFIG_USB_ETHER_SMSC95XX) += smsc95xx.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/usb/eth/smsc95xx.c b/drivers/usb/eth/smsc95xx.c
new file mode 100644
index 0000000..4d8dde0
--- /dev/null
+++ b/drivers/usb/eth/smsc95xx.c
@@ -0,0 +1,878 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * Copyright (C) 2009 NVIDIA, Corporation
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <usb.h>
+#include <linux/mii.h>
+#include "usb_ether.h"
+
+/* SMSC LAN95xx based USB 2.0 Ethernet Devices */
+
+/* Tx command words */
+#define TX_CMD_A_FIRST_SEG_ 0x00002000
+#define TX_CMD_A_LAST_SEG_ 0x00001000
+
+/* Rx status word */
+#define RX_STS_FL_ 0x3FFF0000 /* Frame Length */
+#define RX_STS_ES_ 0x00008000 /* Error Summary */
+
+/* SCSRs */
+#define ID_REV 0x00
+
+#define INT_STS 0x08
+
+#define TX_CFG 0x10
+#define TX_CFG_ON_ 0x00000004
+
+#define HW_CFG 0x14
+#define HW_CFG_BIR_ 0x00001000
+#define HW_CFG_RXDOFF_ 0x00000600
+#define HW_CFG_MEF_ 0x00000020
+#define HW_CFG_BCE_ 0x00000002
+#define HW_CFG_LRST_ 0x00000008
+
+#define PM_CTRL 0x20
+#define PM_CTL_PHY_RST_ 0x00000010
+
+#define AFC_CFG 0x2C
+
+/*
+ * Hi watermark = 15.5Kb (~10 mtu pkts)
+ * low watermark = 3k (~2 mtu pkts)
+ * backpressure duration = ~ 350us
+ * Apply FC on any frame.
+ */
+#define AFC_CFG_DEFAULT 0x00F830A1
+
+#define E2P_CMD 0x30
+#define E2P_CMD_BUSY_ 0x80000000
+#define E2P_CMD_READ_ 0x00000000
+#define E2P_CMD_TIMEOUT_ 0x00000400
+#define E2P_CMD_LOADED_ 0x00000200
+#define E2P_CMD_ADDR_ 0x000001FF
+
+#define E2P_DATA 0x34
+
+#define BURST_CAP 0x38
+
+#define INT_EP_CTL 0x68
+#define INT_EP_CTL_PHY_INT_ 0x00008000
+
+#define BULK_IN_DLY 0x6C
+
+/* MAC CSRs */
+#define MAC_CR 0x100
+#define MAC_CR_MCPAS_ 0x00080000
+#define MAC_CR_PRMS_ 0x00040000
+#define MAC_CR_HPFILT_ 0x00002000
+#define MAC_CR_TXEN_ 0x00000008
+#define MAC_CR_RXEN_ 0x00000004
+
+#define ADDRH 0x104
+
+#define ADDRL 0x108
+
+#define MII_ADDR 0x114
+#define MII_WRITE_ 0x02
+#define MII_BUSY_ 0x01
+#define MII_READ_ 0x00 /* ~of MII Write bit */
+
+#define MII_DATA 0x118
+
+#define FLOW 0x11C
+
+#define VLAN1 0x120
+
+#define COE_CR 0x130
+#define Tx_COE_EN_ 0x00010000
+#define Rx_COE_EN_ 0x00000001
+
+/* Vendor-specific PHY Definitions */
+#define PHY_INT_SRC 29
+
+#define PHY_INT_MASK 30
+#define PHY_INT_MASK_ANEG_COMP_ ((u16)0x0040)
+#define PHY_INT_MASK_LINK_DOWN_ ((u16)0x0010)
+#define PHY_INT_MASK_DEFAULT_ (PHY_INT_MASK_ANEG_COMP_ | \
+ PHY_INT_MASK_LINK_DOWN_)
+
+/* USB Vendor Requests */
+#define USB_VENDOR_REQUEST_WRITE_REGISTER 0xA0
+#define USB_VENDOR_REQUEST_READ_REGISTER 0xA1
+
+/* Some extra defines */
+#define HS_USB_PKT_SIZE 512
+#define FS_USB_PKT_SIZE 64
+#define DEFAULT_HS_BURST_CAP_SIZE (16 * 1024 + 5 * HS_USB_PKT_SIZE)
+#define DEFAULT_FS_BURST_CAP_SIZE (6 * 1024 + 33 * FS_USB_PKT_SIZE)
+#define DEFAULT_BULK_IN_DELAY 0x00002000
+#define MAX_SINGLE_PACKET_SIZE 2048
