[U-Boot] [PATCH v2] sh: Add Renesas rsk7264 board

Nobuhiro Iwamatsu iwamatsu at nigauri.org
Thu Jun 2 07:28:34 CEST 2011


Hi, Phil.

Applied to next branch.
Thanks!

Nobuhiro

2011/6/1 Phil Edworthy <PHIL.EDWORTHY at renesas.com>:
> The rsk7264 (also know as rsk2+sh7264) is an SH2A based board
> with 64MB NAND flash and 64MB SDRAM. It is very similar to the
> rsk7203 board.
>
> Signed-off-by: Phil Edworthy <phil.edworthy at renesas.com>
> Cc: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
> ---
> Changes for v2:
>   - Fixed condition check for scif3 code
>   - Added entry to MAINTAINERS
>
>  MAINTAINERS                           |    4 +
>  arch/sh/cpu/sh2/cpu.c                 |    7 +
>  arch/sh/include/asm/cpu_sh2.h         |    2 +
>  arch/sh/include/asm/cpu_sh7264.h      |   41 +++++++
>  board/renesas/rsk7264/Makefile        |   32 +++++
>  board/renesas/rsk7264/lowlevel_init.S |  212 +++++++++++++++++++++++++++++++++
>  board/renesas/rsk7264/rsk7264.c       |   72 +++++++++++
>  boards.cfg                            |    1 +
>  drivers/serial/serial_sh.h            |    5 +-
>  include/configs/rsk7264.h             |   99 +++++++++++++++
>  10 files changed, 474 insertions(+), 1 deletions(-)
>  create mode 100644 arch/sh/include/asm/cpu_sh7264.h
>  create mode 100644 board/renesas/rsk7264/Makefile
>  create mode 100644 board/renesas/rsk7264/lowlevel_init.S
>  create mode 100644 board/renesas/rsk7264/rsk7264.c
>  create mode 100644 include/configs/rsk7264.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index e2c48a8..e3dad81 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -142,6 +142,10 @@ Alex Dubov <oakad at yahoo.com>
>
>        mpq101          MPC8548
>
> +Phil Edworthy <phil.edworthy at renesas.com>
> +
> +       rsk7264         SH7264
> +
>  Dirk Eibach <eibach at gdsys.de>
>
>        devconcenter    PPC460EX
> diff --git a/arch/sh/cpu/sh2/cpu.c b/arch/sh/cpu/sh2/cpu.c
> index 6bbedd9..fff25ac 100644
> --- a/arch/sh/cpu/sh2/cpu.c
> +++ b/arch/sh/cpu/sh2/cpu.c
> @@ -33,6 +33,9 @@
>  #define scif0_enable() do {\
>                writeb(readb(STBCR4) & ~0x80, STBCR4);\
>        } while (0)
> +#define scif3_enable() do {\
> +               writeb(readb(STBCR4) & ~0x10, STBCR4);\
> +       } while (0)
>
>  int checkcpu(void)
>  {
> @@ -47,7 +50,11 @@ int checkcpu(void)
>  int cpu_init(void)
>  {
>        /* SCIF enable */
> +#if defined(CONFIG_CONS_SCIF3)
> +       scif3_enable();
> +#else
>        scif0_enable();
> +#endif
>        /* CMT clock enable */
>        cmt_clock_enable() ;
>        return 0;
> diff --git a/arch/sh/include/asm/cpu_sh2.h b/arch/sh/include/asm/cpu_sh2.h
> index 8bc9bc6..767e189 100644
> --- a/arch/sh/include/asm/cpu_sh2.h
> +++ b/arch/sh/include/asm/cpu_sh2.h
> @@ -33,6 +33,8 @@
>
>  #if defined(CONFIG_CPU_SH7203)
>  # include <asm/cpu_sh7203.h>
> +#elif defined(CONFIG_CPU_SH7264)
> +# include <asm/cpu_sh7264.h>
>  #else
