[U-Boot] [PATCH] AT91: Makes AT91SAM9RL-EK build correctly against the mainline HEAD
Hong Xu
hong.xu at atmel.com
Fri Jun 10 07:22:24 CEST 2011
Rework for AT91SAM9RL-EK, makes it build again.
Based on the work for AT91SAM9260-EK.
Signed-off-by: Hong Xu <hong.xu at atmel.com>
---
Makefile | 12 --
arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c | 26 ++--
arch/arm/include/asm/arch-at91/at91_spi.h | 2 +-
arch/arm/include/asm/arch-at91/at91sam9rl.h | 176 ++++++++++----------
arch/arm/include/asm/arch-at91/at91sam9rl_matrix.h | 121 +++++---------
board/atmel/at91sam9rlek/at91sam9rlek.c | 71 +++++---
board/atmel/at91sam9rlek/config.mk | 1 -
board/atmel/at91sam9rlek/led.c | 6 +-
boards.cfg | 3 +
include/configs/at91sam9rlek.h | 77 +++++----
10 files changed, 236 insertions(+), 259 deletions(-)
delete mode 100644 board/atmel/at91sam9rlek/config.mk
diff --git a/Makefile b/Makefile
index dcf5d93..9cd812c 100644
--- a/Makefile
+++ b/Makefile
@@ -845,18 +845,6 @@ at91sam9263ek_config : unconfig
fi;
@$(MKCONFIG) -n $@ -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91
-at91sam9rlek_nandflash_config \
-at91sam9rlek_dataflash_config \
-at91sam9rlek_dataflash_cs0_config \
-at91sam9rlek_config : unconfig
- @mkdir -p $(obj)include
- @if [ "$(findstring _nandflash,$@)" ] ; then \
- echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
- else \
- echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \
- fi;
- @$(MKCONFIG) -n $@ -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
-
CPU9G20_128M_config \
CPU9G20_config \
CPU9260_128M_config \
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c
index 4f570f4..c8d19f8 100644
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c
@@ -23,45 +23,45 @@
*/
#include <common.h>
+#include <asm/io.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
void at91_serial0_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTA, 6, 1); /* TXD0 */
at91_set_a_periph(AT91_PIO_PORTA, 7, 0); /* RXD0 */
- writel(1 << AT91SAM9RL_ID_US0, &pmc->pcer);
+ writel(1 << ATMEL_ID_US0, &pmc->pcer);
}
void at91_serial1_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTA, 11, 1); /* TXD1 */
at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* RXD1 */
- writel(1 << AT91SAM9RL_ID_US1, &pmc->pcer);
+ writel(1 << ATMEL_ID_US1, &pmc->pcer);
}
void at91_serial2_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTA, 13, 1); /* TXD2 */
at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* RXD2 */
- writel(1 << AT91SAM9RL_ID_US2, &pmc->pcer);
+ writel(1 << ATMEL_ID_US2, &pmc->pcer);
}
-void at91_serial3_hw_init(void)
+void at91_seriald_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTA, 21, 0); /* DRXD */
at91_set_a_periph(AT91_PIO_PORTA, 22, 1); /* DTXD */
- writel(1 << AT91_ID_SYS, &pmc->pcer);
+ writel(1 << ATMEL_ID_SYS, &pmc->pcer);
}
void at91_serial_hw_init(void)
@@ -79,21 +79,21 @@ void at91_serial_hw_init(void)
#endif
#ifdef CONFIG_USART3 /* DBGU */
- at91_serial3_hw_init();
+ at91_seriald_hw_init();
#endif
}
#ifdef CONFIG_HAS_DATAFLASH
void at91_spi0_hw_init(unsigned long cs_mask)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTA, 25, 0); /* SPI0_MISO */
at91_set_a_periph(AT91_PIO_PORTA, 26, 0); /* SPI0_MOSI */
at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* SPI0_SPCK */
/* Enable clock */
- writel(1 << AT91SAM9RL_ID_SPI, &pmc->pcer);
+ writel(1 << ATMEL_ID_SPI, &pmc->pcer);
if (cs_mask & (1 << 0)) {
at91_set_a_periph(AT91_PIO_PORTA, 28, 1);
diff --git a/arch/arm/include/asm/arch-at91/at91_spi.h b/arch/arm/include/asm/arch-at91/at91_spi.h
index c520e89..afe724d 100644
--- a/arch/arm/include/asm/arch-at91/at91_spi.h
+++ b/arch/arm/include/asm/arch-at91/at91_spi.h
@@ -33,7 +33,7 @@ typedef struct at91_spi {
at91_pdc_t pdc;
} at91_spi_t;
-#ifdef CONFIG_AT91_LEGACY
+#ifdef CONFIG_ATMEL_LEGACY
#define AT91_SPI_CR 0x00 /* Control Register */
#define AT91_SPI_SPIEN (1 << 0) /* SPI Enable */
diff --git a/arch/arm/include/asm/arch-at91/at91sam9rl.h b/arch/arm/include/asm/arch-at91/at91sam9rl.h
index 8eb0d4f..7e3a029 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9rl.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9rl.h
@@ -14,117 +14,109 @@
#ifndef AT91SAM9RL_H
#define AT91SAM9RL_H
+#define CONFIG_ARM926EJS /* ARM926EJS Core */
+#define CONFIG_AT91FAMILY /* it's a member of AT91 */
/*
* Peripheral identifiers/interrupts.