+#define EEPROM_MAC_OFFSET 0x01
+#define SMSC95XX_INTERNAL_PHY_ID 1
+#define ETH_P_8021Q 0x8100 /* 802.1Q VLAN Extended Header */
+
+/* local defines */
+#define SMSC95XX_BASE_NAME "sms"
+#define USB_CTRL_SET_TIMEOUT 5000
+#define USB_CTRL_GET_TIMEOUT 5000
+#define USB_BULK_SEND_TIMEOUT 5000
+#define USB_BULK_RECV_TIMEOUT 5000
+
+#define AX_RX_URB_SIZE 2048
+#define PHY_CONNECT_TIMEOUT 5000
+
+#define TURBO_MODE
+
+/* local vars */
+static int curr_eth_dev; /* index for name of next device detected */
+
+
+/*
+ * Smsc95xx infrastructure commands
+ */
+static int smsc95xx_write_reg(struct ueth_data *dev, u32 index, u32 data)
+{
+ int len;
+
+ cpu_to_le32s(&data);
+
+ len = usb_control_msg(dev->pusb_dev, usb_sndctrlpipe(dev->pusb_dev, 0),
+ USB_VENDOR_REQUEST_WRITE_REGISTER,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 00, index, &data, sizeof(data), USB_CTRL_SET_TIMEOUT);
+ if (len != sizeof(data)) {
+ debug("smsc95xx_write_reg failed: index=%d, data=%d, len=%d",
+ index, data, len);
+ return -1;
+ }
+ return 0;
+}
+
+static int smsc95xx_read_reg(struct ueth_data *dev, u32 index, u32 *data)
+{
+ int len;
+
+ len = usb_control_msg(dev->pusb_dev, usb_rcvctrlpipe(dev->pusb_dev, 0),
+ USB_VENDOR_REQUEST_READ_REGISTER,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 00, index, data, sizeof(data), USB_CTRL_GET_TIMEOUT);
+ if (len != sizeof(data)) {
+ debug("smsc95xx_read_reg failed: index=%d, len=%d",
+ index, len);
+ return -1;
+ }
+
+ le32_to_cpus(data);
+ return 0;
+}
+
+/* Loop until the read is completed with timeout */
+static int smsc95xx_phy_wait_not_busy(struct ueth_data *dev)
+{
+ unsigned long start_time = get_timer(0);
+ u32 val;
+
+ do {
+ smsc95xx_read_reg(dev, MII_ADDR, &val);
+ if (!(val & MII_BUSY_))
+ return 0;
+ } while (get_timer(start_time) < 1 * 1000 * 1000);
+
+ return -1;
+}
+
+static int smsc95xx_mdio_read(struct ueth_data *dev, int phy_id, int idx)
+{
+ u32 val, addr;
+
+ /* confirm MII not busy */
+ if (smsc95xx_phy_wait_not_busy(dev)) {
+ debug("MII is busy in smsc95xx_mdio_read\n");
+ return -1;
+ }
+
+ /* set the address, index & direction (read from PHY) */
+ addr = (phy_id << 11) | (idx << 6) | MII_READ_;
+ smsc95xx_write_reg(dev, MII_ADDR, addr);
+
+ if (smsc95xx_phy_wait_not_busy(dev)) {
+ debug("Timed out reading MII reg %02X\n", idx);
+ return -1;
+ }
+
+ smsc95xx_read_reg(dev, MII_DATA, &val);
+
+ return (u16)(val & 0xFFFF);
+}
+
+static void smsc95xx_mdio_write(struct ueth_data *dev, int phy_id, int idx,
+ int regval)
+{
+ u32 val, addr;
+
+ /* confirm MII not busy */
+ if (smsc95xx_phy_wait_not_busy(dev)) {
+ debug("MII is busy in smsc95xx_mdio_write\n");
+ return;
+ }
+
+ val = regval;
+ smsc95xx_write_reg(dev, MII_DATA, val);
+
+ /* set the address, index & direction (write to PHY) */
+ addr = (phy_id << 11) | (idx << 6) | MII_WRITE_;
+ smsc95xx_write_reg(dev, MII_ADDR, addr);
+
+ if (smsc95xx_phy_wait_not_busy(dev))
