[U-Boot] [PATCH v3] mx31ads: Use the new relocation scheme

[Fabio Estevam]

Hi Felix,

On Sun, Jun 5, 2011 at 4:28 AM, Felix Radensky <felix at embedded-sol.com> wrote:
...
> Setting CONFIG_SYS_TEXT_BASE to 0xa0000000 in mx31ads.h
> fixes the problem.

Excellent!

> You can add
>
> Tested-by: Felix Radensky felix at embedded-sol.com

Ok, I will send v4 of this patch tomorrow and will add your Tested-by line then.

> Unrelated to your patch, u-boot prints
>
> CPU:   Freescale i.MX31 rev 2.0 unknown at 531 MHz.Reset cause: WDOG
>
> Do you think "unknown" can be replaced by something more meaningful ?

Yes, I agree. This is common MX31 code and I will take a look at fixing it.

> Also, environment settings are completely broken, environment address
> clashes with u-boot address. I'll submit a patch to fix that after your
> patch
> goes in.

Sounds like a good plan.

> Thanks for your efforts to keep this board support alive.

and thankyou for testing it :-)

Regards,

Fabio Estevam