*/
-#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS 1 /* System Controller */
-#define AT91SAM9RL_ID_PIOA 2 /* Parallel IO Controller A */
-#define AT91SAM9RL_ID_PIOB 3 /* Parallel IO Controller B */
-#define AT91SAM9RL_ID_PIOC 4 /* Parallel IO Controller C */
-#define AT91SAM9RL_ID_PIOD 5 /* Parallel IO Controller D */
-#define AT91SAM9RL_ID_US0 6 /* USART 0 */
-#define AT91SAM9RL_ID_US1 7 /* USART 1 */
-#define AT91SAM9RL_ID_US2 8 /* USART 2 */
-#define AT91SAM9RL_ID_US3 9 /* USART 3 */
-#define AT91SAM9RL_ID_MCI 10 /* Multimedia Card Interface */
-#define AT91SAM9RL_ID_TWI0 11 /* TWI 0 */
-#define AT91SAM9RL_ID_TWI1 12 /* TWI 1 */
-#define AT91SAM9RL_ID_SPI 13 /* Serial Peripheral Interface */
-#define AT91SAM9RL_ID_SSC0 14 /* Serial Synchronous Controller 0 */
-#define AT91SAM9RL_ID_SSC1 15 /* Serial Synchronous Controller 1 */
-#define AT91SAM9RL_ID_TC0 16 /* Timer Counter 0 */
-#define AT91SAM9RL_ID_TC1 17 /* Timer Counter 1 */
-#define AT91SAM9RL_ID_TC2 18 /* Timer Counter 2 */
-#define AT91SAM9RL_ID_PWMC 19 /* Pulse Width Modulation Controller */
-#define AT91SAM9RL_ID_TSC 20 /* Touch Screen Controller */
-#define AT91SAM9RL_ID_DMA 21 /* DMA Controller */
-#define AT91SAM9RL_ID_UDPHS 22 /* USB Device HS */
-#define AT91SAM9RL_ID_LCDC 23 /* LCD Controller */
-#define AT91SAM9RL_ID_AC97C 24 /* AC97 Controller */
-#define AT91SAM9RL_ID_IRQ0 31 /* Advanced Interrupt Controller (IRQ0) */
-
-#define AT91_SDRAMC_BASE 0xffffea00
-#define AT91_SMC_BASE 0xffffec00
-#define AT91_MATRIX_BASE 0xffffee00
-#define AT91_PIO_BASE 0xfffff400
-#define AT91_PMC_BASE 0xfffffc00
-#define AT91_RSTC_BASE 0xfffffd00
-#define AT91_PIT_BASE 0xfffffd30
-#define AT91_WDT_BASE 0xfffffd40
-
-#ifdef CONFIG_AT91_LEGACY
+#define ATMEL_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define ATMEL_ID_SYS 1 /* System Controller */
+#define ATMEL_ID_PIOA 2 /* Parallel IO Controller A */
+#define ATMEL_ID_PIOB 3 /* Parallel IO Controller B */
+#define ATMEL_ID_PIOC 4 /* Parallel IO Controller C */
+#define ATMEL_ID_PIOD 5 /* Parallel IO Controller D */
+#define ATMEL_ID_US0 6 /* USART 0 */
+#define ATMEL_ID_US1 7 /* USART 1 */
+#define ATMEL_ID_US2 8 /* USART 2 */
+#define ATMEL_ID_US3 9 /* USART 3 */
+#define ATMEL_ID_MCI 10 /* Multimedia Card Interface */
+#define ATMEL_ID_TWI0 11 /* TWI 0 */
+#define ATMEL_ID_TWI1 12 /* TWI 1 */
+#define ATMEL_ID_SPI 13 /* Serial Peripheral Interface */
+#define ATMEL_ID_SSC0 14 /* Serial Synchronous Controller 0 */
+#define ATMEL_ID_SSC1 15 /* Serial Synchronous Controller 1 */
+#define ATMEL_ID_TC0 16 /* Timer Counter 0 */
+#define ATMEL_ID_TC1 17 /* Timer Counter 1 */
+#define ATMEL_ID_TC2 18 /* Timer Counter 2 */
+#define ATMEL_ID_PWMC 19 /* Pulse Width Modulation Controller */
+#define ATMEL_ID_TSC 20 /* Touch Screen Controller */
+#define ATMEL_ID_DMA 21 /* DMA Controller */
+#define ATMEL_ID_UDPHS 22 /* USB Device HS */
+#define ATMEL_ID_LCDC 23 /* LCD Controller */
+#define ATMEL_ID_AC97C 24 /* AC97 Controller */
+#define ATMEL_ID_IRQ0 31 /* Advanced Interrupt Controller (IRQ0) */