+ debug("Timed out writing MII reg %02X\n", idx);
+}
+
+static int smsc95xx_eeprom_confirm_not_busy(struct ueth_data *dev)
+{
+ unsigned long start_time = get_timer(0);
+ u32 val;
+
+ do {
+ smsc95xx_read_reg(dev, E2P_CMD, &val);
+ if (!(val & E2P_CMD_LOADED_)) {
+ debug("No EEPROM present\n");
+ return -1;
+ }
+ if (!(val & E2P_CMD_BUSY_))
+ return 0;
+ udelay(40);
+ } while (get_timer(start_time) < 1 * 1000 * 1000);
+
+ debug("EEPROM is busy\n");
+ return -1;
+}
+
+static int smsc95xx_wait_eeprom(struct ueth_data *dev)
+{
+ unsigned long start_time = get_timer(0);
+ u32 val;
+
+ do {
+ smsc95xx_read_reg(dev, E2P_CMD, &val);
+ if (!(val & E2P_CMD_BUSY_) || (val & E2P_CMD_TIMEOUT_))
+ break;
+ udelay(40);
+ } while (get_timer(start_time) < 1 * 1000 * 1000);
+
+ if (val & (E2P_CMD_TIMEOUT_ | E2P_CMD_BUSY_)) {
+ debug("EEPROM read operation timeout\n");
+ return -1;
+ }
+ return 0;
+}
+
+static int smsc95xx_read_eeprom(struct ueth_data *dev, u32 offset, u32 length,
+ u8 *data)
+{
+ u32 val;
+ int i, ret;
+
+ ret = smsc95xx_eeprom_confirm_not_busy(dev);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < length; i++) {
+ val = E2P_CMD_BUSY_ | E2P_CMD_READ_ | (offset & E2P_CMD_ADDR_);
+ smsc95xx_write_reg(dev, E2P_CMD, val);
+
+ ret = smsc95xx_wait_eeprom(dev);
+ if (ret < 0)
+ return ret;
+
+ smsc95xx_read_reg(dev, E2P_DATA, &val);
+ data[i] = val & 0xFF;
+ offset++;
+ }
+ return 0;
+}
+
+/*
+ * mii_nway_restart - restart NWay (autonegotiation) for this interface
+ *
+ * Returns 0 on success, negative on error.
+ */
+static int mii_nway_restart(struct ueth_data *dev)
+{
+ int bmcr;
+ int r = -1;
+
+ /* if autoneg is off, it's an error */
+ bmcr = smsc95xx_mdio_read(dev, dev->phy_id, MII_BMCR);
+
+ if (bmcr & BMCR_ANENABLE) {
+ bmcr |= BMCR_ANRESTART;
+ smsc95xx_mdio_write(dev, dev->phy_id, MII_BMCR, bmcr);
+ r = 0;
+ }
+ return r;
+}
+
+static int smsc95xx_phy_initialize(struct ueth_data *dev)
+{
+ smsc95xx_mdio_write(dev, dev->phy_id, MII_BMCR, BMCR_RESET);
+ smsc95xx_mdio_write(dev, dev->phy_id, MII_ADVERTISE,
+ ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP |
+ ADVERTISE_PAUSE_ASYM);
+
+ /* read to clear */
+ smsc95xx_mdio_read(dev, dev->phy_id, PHY_INT_SRC);
+
+ smsc95xx_mdio_write(dev, dev->phy_id, PHY_INT_MASK,
+ PHY_INT_MASK_DEFAULT_);
+ mii_nway_restart(dev);
+
+ debug("phy initialised succesfully\n");
+ return 0;
+}
+
+static int smsc95xx_init_mac_address(struct eth_device *eth,
+ struct ueth_data *dev)
+{
+ /* try reading mac address from EEPROM */
+ if (smsc95xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
+ eth->enetaddr) == 0) {
+ if (is_valid_ether_addr(eth->enetaddr)) {
+ /* eeprom values are valid so use them */
+ debug("MAC address read from EEPROM\n");
+ return 0;
+ }
+ }
+
+ /*
+ * No eeprom, or eeprom values are invalid. Generating a random MAC
+ * address is not safe. Just return an error.
