[U-Boot] [PATCH 1/2] at91: move a/a/c/arm926ejs/at91/clock.c -> a/a/lib/at91
Andreas Bießmann
andreas.devel at googlemail.com
Wed Jun 8 01:27:57 CEST 2011
The at91/clock.c is copied from linux kernel and has support for both
arm920t and arm926ejs core devices. Therefore this patch moves this
generic at91/clock.c to a new place at arch/arm/lib/at91 to be used from
at91 family devices.
We build a new libat91-common.o to provide the required symbols to both
cpu types.
Signed-off-by: Andreas Bießmann <andreas.devel at googlemail.com>
---
Makefile | 3 +
arch/arm/cpu/arm926ejs/at91/Makefile | 1 -
arch/arm/cpu/arm926ejs/at91/clock.c | 215 ----------------------------------
arch/arm/lib/at91/Makefile | 45 +++++++
arch/arm/lib/at91/clock.c | 215 ++++++++++++++++++++++++++++++++++
5 files changed, 263 insertions(+), 216 deletions(-)
delete mode 100644 arch/arm/cpu/arm926ejs/at91/clock.c
create mode 100644 arch/arm/lib/at91/Makefile
create mode 100644 arch/arm/lib/at91/clock.c
diff --git a/Makefile b/Makefile
index 76124e5..64e47c7 100644
--- a/Makefile
+++ b/Makefile
@@ -189,6 +189,9 @@ LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \
LIBS += $(CPUDIR)/lib$(CPU).o
ifdef SOC
LIBS += $(CPUDIR)/$(SOC)/lib$(SOC).o
+ifeq ($(SOC),at91)
+LIBS += arch/arm/lib/at91/libat91-common.o
+endif
endif
ifeq ($(CPU),ixp)
LIBS += arch/arm/cpu/ixp/npe/libnpe.o
diff --git a/arch/arm/cpu/arm926ejs/at91/Makefile b/arch/arm/cpu/arm926ejs/at91/Makefile
index f333753..ee66b3d 100644
--- a/arch/arm/cpu/arm926ejs/at91/Makefile
+++ b/arch/arm/cpu/arm926ejs/at91/Makefile
@@ -37,7 +37,6 @@ COBJS-$(CONFIG_AT91SAM9M10G45) += at91sam9m10g45_devices.o
COBJS-$(CONFIG_AT91SAM9G45) += at91sam9m10g45_devices.o
COBJS-$(CONFIG_AT91_EFLASH) += eflash.o
COBJS-$(CONFIG_AT91_LED) += led.o
-COBJS-y += clock.o
COBJS-y += cpu.o
COBJS-y += reset.o
COBJS-y += timer.o
diff --git a/arch/arm/cpu/arm926ejs/at91/clock.c b/arch/arm/cpu/arm926ejs/at91/clock.c
deleted file mode 100644
index 608af2c..0000000
--- a/arch/arm/cpu/arm926ejs/at91/clock.c
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- * [origin: Linux kernel linux/arch/arm/mach-at91/clock.c]
- *
- * Copyright (C) 2005 David Brownell
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/clk.h>
-
-#if !defined(CONFIG_AT91FAMILY)
-# error You need to define CONFIG_AT91FAMILY in your board config!
