[U-Boot] Question re: Bluewater Systems Snapper 9260 and 9G20 modules patch

Simon Glass sglass at bluewatersys.com
Sun Jun 5 05:56:12 CEST 2011


Hi Eric,

Thanks - but the bigger problem is that snapper9260.c isn't even in the
repository!

Regards,
Simon

On Sat, Jun 4, 2011 at 1:50 PM, Eric Bénard <eric at eukrea.com> wrote:

> Hi Simon,
>
> On 04/06/2011 20:47, Simon Glass wrote:
> > Hi Reinhard,
> >
> > I have been asked to have a quick look at this patch, which is showing
> > accepted here:
> >
> > http://patchwork.ozlabs.org/patch/81422/
> >
> > The diffstat on patchwork is:
> >
> >   MAINTAINERS                               |    5 +
> >   board/bluewater/snapper9260/Makefile      |   53 ++++++++
> >   board/bluewater/snapper9260/snapper9260.c |  169
> +++++++++++++++++++++++++
> >   boards.cfg                                |    2 +
> >   include/configs/snapper9260.h             |  191
> +++++++++++++++++++++++++++++
> >   5 files changed, 420 insertions(+), 0 deletions(-)
> >   create mode 100644 board/bluewater/snapper9260/Makefile
> >   create mode 100644 board/bluewater/snapper9260/snapper9260.c
> >   create mode 100644 include/configs/snapper9260.h
> >
> > but when I look at the commit I only see this:
> >
> > git log --author=Ryan --stat
> > commit 74cd9777f8dd44fd944a9ac75cfbc24eeb206453
> > Author: Ryan Mallon<ryan at bluewatersys.com>
> > Date:   Tue Feb 1 16:18:00 2011 +0000
> >
> >      Add support for Bluewater Systems Snapper 9260 and 9G20 modules
> >
> >      Add support for Bluewater Systems AT91 based Snapper 9260 and 9G20
> >      single board computer modules. Includes NAND flash and Ethernet
> >      support.
> >
> >      Signed-off-by: Ryan Mallon<ryan at bluewatersys.com>
> >
> >   boards.cfg |    2 ++
> >   1 files changed, 2 insertions(+), 0 deletions(-)
> >
> >
> > As a result it does not build. Has something been dropped by mistake?
> >
> 9260 seems broken (and also arch/arm/cpu/arm926ejs/at91/lowlevel_init.S),
> this
> may help :
>
> diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
> b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
> index 6bdc75c..ace1ca8 100644
> --- a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
> +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
> @@ -24,9 +24,10 @@
>
>  #include <common.h>
>  #include <asm/io.h>
> +#include <asm/arch/hardware.h>
>  #include <asm/arch/at91_common.h>
>  #include <asm/arch/at91_pmc.h>
> -#include <asm/arch/gpio.h>
> +#include <asm/arch/at91_pio.h>
>
>  /*
>   * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>



-- 

  * Design A*   Simon Glass
sglass at designa-electronics.com
www.designa-electronics.com
 5 Amuri Park, 404 Barbadoes St
PO Box 13 889, Christchurch 8013
New Zealand
  Phone +64 3 3779127
Fax +64 3 3779135
  Freecall:Australia 1800 148 751  USA 1800 261 2934


More information about the U-Boot mailing list