+ */
+ return -1;
+}
+
+static int smsc95xx_write_hwaddr(struct eth_device *eth)
+{
+ struct ueth_data *dev = (struct ueth_data *)eth->priv;
+ u32 addr_lo, addr_hi;
+ int ret;
+
+ /* set hardware address */
+ debug("** %s()\n", __func__);
+ addr_lo = cpu_to_le32(*((u32 *)eth->enetaddr));
+ addr_hi = cpu_to_le16(*((u16 *)(eth->enetaddr + 4)));
+ ret = smsc95xx_write_reg(dev, ADDRL, addr_lo);
+ if (ret < 0) {
+ debug("Failed to write ADDRL: %d\n", ret);
+ return ret;
+ }
+
+ ret = smsc95xx_write_reg(dev, ADDRH, addr_hi);
+ if (ret < 0)
+ return ret;
+ debug("MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
+ eth->enetaddr[0], eth->enetaddr[1],
+ eth->enetaddr[2], eth->enetaddr[3],
+ eth->enetaddr[4], eth->enetaddr[5]);
+ dev->have_hwaddr = 1;
+ return 0;
+}
+
+/* Enable or disable Tx & Rx checksum offload engines */
+static int smsc95xx_set_csums(struct ueth_data *dev,
+ int use_tx_csum, int use_rx_csum)
+{
+ u32 read_buf;
+ int ret = smsc95xx_read_reg(dev, COE_CR, &read_buf);
+ if (ret < 0)
+ return ret;
+
+ if (use_tx_csum)
+ read_buf |= Tx_COE_EN_;
+ else
+ read_buf &= ~Tx_COE_EN_;
+
+ if (use_rx_csum)
+ read_buf |= Rx_COE_EN_;
+ else
+ read_buf &= ~Rx_COE_EN_;
+
+ ret = smsc95xx_write_reg(dev, COE_CR, read_buf);
+ if (ret < 0)
+ return ret;
+
+ debug("COE_CR = 0x%08x\n", read_buf);
+ return 0;
+}
+
+static void smsc95xx_set_multicast(struct ueth_data *dev)
+{
+ /* No multicast in u-boot */
+ dev->mac_cr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_ | MAC_CR_HPFILT_);
+}
+
+/* starts the TX path */
+static void smsc95xx_start_tx_path(struct ueth_data *dev)
+{
+ u32 reg_val;
+
+ /* Enable Tx at MAC */
+ dev->mac_cr |= MAC_CR_TXEN_;
+
+ smsc95xx_write_reg(dev, MAC_CR, dev->mac_cr);
+
+ /* Enable Tx at SCSRs */
+ reg_val = TX_CFG_ON_;
+ smsc95xx_write_reg(dev, TX_CFG, reg_val);
+}
+
+/* Starts the Receive path */
+static void smsc95xx_start_rx_path(struct ueth_data *dev)
+{
+ dev->mac_cr |= MAC_CR_RXEN_;
+ smsc95xx_write_reg(dev, MAC_CR, dev->mac_cr);
+}
+
+/*
+ * Smsc95xx callbacks
+ */
+static int smsc95xx_init(struct eth_device *eth, bd_t *bd)
+{
+ int ret;
+ u32 write_buf;
+ u32 read_buf;
+ u32 burst_cap;
+ int timeout;
+ struct ueth_data *dev = (struct ueth_data *)eth->priv;
+#define TIMEOUT_RESOLUTION 50 /* ms */
+ int link_detected;
+
+ debug("** %s()\n", __func__);
+ dev->phy_id = SMSC95XX_INTERNAL_PHY_ID; /* fixed phy id */
+
+ write_buf = HW_CFG_LRST_;
+ ret = smsc95xx_write_reg(dev, HW_CFG, write_buf);
+ if (ret < 0)
+ return ret;
+
+ timeout = 0;
+ do {
+ ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
+ if (ret < 0)
+ return ret;
+ udelay(10 * 1000);
+ timeout++;
+ } while ((read_buf & HW_CFG_LRST_) && (timeout < 100));
+
+ if (timeout >= 100) {
+ debug("timeout waiting for completion of Lite Reset\n");
+ return -1;
+ }
+
+ write_buf = PM_CTL_PHY_RST_;
+ ret = smsc95xx_write_reg(dev, PM_CTRL, write_buf);
+ if (ret < 0)
+ return ret;
+
+ timeout = 0;
+ do {
+ ret = smsc95xx_read_reg(dev, PM_CTRL, &read_buf);
+ if (ret < 0)
+ return ret;