>  # error "Unknown SH2 variant"
>  #endif
> diff --git a/arch/sh/include/asm/cpu_sh7264.h b/arch/sh/include/asm/cpu_sh7264.h
> new file mode 100644
> index 0000000..a4a4d51
> --- /dev/null
> +++ b/arch/sh/include/asm/cpu_sh7264.h
> @@ -0,0 +1,41 @@
> +#ifndef _ASM_CPU_SH7264_H_
> +#define _ASM_CPU_SH7264_H_
> +
> +/* Cache */
> +#define CCR1           0xFFFC1000
> +#define CCR            CCR1
> +
> +/* PFC */
> +#define PACR           0xA4050100
> +#define PBCR           0xA4050102
> +#define PCCR           0xA4050104
> +#define PETCR          0xA4050106
> +
> +/* Port Data Registers */
> +#define PADR           0xA4050120
> +#define PBDR           0xA4050122
> +#define PCDR           0xA4050124
> +
> +/* BSC */
> +
> +/* SDRAM controller */
> +
> +/* SCIF */
> +#define SCSMR_3                0xFFFE9800
> +#define SCIF3_BASE     SCSMR_3
> +
> +/* Timer(CMT) */
> +#define CMSTR          0xFFFEC000
> +#define CMCSR_0        0xFFFEC002
> +#define CMCNT_0        0xFFFEC004
> +#define CMCOR_0        0xFFFEC006
> +#define CMCSR_1        0xFFFEC008
> +#define CMCNT_1        0xFFFEC00A
> +#define CMCOR_1                0xFFFEC00C
> +
> +/* On chip oscillator circuits */
> +#define FRQCR          0xA415FF80
> +#define WTCNT          0xA415FF84
> +#define WTCSR          0xA415FF86
> +
> +#endif /* _ASM_CPU_SH7264_H_ */
> diff --git a/board/renesas/rsk7264/Makefile b/board/renesas/rsk7264/Makefile
> new file mode 100644
> index 0000000..a0ffc87
> --- /dev/null
> +++ b/board/renesas/rsk7264/Makefile
> @@ -0,0 +1,32 @@
> +#
> +# Copyright (C) 2011 Renesas Electronics Europe Ltd.
> +#
> +# This file is released under the terms of GPL v2 and any later version.
> +# See the file COPYING in the root directory of the source tree for details.
> +
> +include $(TOPDIR)/config.mk
> +
> +LIB    = lib$(BOARD).o
> +
> +OBJS   := rsk7264.o
> +SOBJS  := lowlevel_init.o
> +
> +LIB    := $(addprefix $(obj),$(LIB))
> +OBJS   := $(addprefix $(obj),$(OBJS))
> +SOBJS  := $(addprefix $(obj),$(SOBJS))
> +
> +$(LIB):        $(obj).depend $(OBJS) $(SOBJS)
> +       $(call cmd_link_o_target, $(OBJS) $(SOBJS))
> +
> +clean:
> +       rm -f $(SOBJS) $(OBJS)
> +
> +distclean:     clean
> +       rm -f $(LIB) core *.bak .depend
> +
> +#########################################################################
> +
> +# defines $(obj).depend target
> +include $(SRCTREE)/rules.mk
> +
> +sinclude $(obj).depend
> diff --git a/board/renesas/rsk7264/lowlevel_init.S b/board/renesas/rsk7264/lowlevel_init.S
> new file mode 100644
> index 0000000..fc759bd
> --- /dev/null
> +++ b/board/renesas/rsk7264/lowlevel_init.S
> @@ -0,0 +1,212 @@
> +/*
> + * Copyright (C) 2011 Renesas Electronics Europe Ltd.
> + * Copyright (C) 2008 Renesas Solutions Corp.
> + * Copyright (C) 2008 Nobuhiro Iwamatsu
> + *
> + * Based on board/renesas/rsk7203/lowlevel_init.S
> + *
> + * This file is released under the terms of GPL v2 and any later version.