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-unsigned long get_cpu_clk_rate(void)
-{
- return gd->cpu_clk_rate_hz;
-}
-
-unsigned long get_main_clk_rate(void)
-{
- return gd->main_clk_rate_hz;
-}
-
-unsigned long get_mck_clk_rate(void)
-{
- return gd->mck_rate_hz;
-}
-
-unsigned long get_plla_clk_rate(void)
-{
- return gd->plla_rate_hz;
-}
-
-unsigned long get_pllb_clk_rate(void)
-{
- return gd->pllb_rate_hz;
-}
-
-u32 get_pllb_init(void)
-{
- return gd->at91_pllb_usb_init;
-}
-
-static unsigned long at91_css_to_rate(unsigned long css)
-{
- switch (css) {
- case AT91_PMC_MCKR_CSS_SLOW:
- return CONFIG_SYS_AT91_SLOW_CLOCK;
- case AT91_PMC_MCKR_CSS_MAIN:
- return gd->main_clk_rate_hz;
- case AT91_PMC_MCKR_CSS_PLLA:
- return gd->plla_rate_hz;
- case AT91_PMC_MCKR_CSS_PLLB:
- return gd->pllb_rate_hz;
- }
-
- return 0;
-}
-
-#ifdef CONFIG_USB_ATMEL
-static unsigned at91_pll_calc(unsigned main_freq, unsigned out_freq)
-{
- unsigned i, div = 0, mul = 0, diff = 1 << 30;
- unsigned ret = (out_freq > 155000000) ? 0xbe00 : 0x3e00;
-
- /* PLL output max 240 MHz (or 180 MHz per errata) */
- if (out_freq > 240000000)
- goto fail;
-
- for (i = 1; i < 256; i++) {
- int diff1;
- unsigned input, mul1;
-
- /*
- * PLL input between 1MHz and 32MHz per spec, but lower
- * frequences seem necessary in some cases so allow 100K.
- * Warning: some newer products need 2MHz min.
- */
- input = main_freq / i;
-#if defined(CONFIG_AT91SAM9G20)
- if (input < 2000000)
- continue;
-#endif
- if (input < 100000)
- continue;
- if (input > 32000000)
- continue;
-
- mul1 = out_freq / input;
-#if defined(CONFIG_AT91SAM9G20)
- if (mul > 63)
- continue;
-#endif
- if (mul1 > 2048)
- continue;
- if (mul1 < 2)
- goto fail;
-
- diff1 = out_freq - input * mul1;
- if (diff1 < 0)
- diff1 = -diff1;
- if (diff > diff1) {
- diff = diff1;
- div = i;
- mul = mul1;
- if (diff == 0)
- break;
- }
- }
- if (i == 256 && diff > (out_freq >> 5))
- goto fail;
- return ret | ((mul - 1) << 16) | div;
-fail:
- return 0;
-}
-#endif
-
-static u32 at91_pll_rate(u32 freq, u32 reg)
-{
- unsigned mul, div;
-
- div = reg & 0xff;
- mul = (reg >> 16) & 0x7ff;
- if (div && mul) {
- freq /= div;
- freq *= mul + 1;
- } else
- freq = 0;
-
- return freq;
-}
-
-int at91_clock_init(unsigned long main_clock)
-{
- unsigned freq, mckr;
- at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
-#ifndef CONFIG_SYS_AT91_MAIN_CLOCK
- unsigned tmp;
- /*
- * When the bootloader initialized the main oscillator correctly,
- * there's no problem using the cycle counter. But if it didn't,
- * or when using oscillator bypass mode, we must be told the speed
- * of the main clock.
- */
- if (!main_clock) {
- do {
- tmp = readl(&pmc->mcfr);
- } while (!(tmp & AT91_PMC_MCFR_MAINRDY));
- tmp &= AT91_PMC_MCFR_MAINF_MASK;
- main_clock = tmp * (CONFIG_SYS_AT91_SLOW_CLOCK / 16);
- }
-#endif
- gd->main_clk_rate_hz = main_clock;
-
- /* report if PLLA is more than mildly overclocked */
- gd->plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar));
-
-#ifdef CONFIG_USB_ATMEL
- /*
- * USB clock init: choose 48 MHz PLLB value,
- * disable 48MHz clock during usb peripheral suspend.
- *
- * REVISIT: assumes MCK doesn't derive from PLLB!
- */
- gd->at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) |
- AT91_PMC_PLLBR_USBDIV_2;
- gd->pllb_rate_hz = at91_pll_rate(main_clock, gd->at91_pllb_usb_init);
-#endif
-
- /*
- * MCK and CPU derive from one of those primary clocks.
- * For now, assume this parentage won't change.
