[U-Boot] [PATCH 0/3 v2] RFC: Dreamplug support
Jason
u-boot at lakedaemon.net
Tue Jun 7 19:06:04 CEST 2011
Prafulla,
Thanks for the input! I assume the SPI flash implementation looked ok?
On Mon, Jun 06, 2011 at 11:47:15PM -0700, Prafulla Wadaskar wrote:
>
> > -----Original Message-----
> > From: u-boot at lakedaemon.net [mailto:u-boot at lakedaemon.net]
> > Sent: Monday, June 06, 2011 6:04 PM
> > To: u-boot at lists.denx.de
> > Cc: Prafulla Wadaskar; Jason Cooper
> > Subject: [PATCH 0/3 v2] RFC: Dreamplug support
> >
> > 3.) I added the board number [2], etc to asm/mach-types.h even
> > though it says to not to. ;-) Is there a proper way to do it?
> > If it's copied from the Linux kernel, it hasn't been updated in
> > a while...
>
> No, the proper way is- you should add board first to arm-linux, then
> the updated mach-types.h will be updated by arm maintainer on u-boot,
> then you can add your board support.
>
Ok, I'll starting working on the Linux side as well.
> >
> > [2] http://www.arm.linux.org.uk/developer/machines/list.php?id=3550
> >
> >
> > Changes from v1 to v2:
> >
> > - resorted series to move 'make all' support last.
> >
> >
> > Jason Cooper (3):
> > dreamplug: Initial support.
> > dreamplug: switch from NAND flash to SPI flash.
> > dreamplug: include in 'make all'
> >
> > MAKEALL | 1 +
> > arch/arm/include/asm/mach-types.h | 13 +++
>
> No patch for this file, follow process explained above.
>
So, in the interim, I'll resubmit using the guruplug board id, then
submit separate patch after the Linux support is accepted.
> > board/Marvell/dreamplug/Makefile | 51 +++++++++++
> > board/Marvell/dreamplug/dreamplug.c | 153
> > ++++++++++++++++++++++++++++++++
> > board/Marvell/dreamplug/dreamplug.h | 39 ++++++++
> > board/Marvell/dreamplug/kwbimage.cfg | 160
> > ++++++++++++++++++++++++++++++++++
> > boards.cfg | 1 +
> > include/configs/dreamplug.h | 111 +++++++++++++++++++++++
>
> You should update MAINTAINERS file too.
>
Ok, I'll add Dreamplug under Siddarth Gore.
> Regards..
> Prafulla . .
More information about the U-Boot
mailing list