+ udelay(10 * 1000);
+ timeout++;
+ } while ((read_buf & PM_CTL_PHY_RST_) && (timeout < 100));
+ if (timeout >= 100) {
+ debug("timeout waiting for PHY Reset\n");
+ return -1;
+ }
+ if (!dev->have_hwaddr && smsc95xx_init_mac_address(eth, dev) == 0)
+ dev->have_hwaddr = 1;
+ if (!dev->have_hwaddr) {
+ puts("Error: SMSC95xx: No MAC address set - set usbethaddr\n");
+ return -1;
+ }
+ if (smsc95xx_write_hwaddr(eth) < 0)
+ return -1;
+
+ ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
+ if (ret < 0)
+ return ret;
+ debug("Read Value from HW_CFG : 0x%08x\n", read_buf);
+
+ read_buf |= HW_CFG_BIR_;
+ ret = smsc95xx_write_reg(dev, HW_CFG, read_buf);
+ if (ret < 0)
+ return ret;
+
+ ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
+ if (ret < 0)
+ return ret;
+ debug("Read Value from HW_CFG after writing "
+ "HW_CFG_BIR_: 0x%08x\n", read_buf);
+
+#ifdef TURBO_MODE
+ if (dev->pusb_dev->speed == USB_SPEED_HIGH) {
+ burst_cap = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE;
+ dev->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE;
+ } else {
+ burst_cap = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE;
+ dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE;
+ }
+#else
+ burst_cap = 0;
+ dev->rx_urb_size = MAX_SINGLE_PACKET_SIZE;
+#endif
+ debug("rx_urb_size=%ld\n", (ulong)dev->rx_urb_size);
+
+ ret = smsc95xx_write_reg(dev, BURST_CAP, burst_cap);
+ if (ret < 0)
+ return ret;
+
+ ret = smsc95xx_read_reg(dev, BURST_CAP, &read_buf);
+ if (ret < 0)
+ return ret;
+ debug("Read Value from BURST_CAP after writing: 0x%08x\n", read_buf);
+
+ read_buf = DEFAULT_BULK_IN_DELAY;
+ ret = smsc95xx_write_reg(dev, BULK_IN_DLY, read_buf);
+ if (ret < 0)
+ return ret;
+
+ ret = smsc95xx_read_reg(dev, BULK_IN_DLY, &read_buf);
+ if (ret < 0)
+ return ret;
+ debug("Read Value from BULK_IN_DLY after writing: "
+ "0x%08x\n", read_buf);
+
+ ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
+ if (ret < 0)
+ return ret;
+ debug("Read Value from HW_CFG: 0x%08x\n", read_buf);
+
+#ifdef TURBO_MODE
+ read_buf |= (HW_CFG_MEF_ | HW_CFG_BCE_);
+#endif
+ read_buf &= ~HW_CFG_RXDOFF_;
+
+#define NET_IP_ALIGN 0
+ read_buf |= NET_IP_ALIGN << 9;
+
+ ret = smsc95xx_write_reg(dev, HW_CFG, read_buf);
+ if (ret < 0)
+ return ret;
+
+ ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
+ if (ret < 0)
+ return ret;
+ debug("Read Value from HW_CFG after writing: 0x%08x\n", read_buf);
+
+ write_buf = 0xFFFFFFFF;
+ ret = smsc95xx_write_reg(dev, INT_STS, write_buf);
+ if (ret < 0)
+ return ret;
+
+ ret = smsc95xx_read_reg(dev, ID_REV, &read_buf);
+ if (ret < 0)
+ return ret;
+ debug("ID_REV = 0x%08x\n", read_buf);
+
+ /* Init Tx */
+ write_buf = 0;
+ ret = smsc95xx_write_reg(dev, FLOW, write_buf);
+ if (ret < 0)
+ return ret;
+
+ read_buf = AFC_CFG_DEFAULT;
+ ret = smsc95xx_write_reg(dev, AFC_CFG, read_buf);
+ if (ret < 0)
+ return ret;
+
+ ret = smsc95xx_read_reg(dev, MAC_CR, &dev->mac_cr);
+ if (ret < 0)
+ return ret;
+
+ /* Init Rx. Set Vlan */
+ write_buf = (u32)ETH_P_8021Q;