- */
- mckr = readl(&pmc->mckr);
-#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
- /* plla divisor by 2 */
- gd->plla_rate_hz /= (1 << ((mckr & 1 << 12) >> 12));
-#endif
- gd->mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK);
- freq = gd->mck_rate_hz;
-
- freq /= (1 << ((mckr & AT91_PMC_MCKR_PRES_MASK) >> 2)); /* prescale */
-#if defined(CONFIG_AT91RM9200)
- /* mdiv */
- gd->mck_rate_hz = freq / (1 + ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8));
-#elif defined(CONFIG_AT91SAM9G20)
- /* mdiv ; (x >> 7) = ((x >> 8) * 2) */
- gd->mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) ?
- freq / ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 7) : freq;
- if (mckr & AT91_PMC_MCKR_MDIV_MASK)
- freq /= 2; /* processor clock division */
-#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
- gd->mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) ==
- (AT91_PMC_MCKR_MDIV_2 | AT91_PMC_MCKR_MDIV_4)
- ? freq / 3
- : freq / (1 << ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8));
-#else
- gd->mck_rate_hz = freq / (1 << ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8));
-#endif
- gd->cpu_clk_rate_hz = freq;
-
- return 0;
-}
diff --git a/arch/arm/lib/at91/Makefile b/arch/arm/lib/at91/Makefile
new file mode 100644
index 0000000..a264630
--- /dev/null
+++ b/arch/arm/lib/at91/Makefile
@@ -0,0 +1,45 @@
+#
+# (C) Copyright 2000-2008
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)libat91-common.o
+
+COBJS-y += clock.o
+
+SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/lib/at91/clock.c b/arch/arm/lib/at91/clock.c
new file mode 100644
index 0000000..608af2c
--- /dev/null
+++ b/arch/arm/lib/at91/clock.c
@@ -0,0 +1,215 @@
+/*
+ * [origin: Linux kernel linux/arch/arm/mach-at91/clock.c]
+ *
+ * Copyright (C) 2005 David Brownell
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/clk.h>
+
+#if !defined(CONFIG_AT91FAMILY)
+# error You need to define CONFIG_AT91FAMILY in your board config!
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+unsigned long get_cpu_clk_rate(void)
+{
+ return gd->cpu_clk_rate_hz;
+}
+
+unsigned long get_main_clk_rate(void)
+{
+ return gd->main_clk_rate_hz;
+}
+
+unsigned long get_mck_clk_rate(void)
+{
+ return gd->mck_rate_hz;
+}
+
+unsigned long get_plla_clk_rate(void)
+{
+ return gd->plla_rate_hz;
+}
+
+unsigned long get_pllb_clk_rate(void)
+{
+ return gd->pllb_rate_hz;
+}
+
+u32 get_pllb_init(void)
+{
+ return gd->at91_pllb_usb_init;
+}
+
+static unsigned long at91_css_to_rate(unsigned long css)
+{
+ switch (css) {
+ case AT91_PMC_MCKR_CSS_SLOW:
+ return CONFIG_SYS_AT91_SLOW_CLOCK;
+ case AT91_PMC_MCKR_CSS_MAIN:
+ return gd->main_clk_rate_hz;
+ case AT91_PMC_MCKR_CSS_PLLA:
+ return gd->plla_rate_hz;
+ case AT91_PMC_MCKR_CSS_PLLB:
+ return gd->pllb_rate_hz;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_USB_ATMEL
+static unsigned at91_pll_calc(unsigned main_freq, unsigned out_freq)
+{
+ unsigned i, div = 0, mul = 0, diff = 1 << 30;
+ unsigned ret = (out_freq > 155000000) ? 0xbe00 : 0x3e00;
+
+ /* PLL output max 240 MHz (or 180 MHz per errata) */
+ if (out_freq > 240000000)
+ goto fail;
+
+ for (i = 1; i < 256; i++) {
+ int diff1;
+ unsigned input, mul1;
+
+ /*
+ * PLL input between 1MHz and 32MHz per spec, but lower
+ * frequences seem necessary in some cases so allow 100K.
+ * Warning: some newer products need 2MHz min.