/*
* User Peripheral physical base addresses.
*/
-#define AT91SAM9RL_BASE_TCB0 0xfffa0000
-#define AT91SAM9RL_BASE_TC0 0xfffa0000
-#define AT91SAM9RL_BASE_TC1 0xfffa0040
-#define AT91SAM9RL_BASE_TC2 0xfffa0080
-#define AT91SAM9RL_BASE_MCI 0xfffa4000
-#define AT91SAM9RL_BASE_TWI0 0xfffa8000
-#define AT91SAM9RL_BASE_TWI1 0xfffac000
-#define AT91SAM9RL_BASE_US0 0xfffb0000
-#define AT91SAM9RL_BASE_US1 0xfffb4000
-#define AT91SAM9RL_BASE_US2 0xfffb8000
-#define AT91SAM9RL_BASE_US3 0xfffbc000
-#define AT91SAM9RL_BASE_SSC0 0xfffc0000
-#define AT91SAM9RL_BASE_SSC1 0xfffc4000
-#define AT91SAM9RL_BASE_PWMC 0xfffc8000
-#define AT91SAM9RL_BASE_SPI 0xfffcc000
-#define AT91SAM9RL_BASE_TSC 0xfffd0000
-#define AT91SAM9RL_BASE_UDPHS 0xfffd4000
-#define AT91SAM9RL_BASE_AC97C 0xfffd8000
-#define AT91_BASE_SYS 0xffffc000
+#define ATMEL_BASE_TCB0 0xfffa0000
+#define ATMEL_BASE_TC0 0xfffa0000
+#define ATMEL_BASE_TC1 0xfffa0040
+#define ATMEL_BASE_TC2 0xfffa0080
+#define ATMEL_BASE_MCI 0xfffa4000
+#define ATMEL_BASE_TWI0 0xfffa8000
+#define ATMEL_BASE_TWI1 0xfffac000
+#define ATMEL_BASE_US0 0xfffb0000
+#define ATMEL_BASE_US1 0xfffb4000
+#define ATMEL_BASE_US2 0xfffb8000
+#define ATMEL_BASE_US3 0xfffbc000
+#define ATMEL_BASE_SSC0 0xfffc0000
+#define ATMEL_BASE_SSC1 0xfffc4000
+#define ATMEL_BASE_PWMC 0xfffc8000
+#define ATMEL_BASE_SPI 0xfffcc000
+#define ATMEL_BASE_SPI0 0xfffcc000
+#define ATMEL_BASE_TSC 0xfffd0000
+#define ATMEL_BASE_UDPHS 0xfffd4000
+#define ATMEL_BASE_AC97C 0xfffd8000
+#define ATMEL_BASE_SYS 0xffffc000
/*
- * System Peripherals (offset from AT91_BASE_SYS)
+ * System Peripherals
*/
-#define AT91_DMA (0xffffe600 - AT91_BASE_SYS)
-#define AT91_ECC (0xffffe800 - AT91_BASE_SYS)
-#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS)
-#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
-#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
-#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS)
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
-#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
-#define AT91_PIOD (0xfffffa00 - AT91_BASE_SYS)
-#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
-#define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS)
-#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
-#define AT91_RTC (0xfffffe00 - AT91_BASE_SYS)
-
-#define AT91_USART0 AT91SAM9RL_BASE_US0
-#define AT91_USART1 AT91SAM9RL_BASE_US1
-#define AT91_USART2 AT91SAM9RL_BASE_US2
-#define AT91_USART3 AT91SAM9RL_BASE_US3
-
-#endif /* CONFIG_AT91_LEGACY */
+#define ATMEL_BASE_DMA 0xffffe600
+#define ATMEL_BASE_ECC 0xffffe800
+#define ATMEL_BASE_SDRAMC 0xffffea00
+#define ATMEL_BASE_SMC 0xffffec00
+#define ATMEL_BASE_MATRIX 0xffffee00
+#define ATMEL_BASE_CCFG 0xffffef10
+#define ATMEL_BASE_AIC 0xfffff000
+#define ATMEL_BASE_DBGU 0xfffff200
+#define ATMEL_BASE_PIOA 0xfffff400
+#define ATMEL_BASE_PIOB 0xfffff600
+#define ATMEL_BASE_PIOC 0xfffff800
+#define ATMEL_BASE_PIOD 0xfffffa00
+#define ATMEL_BASE_PMC 0xfffffc00
+#define ATMEL_BASE_RSTC 0xfffffd00