> + * See the file COPYING in the root directory of the source tree for details.
> + */
> +#include <config.h>
> +#include <version.h>
> +
> +#include <asm/processor.h>
> +#include <asm/macro.h>
> +
> +       .global lowlevel_init
> +
> +       .text
> +       .align  2
> +
> +lowlevel_init:
> +       /* Cache setting */
> +       write32 CCR1_A ,CCR1_D
> +
> +       /* io_set_cpg */
> +       write8 STBCR3_A, STBCR3_D
> +       write8 STBCR4_A, STBCR4_D
> +       write8 STBCR5_A, STBCR5_D
> +       write8 STBCR6_A, STBCR6_D
> +       write8 STBCR7_A, STBCR7_D
> +       write8 STBCR8_A, STBCR8_D
> +
> +       /* ConfigurePortPins */
> +
> +       /* Leaving LED1 ON for sanity test */
> +       write16 PJCR1_A, PJCR1_D1
> +       write16 PJCR2_A, PJCR2_D
> +       write16 PJIOR0_A, PJIOR0_D1
> +       write16 PJDR0_A, PJDR0_D
> +       write16 PJPR0_A, PJPR0_D
> +
> +       /* Configure EN_PIN & RS_PIN */
> +       write16 PGCR2_A, PGCR2_D
> +       write16 PGIOR0_A, PGIOR0_D
> +
> +       /* Configure the port pins connected to UART */
> +       write16 PJCR1_A, PJCR1_D2
> +       write16 PJIOR0_A, PJIOR0_D2
> +
> +       /* Configure Operating Frequency */
> +       write16 WTCSR_A, WTCSR_D0
> +       write16 WTCSR_A, WTCSR_D1
> +       write16 WTCNT_A, WTCNT_D
> +
> +       /* Control of RESBANK */
> +       write16 IBNR_A, IBNR_D
> +       /* Enable SCIF3 module */
> +       write16 STBCR4_A, STBCR4_D
> +
> +       /* Set clock mode*/
> +       write16 FRQCR_A, FRQCR_D
> +
> +       /* Configure Bus And Memory */
> +init_bsc_cs0:
> +
> +pfc_settings:
> +       write16 PCCR2_A, PCCR2_D
> +       write16 PCCR1_A, PCCR1_D
> +       write16 PCCR0_A, PCCR0_D
> +
> +       write16 PBCR0_A, PBCR0_D
> +       write16 PBCR1_A, PBCR1_D
> +       write16 PBCR2_A, PBCR2_D
> +       write16 PBCR3_A, PBCR3_D
> +       write16 PBCR4_A, PBCR4_D
> +       write16 PBCR5_A, PBCR5_D
> +
> +       write16 PDCR0_A, PDCR0_D
> +       write16 PDCR1_A, PDCR1_D
> +       write16 PDCR2_A, PDCR2_D
> +       write16 PDCR3_A, PDCR3_D
> +
> +       write32 CS0WCR_A, CS0WCR_D
> +       write32 CS0BCR_A, CS0BCR_D
> +
> +init_bsc_cs2:
> +       write16 PJCR0_A, PJCR0_D
> +       write32 CS2WCR_A, CS2WCR_D
> +
> +init_sdram:
> +       write32 CS3BCR_A, CS3BCR_D
> +       write32 CS3WCR_A, CS3WCR_D
> +       write32 SDCR_A, SDCR_D
> +       write32 RTCOR_A, RTCOR_D
> +       write32 RTCSR_A, RTCSR_D
> +
> +       /* wait 200us */
> +       mov.l   REPEAT_D, r3
> +       mov     #0, r2
> +repeat0:
> +       add     #1, r2
> +       cmp/hs  r3, r2
> +       bf      repeat0
> +       nop
> +
> +       mov.l   SDRAM_MODE, r1
> +       mov     #0, r0
> +       mov.l   r0, @r1
> +
> +       nop
> +       rts
> +
> +       .align 4
> +
> +CCR1_A:                .long CCR1
> +CCR1_D:                .long 0x0000090B
> +FRQCR_A:       .long 0xFFFE0010
> +FRQCR_D:       .word 0x1003
