[U-Boot] [PATCH 0/6] OMAP: fix build breaks on OMAP boards

[Aneesh V]

On Thursday 09 June 2011 01:50 AM, Albert ARIBAUD wrote:
> Hi Aneesh,
>
> Le 07/06/2011 17:13, Aneesh V a écrit :
>> Fix build breaks for OMAP boards.
>> All the build breaks were due to couple of missing
>> defines in the config file, namely:
>>
>> CONFIG_SYS_SDRAM_BASE and CONFIG_SYS_INIT_SP_ADDR
>>
>> They have been fixed by providing the right SDRAM
>> base address and by using SRAM base as the initial
>> stack address.
>>
>> None of these have been tested as I do not have any of
>> these boards.
>>
>> Aneesh V (6):
>> omap1610h2: fix build breaks
>> omap5912osk: fix build breaks
>> omap1510inn: fix build breaks
>> omap1610inn: fix build breaks
>> omap2420h4: fix build breaks
>> omap730p2: fix build breaks
>>
>> include/configs/omap1510inn.h | 3 +++
>> include/configs/omap1610h2.h | 3 +++
>> include/configs/omap1610inn.h | 3 +++
>> include/configs/omap2420h4.h | 3 +++
>> include/configs/omap5912osk.h | 3 +++
>> include/configs/omap730p2.h | 3 +++
>> 6 files changed, 18 insertions(+), 0 deletions(-)
>
> Could you post a V2 series with a symbolic constant rather than a magic
> number for SP? Something like:
>
> ...
> #define PHYS_SRAM 0x20000000
> ...
> #define CONFIG_SYS_INIT_SP_ADDR PHYS_SRAM
>
> ... so that readers of the code know exactly that SP is set to SRAM base.
>

Will do.

Thanks,
Aneesh