[U-Boot] [PATCH 6/7] powerpc/mpc8xxx: Adding fallback to raw timing on supported boards

[York Sun]

On Fri, 2011-06-03 at 02:46 -0500, Kumar Gala wrote:
> On May 26, 2011, at 6:25 PM, York Sun wrote:
> 
> > In case of empty SPD or checksum error, fallback to raw timing on
> > supported boards.
> > 
> > Signed-off-by: York Sun <yorksun at freescale.com>
> > ---
> > arch/powerpc/cpu/mpc8xxx/ddr/main.c |    8 ++++++++
> > 1 files changed, 8 insertions(+), 0 deletions(-)
> > 
> > diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
> > index db7cf11..2e43da6 100644
> > --- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c
> > +++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
> > @@ -343,12 +343,20 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step,
> > 					&(pinfo->dimm_params[i][j]);
> > 
> > 				retval = compute_dimm_parameters(spd, pdimm, i);
> > +#ifdef CONFIG_DDR_RAW_TIMING
> 
> Should this be CONFIG_SYS_DDR_RAW_TIMING??
> 
> We need this added to README at a minimum for what DDR_RAW_TIMING means.
> 

Will do.

York