+ ret = smsc95xx_write_reg(dev, VLAN1, write_buf);
+ if (ret < 0)
+ return ret;
+
+ /* Disable checksum offload engines */
+ ret = smsc95xx_set_csums(dev, 0, 0);
+ if (ret < 0) {
+ debug("Failed to set csum offload: %d\n", ret);
+ return ret;
+ }
+ smsc95xx_set_multicast(dev);
+
+ if (smsc95xx_phy_initialize(dev) < 0)
+ return -1;
+ ret = smsc95xx_read_reg(dev, INT_EP_CTL, &read_buf);
+ if (ret < 0)
+ return ret;
+
+ /* enable PHY interrupts */
+ read_buf |= INT_EP_CTL_PHY_INT_;
+
+ ret = smsc95xx_write_reg(dev, INT_EP_CTL, read_buf);
+ if (ret < 0)
+ return ret;
+
+ smsc95xx_start_tx_path(dev);
+ smsc95xx_start_rx_path(dev);
+
+ timeout = 0;
+ do {
+ link_detected = smsc95xx_mdio_read(dev, dev->phy_id, MII_BMSR)
+ & BMSR_LSTATUS;
+ if (!link_detected) {
+ if (timeout == 0)
+ printf("Waiting for Ethernet connection... ");
+ udelay(TIMEOUT_RESOLUTION * 1000);
+ timeout += TIMEOUT_RESOLUTION;
+ }
+ } while (!link_detected && timeout < PHY_CONNECT_TIMEOUT);
+ if (link_detected) {
+ if (timeout != 0)
+ printf("done.\n");
+ } else {
+ printf("unable to connect.\n");
+ return -1;
+ }
+ return 0;
+}
+
+static int smsc95xx_send(struct eth_device *eth, volatile void* packet,
+ int length)
+{
+ struct ueth_data *dev = (struct ueth_data *)eth->priv;
+ int err;
+ int actual_len;
+ u32 tx_cmd_a;
+ u32 tx_cmd_b;
+ unsigned char msg[PKTSIZE + sizeof(tx_cmd_a) + sizeof(tx_cmd_b)];
+
+ debug("** %s(), len %d, buf %#x\n", __func__, length, (int)msg);
+ if (length > PKTSIZE)
+ return -1;
+
+ tx_cmd_a = (u32)length | TX_CMD_A_FIRST_SEG_ | TX_CMD_A_LAST_SEG_;
+ tx_cmd_b = (u32)length;
+ cpu_to_le32s(&tx_cmd_a);
+ cpu_to_le32s(&tx_cmd_b);
+
+ /* prepend cmd_a and cmd_b */
+ memcpy(msg, &tx_cmd_a, sizeof(tx_cmd_a));
+ memcpy(msg + sizeof(tx_cmd_a), &tx_cmd_b, sizeof(tx_cmd_b));
+ memcpy(msg + sizeof(tx_cmd_a) + sizeof(tx_cmd_b), (void *)packet,
+ length);
+ err = usb_bulk_msg(dev->pusb_dev,
+ usb_sndbulkpipe(dev->pusb_dev, dev->ep_out),
+ (void *)msg,
+ length + sizeof(tx_cmd_a) + sizeof(tx_cmd_b),
+ &actual_len,
+ USB_BULK_SEND_TIMEOUT);
+ debug("Tx: len = %u, actual = %u, err = %d\n",
+ length + sizeof(tx_cmd_a) + sizeof(tx_cmd_b),
+ actual_len, err);
+ return err;
+}
+
+static int smsc95xx_recv(struct eth_device *eth)
+{
+ struct ueth_data *dev = (struct ueth_data *)eth->priv;
+ static unsigned char recv_buf[AX_RX_URB_SIZE];
+ unsigned char *buf_ptr;
+ int err;
+ int actual_len;
+ u32 packet_len;
+ int cur_buf_align;
+
+ debug("** %s()\n", __func__);
+ err = usb_bulk_msg(dev->pusb_dev,
+ usb_rcvbulkpipe(dev->pusb_dev, dev->ep_in),
+ (void *)recv_buf,
+ AX_RX_URB_SIZE,
+ &actual_len,
+ USB_BULK_RECV_TIMEOUT);
+ debug("Rx: len = %u, actual = %u, err = %d\n", AX_RX_URB_SIZE,
+ actual_len, err);
+ if (err != 0) {
+ debug("Rx: failed to receive\n");
+ return -1;
+ }
+ if (actual_len > AX_RX_URB_SIZE) {
+ debug("Rx: received too many bytes %d\n", actual_len);
+ return -1;
+ }
+
+ buf_ptr = recv_buf;
+ while (actual_len > 0) {
+ /*
+ * 1st 4 bytes contain the length of the actual data plus error
+ * info. Extract data length.