> +.align 2
> +STBCR3_A:      .long 0xFFFE0408
> +STBCR3_D:      .long 0x00000002
> +STBCR4_A:      .long 0xFFFE040C
> +STBCR4_D:      .word 0x0000
> +.align 2
> +STBCR5_A:      .long 0xFFFE0410
> +STBCR5_D:      .long 0x00000010
> +STBCR6_A:      .long 0xFFFE0414
> +STBCR6_D:      .long 0x00000002
> +STBCR7_A:      .long 0xFFFE0418
> +STBCR7_D:      .long 0x0000002A
> +STBCR8_A:      .long 0xFFFE041C
> +STBCR8_D:      .long 0x0000007E
> +PJCR1_A:       .long 0xFFFE390C
> +PJCR1_D1:      .word 0x0000
> +PJCR1_D2:      .word 0x0022
> +PJCR2_A:       .long 0xFFFE390A
> +PJCR2_D:       .word 0x0000
> +.align 2
> +PJIOR0_A:      .long 0xFFFE3912
> +PJIOR0_D1:     .word 0x0FC0
> +PJIOR0_D2:     .word 0x0FE0
> +PJDR0_A:       .long 0xFFFE3916
> +PJDR0_D:       .word 0x0FBF
> +.align 2
> +PJPR0_A:       .long 0xFFFE391A
> +PJPR0_D:       .long 0x00000FBF
> +PGCR2_A:       .long 0xFFFE38CA
> +PGCR2_D:       .word 0x0000
> +.align 2
> +PGIOR0_A:      .long 0xFFFE38D2
> +PGIOR0_D:      .word 0x03F0
> +.align 2
> +WTCSR_A:       .long 0xFFFE0000
> +WTCSR_D0:      .word 0x0000
> +WTCSR_D1:      .word 0x0000
> +WTCNT_A:       .long 0xFFFE0002
> +WTCNT_D:       .word 0x0000
> +.align 2
> +PCCR0_A:       .long 0xFFFE384E
> +PDCR0_A:       .long 0xFFFE386E
> +PDCR1_A:       .long 0xFFFE386C
> +PDCR2_A:       .long 0xFFFE386A
> +PDCR3_A:       .long 0xFFFE3868
> +PBCR0_A:       .long 0xFFFE382E
> +PBCR1_A:       .long 0xFFFE382C
> +PBCR2_A:       .long 0xFFFE382A
> +PBCR3_A:       .long 0xFFFE3828
> +PBCR4_A:       .long 0xFFFE3826
> +PBCR5_A:       .long 0xFFFE3824
> +PCCR0_D:       .word 0x1111
> +PDCR0_D:       .word 0x1111
> +PDCR1_D:       .word 0x1111
> +PDCR2_D:       .word 0x1111
> +PDCR3_D:       .word 0x1111
> +PBCR0_D:       .word 0x1110
> +PBCR1_D:       .word 0x1111
> +PBCR2_D:       .word 0x1111
> +PBCR3_D:       .word 0x1111
> +PBCR4_D:       .word 0x1111
> +PBCR5_D:       .word 0x0111
> +.align 2
> +CS0WCR_A:      .long 0xFFFC0028
> +CS0WCR_D:      .long 0x00000B41
> +CS0BCR_A:      .long 0xFFFC0004
> +CS0BCR_D:      .long 0x10000400
> +PJCR0_A:       .long 0xFFFE390E
> +PJCR0_D:       .word 0x0300
> +.align 2
> +CS2WCR_A:      .long 0xFFFC0030
> +CS2WCR_D:      .long 0x00000B01
> +PCCR2_A:       .long 0xFFFE384A
> +PCCR2_D:       .word 0x0001
> +.align 2
> +PCCR1_A:       .long 0xFFFE384C
> +PCCR1_D:       .word 0x1111
> +.align 2
> +CS3BCR_A:      .long 0xFFFC0010
> +CS3BCR_D:      .long 0x00004400
> +CS3WCR_A:      .long 0xFFFC0034
> +CS3WCR_D:      .long 0x0000288A
> +SDCR_A:                .long 0xFFFC004C
> +SDCR_D:                .long 0x00000812
> +RTCOR_A:       .long 0xFFFC0058
> +RTCOR_D:       .long 0xA55A0046
> +RTCSR_A:       .long 0xFFFC0050
> +RTCSR_D:       .long 0xA55A0010
> +IBNR_A:                .long 0xFFFE080E
> +IBNR_D:        .word 0x0000
> +.align 2
> +SDRAM_MODE:    .long 0xFFFC5040
