[U-Boot] [PATCH v3] mx31ads: Use the new relocation scheme

[Felix Radensky]

Hi Fabio,


On 01/-10/-28163 09:59 PM,  wrote:
> Signed-off-by: Fabio Estevam fabio.estevam at freescale.com
> ---
> Changes since v2:
> - Use PHYS_SDRAM_1 in get_ram_size
> - Remove local config.mk
>
> Changes since v1:
>
> - Fixed lines over 80 characters.
>
> Build tested only.
>
> Do not have the hardware handy to test.
>

I've tested your patch on mx31ads. Unfortunately it bricks the board.
There are no messages on console. The latest u-boot version that
works on this board is 2010.09. I've compiled u-boot using ELDK-4.2.

If you have any ideas, I'm ready to test your patches.

Felix.