+ */
+ if (actual_len < sizeof(packet_len)) {
+ debug("Rx: incomplete packet length\n");
+ return -1;
+ }
+ memcpy(&packet_len, buf_ptr, sizeof(packet_len));
+ le32_to_cpus(&packet_len);
+ if (packet_len & RX_STS_ES_) {
+ debug("Rx: Error header=%#x", packet_len);
+ return -1;
+ }
+ packet_len = ((packet_len & RX_STS_FL_) >> 16);
+
+ if (packet_len > actual_len - sizeof(packet_len)) {
+ debug("Rx: too large packet: %d\n", packet_len);
+ return -1;
+ }
+
+ /* Notify net stack */
+ NetReceive(buf_ptr + sizeof(packet_len), packet_len - 4);
+
+ /* Adjust for next iteration */
+ actual_len -= sizeof(packet_len) + packet_len;
+ buf_ptr += sizeof(packet_len) + packet_len;
+ cur_buf_align = (int)buf_ptr - (int)recv_buf;
+
+ if (cur_buf_align & 0x03) {
+ int align = 4 - (cur_buf_align & 0x03);
+
+ actual_len -= align;
+ buf_ptr += align;
+ }
+ }
+ return err;
+}
+
+static void smsc95xx_halt(struct eth_device *eth)
+{
+ debug("** %s()\n", __func__);
+}
+
+/*
+ * SMSC probing functions
+ */
+void smsc95xx_eth_before_probe(void)
+{
+ curr_eth_dev = 0;
+}
+
+struct smsc95xx_dongle {
+ unsigned short vendor;
+ unsigned short product;
+};
+
+static const struct smsc95xx_dongle smsc95xx_dongles[] = {
+ { 0x0424, 0xec00 }, /* LAN9512/LAN9514 Ethernet */
+ { 0x0424, 0x9500 }, /* LAN9500 Ethernet */
+ { 0x0000, 0x0000 } /* END - Do not remove */
+};
+
+/* Probe to see if a new device is actually an SMSC device */
+int smsc95xx_eth_probe(struct usb_device *dev, unsigned int ifnum,
+ struct ueth_data *ss)
+{
+ struct usb_interface *iface;
+ struct usb_interface_descriptor *iface_desc;
+ int i;
+
+ /* let's examine the device now */
+ iface = &dev->config.if_desc[ifnum];
+ iface_desc = &dev->config.if_desc[ifnum].desc;
+
+ for (i = 0; smsc95xx_dongles[i].vendor != 0; i++) {
+ if (dev->descriptor.idVendor == smsc95xx_dongles[i].vendor &&
+ dev->descriptor.idProduct == smsc95xx_dongles[i].product)
+ /* Found a supported dongle */
+ break;
+ }
+ if (smsc95xx_dongles[i].vendor == 0)
+ return 0;
+
+ /* At this point, we know we've got a live one */
+ debug("\n\nUSB Ethernet device detected\n");
+ memset(ss, '\0', sizeof(struct ueth_data));
+
+ /* Initialize the ueth_data structure with some useful info */
+ ss->ifnum = ifnum;
+ ss->pusb_dev = dev;
+ ss->subclass = iface_desc->bInterfaceSubClass;
+ ss->protocol = iface_desc->bInterfaceProtocol;
+
+ /*
+ * We are expecting a minimum of 3 endpoints - in, out (bulk), and int.
