[U-Boot] [PATCH 2/7] powerpc/mpc8xxx: adjust DDR burst length and chop accroding to sdram width

[Kumar Gala]

On May 26, 2011, at 6:25 PM, York Sun wrote:

> From: york <yorksun at freescale.com>
> 
> If the bus width is 32-bit, burst chop should be disabled and burst length
> should be 8. Read from SPD or other source to determine the width.
> 
> Signed-off-by: York Sun <yorksun at freescale.com>
> ---
> arch/powerpc/cpu/mpc8xxx/ddr/options.c |   24 ++++++++++++++++++++----
> 1 files changed, 20 insertions(+), 4 deletions(-)

applied to 85xx next

- k