> +REPEAT_D:      .long 0x00000085
> diff --git a/board/renesas/rsk7264/rsk7264.c b/board/renesas/rsk7264/rsk7264.c
> new file mode 100644
> index 0000000..c23815d
> --- /dev/null
> +++ b/board/renesas/rsk7264/rsk7264.c
> @@ -0,0 +1,72 @@
> +/*
> + * Copyright (C) 2011 Renesas Electronics Europe Ltd.
> + * Copyright (C) 2008 Renesas Solutions Corp.
> + * Copyright (C) 2008 Nobuhiro Iwamatsu
> + *
> + * Based on u-boot/board/rsk7264/rsk7203.c
> + *
> + * This file is released under the terms of GPL v2 and any later version.
> + * See the file COPYING in the root directory of the source tree for details.
> + */
> +
> +#include <common.h>
> +#include <net.h>
> +#include <netdev.h>
> +#include <asm/io.h>
> +#include <asm/processor.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +int checkboard(void)
> +{
> +       puts("BOARD: Renesas Technology RSK7264\n");
> +       return 0;
> +}
> +
> +int board_init(void)
> +{
> +       return 0;
> +}
> +
> +int dram_init(void)
> +{
> +       gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
> +       gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
> +       printf("DRAM:  %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
> +       return 0;
> +}
> +
> +void led_set_state(unsigned short value)
> +{
> +}
> +
> +/*
> + * The RSK board has the SMSC89218 wired up 'incorrectly'.
> + * Byte-swapping is necessary, and so poor performance is inevitable.
> + * This problem cannot evade by the swap function of CHIP, this can
> + * evade by software Byte-swapping.
> + * And this has problem by FIFO access only. pkt_data_pull/pkt_data_push
> + * functions necessary to solve this problem.
> + */
> +u32 pkt_data_pull(struct eth_device *dev, u32 addr)
> +{
> +       volatile u16 *addr_16 = (u16 *)(dev->iobase + addr);
> +       return (u32)((swab16(*addr_16) << 16) & 0xFFFF0000)\
> +                               | swab16(*(addr_16 + 1));
> +}
> +
> +void pkt_data_push(struct eth_device *dev, u32 addr, u32 val)
> +{
> +       addr += dev->iobase;
> +       *(volatile u16 *)(addr + 2) = swab16((u16)val);
> +       *(volatile u16 *)(addr) = swab16((u16)(val >> 16));
> +}
> +
> +int board_eth_init(bd_t *bis)
> +{
> +       int rc = 0;
> +#ifdef CONFIG_SMC911X
> +       rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
> +#endif
> +       return rc;
> +}
> diff --git a/boards.cfg b/boards.cfg
> index 9f2b118..23c18fc 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -821,6 +821,7 @@ xilinx-ppc405-generic_flash  powerpc     ppc4xx      ppc405-generic      xilinx
>  xilinx-ppc440-generic        powerpc     ppc4xx      ppc440-generic      xilinx         -           xilinx-ppc440-generic:SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,BOOT_FROM_XMD=1
>  xilinx-ppc440-generic_flash  powerpc     ppc4xx      ppc440-generic      xilinx         -           xilinx-ppc440-generic:SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC
