[U-Boot] [PATCH 2/3 v2] dreamplug: switch from NAND flash to SPI flash.
u-boot at lakedaemon.net
u-boot at lakedaemon.net
Mon Jun 6 14:34:08 CEST 2011
From: Jason Cooper <u-boot at lakedaemon.net>
MPP._SPI_ configuration copied from
boards/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c
Signed-off-by: Jason Cooper <u-boot at lakedaemon.net>
---
board/Marvell/dreamplug/dreamplug.c | 18 +++++++++---------
board/Marvell/dreamplug/kwbimage.cfg | 4 +---
include/configs/dreamplug.h | 2 +-
3 files changed, 11 insertions(+), 13 deletions(-)
diff --git a/board/Marvell/dreamplug/dreamplug.c b/board/Marvell/dreamplug/dreamplug.c
index 32d82ba..6442396 100644
--- a/board/Marvell/dreamplug/dreamplug.c
+++ b/board/Marvell/dreamplug/dreamplug.c
@@ -43,14 +43,14 @@ int board_early_init_f(void)
/* Multi-Purpose Pins Functionality configuration */
u32 kwmpp_config[] = {
- MPP0_NF_IO2,
- MPP1_NF_IO3,
- MPP2_NF_IO4,
- MPP3_NF_IO5,
- MPP4_NF_IO6,
- MPP5_NF_IO7,
+ MPP0_SPI_SCn,
+ MPP1_SPI_MOSI,
+ MPP2_SPI_SCK,
+ MPP3_SPI_MISO,
+ MPP4_GPIO,
+ MPP5_GPO,
MPP6_SYSRST_OUTn,
- MPP7_GPO, /* GPIO_RST */
+ MPP7_SPI_SCn,
MPP8_TW_SDA,
MPP9_TW_SCK,
MPP10_UART0_TXD,
@@ -61,8 +61,8 @@ int board_early_init_f(void)
MPP15_SD_D1,
MPP16_SD_D2,
MPP17_SD_D3,
- MPP18_NF_IO0,
- MPP19_NF_IO1,
+ MPP18_GPO,
+ MPP19_GPO,
MPP20_GE1_0,
MPP21_GE1_1,
MPP22_GE1_2,
diff --git a/board/Marvell/dreamplug/kwbimage.cfg b/board/Marvell/dreamplug/kwbimage.cfg
index 2afd927..ae76b32 100644
--- a/board/Marvell/dreamplug/kwbimage.cfg
+++ b/board/Marvell/dreamplug/kwbimage.cfg
@@ -26,9 +26,7 @@
#
# Boot Media configurations
-BOOT_FROM nand
-NAND_ECC_MODE default
-NAND_PAGE_SIZE 0x0800
+BOOT_FROM spi
# SOC registers configuration using bootrom header extension
# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h
index 7b494cc..bf477b2 100644
--- a/include/configs/dreamplug.h
+++ b/include/configs/dreamplug.h
@@ -47,7 +47,7 @@
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ENV
#define CONFIG_CMD_FAT
-#define CONFIG_CMD_NAND
+#define CONFIG_CMD_SF
#define CONFIG_CMD_PING
#define CONFIG_CMD_USB
#define CONFIG_CMD_IDE
--
1.7.0.4
More information about the U-Boot
mailing list