+ * We will ignore any others.
+ */
+ for (i = 0; i < iface_desc->bNumEndpoints; i++) {
+ /* is it an BULK endpoint? */
+ if ((iface->ep_desc[i].bmAttributes &
+ USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) {
+ if (iface->ep_desc[i].bEndpointAddress & USB_DIR_IN)
+ ss->ep_in =
+ iface->ep_desc[i].bEndpointAddress &
+ USB_ENDPOINT_NUMBER_MASK;
+ else
+ ss->ep_out =
+ iface->ep_desc[i].bEndpointAddress &
+ USB_ENDPOINT_NUMBER_MASK;
+ }
+
+ /* is it an interrupt endpoint? */
+ if ((iface->ep_desc[i].bmAttributes &
+ USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) {
+ ss->ep_int = iface->ep_desc[i].bEndpointAddress &
+ USB_ENDPOINT_NUMBER_MASK;
+ ss->irqinterval = iface->ep_desc[i].bInterval;
+ }
+ }
+ debug("Endpoints In %d Out %d Int %d\n",
+ ss->ep_in, ss->ep_out, ss->ep_int);
+
+ /* Do some basic sanity checks, and bail if we find a problem */
+ if (usb_set_interface(dev, iface_desc->bInterfaceNumber, 0) ||
+ !ss->ep_in || !ss->ep_out || !ss->ep_int) {
+ debug("Problems with device\n");
+ return 0;
+ }
+ dev->privptr = (void *)ss;
+ return 1;
+}
+
+int smsc95xx_eth_get_info(struct usb_device *dev, struct ueth_data *ss,
+ struct eth_device *eth)
+{
+ debug("** %s()\n", __func__);
+ if (!eth) {
+ debug("%s: missing parameter.\n", __func__);
+ return 0;
+ }
+ sprintf(eth->name, "%s%d", SMSC95XX_BASE_NAME, curr_eth_dev++);
+ eth->init = smsc95xx_init;
+ eth->send = smsc95xx_send;
+ eth->recv = smsc95xx_recv;
+ eth->halt = smsc95xx_halt;
+ eth->priv = ss;
+ return 1;
+}
diff --git a/drivers/usb/eth/usb_ether.c b/drivers/usb/eth/usb_ether.c
index 68a0883..7b55da3 100644
--- a/drivers/usb/eth/usb_ether.c
+++ b/drivers/usb/eth/usb_ether.c
@@ -45,6 +45,13 @@ static const struct usb_eth_prob_dev prob_dev[] = {
.get_info = asix_eth_get_info,
},
#endif
+#ifdef CONFIG_USB_ETHER_SMSC95XX
+ {
+ .before_probe = smsc95xx_eth_before_probe,
+ .probe = smsc95xx_eth_probe,
+ .get_info = smsc95xx_eth_get_info,
+ },
+#endif
{ }, /* END */
};
diff --git a/include/usb_ether.h b/include/usb_ether.h
index 825c275..a7fb26b 100644
--- a/include/usb_ether.h
+++ b/include/usb_ether.h
@@ -51,6 +51,11 @@ struct ueth_data {
unsigned char irqinterval; /* Intervall for IRQ Pipe */
/* private fields for each driver can go here if needed */
+#ifdef CONFIG_USB_ETHER_SMSC95XX
+ size_t rx_urb_size; /* maximum USB URB size */
+ u32 mac_cr; /* MAC control register value */
+ int have_hwaddr; /* 1 if we have a hardware MAC address */
+#endif
};
/*
@@ -65,4 +70,12 @@ int asix_eth_get_info(struct usb_device *dev, struct ueth_data *ss,
struct eth_device *eth);
#endif
+#ifdef CONFIG_USB_ETHER_SMSC95XX
+void smsc95xx_eth_before_probe(void);
+int smsc95xx_eth_probe(struct usb_device *dev, unsigned int ifnum,
+ struct ueth_data *ss);
+int smsc95xx_eth_get_info(struct usb_device *dev, struct ueth_data *ss,
+ struct eth_device *eth);
+#endif
+
#endif /* __USB_ETHER_H__ */
--
1.7.3.1
More information about the U-Boot
mailing list