>  rsk7203                      sh          sh2         rsk7203             renesas        -
> +rsk7264                      sh          sh2         rsk7264             renesas        -
>  mpr2                         sh          sh3         mpr2                -              -
>  ms7720se                     sh          sh3         ms7720se            -              -
>  shmin                        sh          sh3         shmin               -              -
> diff --git a/drivers/serial/serial_sh.h b/drivers/serial/serial_sh.h
> index e19593c..4e16e48 100644
> --- a/drivers/serial/serial_sh.h
> +++ b/drivers/serial/serial_sh.h
> @@ -177,7 +177,8 @@ struct uart_port {
>  #elif defined(CONFIG_CPU_SH7201) || \
>        defined(CONFIG_CPU_SH7203) || \
>        defined(CONFIG_CPU_SH7206) || \
> -       defined(CONFIG_CPU_SH7263)
> +       defined(CONFIG_CPU_SH7263) || \
> +       defined(CONFIG_CPU_SH7264)
>  # define SCSPTR0 0xfffe8020 /* 16 bit SCIF */
>  # define SCSPTR1 0xfffe8820 /* 16 bit SCIF */
>  # define SCSPTR2 0xfffe9020 /* 16 bit SCIF */
> @@ -685,6 +686,8 @@ static inline int scbrr_calc(struct uart_port port, int bps, int clk)
>  #define SCBRR_VALUE(bps, clk) scbrr_calc(sh_sci, bps, clk)
>  #elif defined(__H8300H__) || defined(__H8300S__)
>  #define SCBRR_VALUE(bps, clk) (((clk*1000/32)/bps)-1)
> +#elif defined(CONFIG_CPU_SH7264)
> +#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps))
>  #else /* Generic SH */
>  #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1)
>  #endif
> diff --git a/include/configs/rsk7264.h b/include/configs/rsk7264.h
> new file mode 100644
> index 0000000..aef37d0
> --- /dev/null
> +++ b/include/configs/rsk7264.h
> @@ -0,0 +1,99 @@
> +/*
> + * Configuation settings for the Renesas Technology RSK 7264
> + *
> + * Copyright (C) 2011 Renesas Electronics Europe Ltd.
> + * Copyright (C) 2008 Nobuhiro Iwamatsu
> + * Copyright (C) 2008 Renesas Solutions Corp.
> + *
> + * This file is released under the terms of GPL v2 and any later version.
> + * See the file COPYING in the root directory of the source tree for details.
> + */
> +
> +#ifndef __RSK7264_H
> +#define __RSK7264_H
> +
> +#undef DEBUG
> +#define CONFIG_SH              1
> +#define CONFIG_SH2             1
> +#define CONFIG_SH2A            1
> +#define CONFIG_CPU_SH7264      1
> +#define CONFIG_RSK7264 1
> +
> +#define CONFIG_CMD_FLASH
> +#define CONFIG_CMD_NET
> +#define CONFIG_CMD_NFS
> +#define CONFIG_CMD_PING
> +#define CONFIG_CMD_SAVEENV
> +#define CONFIG_CMD_SDRAM
> +#define CONFIG_CMD_MEMORY
> +#define CONFIG_CMD_CACHE
> +
> +#define CONFIG_BAUDRATE                115200
> +#define CONFIG_BOOTARGS                "console=ttySC3,115200"
> +#define CONFIG_BOOTDELAY       3
> +#define CONFIG_LOADADDR                0x0C100000 /* RSK7264_SDRAM_BASE + 1MB */
> +
> +#define CONFIG_VERSION_VARIABLE