+ */
+ input = main_freq / i;
+#if defined(CONFIG_AT91SAM9G20)
+ if (input < 2000000)
+ continue;
+#endif
+ if (input < 100000)
+ continue;
+ if (input > 32000000)
+ continue;
+
+ mul1 = out_freq / input;
+#if defined(CONFIG_AT91SAM9G20)
+ if (mul > 63)
+ continue;
+#endif
+ if (mul1 > 2048)
+ continue;
+ if (mul1 < 2)
+ goto fail;
+
+ diff1 = out_freq - input * mul1;
+ if (diff1 < 0)
+ diff1 = -diff1;
+ if (diff > diff1) {
+ diff = diff1;
+ div = i;
+ mul = mul1;
+ if (diff == 0)
+ break;
+ }
+ }
+ if (i == 256 && diff > (out_freq >> 5))
+ goto fail;
+ return ret | ((mul - 1) << 16) | div;
+fail:
+ return 0;
+}
+#endif
+
+static u32 at91_pll_rate(u32 freq, u32 reg)
+{
+ unsigned mul, div;
+
+ div = reg & 0xff;
+ mul = (reg >> 16) & 0x7ff;
+ if (div && mul) {
+ freq /= div;
+ freq *= mul + 1;
+ } else
+ freq = 0;
+
+ return freq;
+}
+
+int at91_clock_init(unsigned long main_clock)
+{
+ unsigned freq, mckr;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
+#ifndef CONFIG_SYS_AT91_MAIN_CLOCK
+ unsigned tmp;
+ /*
+ * When the bootloader initialized the main oscillator correctly,
+ * there's no problem using the cycle counter. But if it didn't,
+ * or when using oscillator bypass mode, we must be told the speed
+ * of the main clock.
+ */
+ if (!main_clock) {
+ do {
+ tmp = readl(&pmc->mcfr);
+ } while (!(tmp & AT91_PMC_MCFR_MAINRDY));
+ tmp &= AT91_PMC_MCFR_MAINF_MASK;
+ main_clock = tmp * (CONFIG_SYS_AT91_SLOW_CLOCK / 16);
+ }
+#endif
+ gd->main_clk_rate_hz = main_clock;
+
+ /* report if PLLA is more than mildly overclocked */
+ gd->plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar));
+
+#ifdef CONFIG_USB_ATMEL
+ /*
+ * USB clock init: choose 48 MHz PLLB value,
+ * disable 48MHz clock during usb peripheral suspend.
+ *
+ * REVISIT: assumes MCK doesn't derive from PLLB!
+ */
+ gd->at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) |
+ AT91_PMC_PLLBR_USBDIV_2;
+ gd->pllb_rate_hz = at91_pll_rate(main_clock, gd->at91_pllb_usb_init);
+#endif
+
+ /*
+ * MCK and CPU derive from one of those primary clocks.
+ * For now, assume this parentage won't change.
+ */
+ mckr = readl(&pmc->mckr);
+#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+ /* plla divisor by 2 */
+ gd->plla_rate_hz /= (1 << ((mckr & 1 << 12) >> 12));
+#endif
+ gd->mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK);
+ freq = gd->mck_rate_hz;
+
+ freq /= (1 << ((mckr & AT91_PMC_MCKR_PRES_MASK) >> 2)); /* prescale */
+#if defined(CONFIG_AT91RM9200)
+ /* mdiv */
+ gd->mck_rate_hz = freq / (1 + ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8));
+#elif defined(CONFIG_AT91SAM9G20)
+ /* mdiv ; (x >> 7) = ((x >> 8) * 2) */
+ gd->mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) ?
+ freq / ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 7) : freq;
+ if (mckr & AT91_PMC_MCKR_MDIV_MASK)
+ freq /= 2; /* processor clock division */
+#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+ gd->mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) ==
+ (AT91_PMC_MCKR_MDIV_2 | AT91_PMC_MCKR_MDIV_4)
+ ? freq / 3
+ : freq / (1 << ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8));
+#else
+ gd->mck_rate_hz = freq / (1 << ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8));
+#endif
+ gd->cpu_clk_rate_hz = freq;
+
+ return 0;
+}
--
1.7.5.4
More information about the U-Boot
mailing list