> +#undef CONFIG_SHOW_BOOT_PROGRESS
> +
> +/* MEMORY */
> +#define RSK7264_SDRAM_BASE     0x0C000000
> +#define RSK7264_FLASH_BASE_1   0x20000000      /* Non cache */
> +
> +#define CONFIG_SYS_TEXT_BASE   0x0C1C0000
> +#define CONFIG_SYS_LONGHELP            /* undef to save memory */
> +#define CONFIG_SYS_PROMPT      "=> "   /* Monitor Command Prompt */
> +#define CONFIG_SYS_CBSIZE      256     /* Buffer size for input from the Console */
> +#define CONFIG_SYS_PBSIZE      256     /* Buffer size for Console output */
> +#define CONFIG_SYS_MAXARGS     16      /* max args accepted for monitor commands */
> +/* Buffer size for Boot Arguments passed to kernel */
> +#define CONFIG_SYS_BARGSIZE    512
> +/* List of legal baudrate settings for this board */
> +#define CONFIG_SYS_BAUDRATE_TABLE      { 115200 }
> +
> +/* SCIF */
> +#define CONFIG_SCIF_CONSOLE    1
> +#define CONFIG_CONS_SCIF3      1
> +
> +#define CONFIG_SYS_MEMTEST_START       RSK7264_SDRAM_BASE
> +#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + (3 * 1024 * 1024))
> +
> +#define CONFIG_SYS_SDRAM_BASE          RSK7264_SDRAM_BASE
> +#define CONFIG_SYS_SDRAM_SIZE          (64 * 1024 * 1024)
> +
> +#define CONFIG_SYS_LOAD_ADDR           (CONFIG_SYS_SDRAM_BASE + 1024 * 1024)
> +#define CONFIG_SYS_MONITOR_BASE                RSK7264_FLASH_BASE_1
> +#define CONFIG_SYS_MONITOR_LEN         (128 * 1024)
> +#define CONFIG_SYS_MALLOC_LEN          (256 * 1024)
> +#define CONFIG_SYS_BOOTMAPSZ           (8 * 1024 * 1024)
> +
> +/* FLASH */
> +#define CONFIG_FLASH_CFI_DRIVER
> +#define CONFIG_SYS_FLASH_CFI
> +#define CONFIG_SYS_FLASH_CFI_WIDTH     FLASH_CFI_16BIT
> +#undef CONFIG_SYS_FLASH_QUIET_TEST
> +#define CONFIG_SYS_FLASH_EMPTY_INFO    /* print 'E' for empty sector on flinfo */
> +#define CONFIG_SYS_FLASH_BASE          RSK7264_FLASH_BASE_1
> +#define CONFIG_SYS_FLASH_BANKS_LIST    { CONFIG_SYS_FLASH_BASE }
> +#define CONFIG_SYS_MAX_FLASH_SECT      512
> +#define CONFIG_SYS_MAX_FLASH_BANKS     1
> +
> +#define CONFIG_ENV_IS_IN_FLASH
> +#define CONFIG_ENV_SECT_SIZE   (128 * 1024)
> +#define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
> +#define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
> +#define CONFIG_SYS_FLASH_ERASE_TOUT    120000
> +#define CONFIG_SYS_FLASH_WRITE_TOUT    500
> +
> +/* Board Clock */
> +#define CONFIG_SYS_CLK_FREQ    33333333
> +#define CMT_CLK_DIVIDER        32      /* 8 (default), 32, 128 or 512 */
> +#define CONFIG_SYS_HZ          (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
> +
> +/* Network interface */
> +#define CONFIG_NET_MULTI
> +#define CONFIG_SMC911X
> +#define CONFIG_SMC911X_16_BIT
> +#define CONFIG_SMC911X_BASE (0x28000000)
> +
> +#endif /* __RSK7264_H */
> --
> 1.7.0.4
>



-- 
Nobuhiro Iwamatsu
   iwamatsu at {nigauri.org / debian.org}
   GPG ID: 40AD1FA6


More information about the U-Boot mailing list