+#define ATMEL_BASE_SHDWC 0xfffffd10
+#define ATMEL_BASE_RTT 0xfffffd20
+#define ATMEL_BASE_PIT 0xfffffd30
+#define ATMEL_BASE_WDT 0xfffffd40
+#define ATMEL_BASE_SCKCR 0xfffffd50
+#define ATMEL_BASE_GPBR 0xfffffd60
+#define ATMEL_BASE_RTC 0xfffffe00
/*
* Internal Memory.
*/
-#define AT91SAM9RL_SRAM_BASE 0x00300000 /* Internal SRAM base address */
-#define AT91SAM9RL_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */
+#define ATMEL_BASE_SRAM 0x00300000 /* Internal SRAM base address */
+#define ATMEL_SRAM_SIZE SZ_64K /* Internal SRAM size (64Kb) */
-#define AT91SAM9RL_ROM_BASE 0x00400000 /* Internal ROM base address */
-#define AT91SAM9RL_ROM_SIZE (2 * SZ_16K) /* Internal ROM size (32Kb) */
+#define ATMEL_BASE_ROM 0x00400000 /* Internal ROM base address */
+#define ATMEL_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
-#define AT91SAM9RL_LCDC_BASE 0x00500000 /* LCD Controller */
-#define AT91SAM9RL_UDPHS_BASE 0x00600000 /* USB Device HS controller */
+#define ATMEL_BASE_LCDC 0x00500000 /* LCD Controller */
+#define ATMEL_UHP_BASE 0x00600000 /* USB Device HS controller */
+
+/*
+ * External memory
+ */
+#define ATMEL_BASE_CS1 0x20000000 /* SDRAM */
+#define ATMEL_BASE_CS3 0x40000000 /* typically NAND */
+#define ATMEL_PIO_PORTS 4
/*
* Cpu Name
*/
-#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9RL"
+#define ATMEL_CPU_NAME "AT91SAM9RL"
#endif
diff --git a/arch/arm/include/asm/arch-at91/at91sam9rl_matrix.h b/arch/arm/include/asm/arch-at91/at91sam9rl_matrix.h
index af8d914..295f768 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9rl_matrix.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9rl_matrix.h
@@ -14,83 +14,48 @@
#ifndef AT91SAM9RL_MATRIX_H
#define AT91SAM9RL_MATRIX_H
-#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
-#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
-#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
-#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
-#define AT91_MATRIX_ULBT_FOUR (2 << 0)
-#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
-#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
-
-#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
-#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
-#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
-#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
-#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
-#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
-#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
-
-#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
-#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
-#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
-#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
-#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
-#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
-#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
-
-#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
-#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define AT91_MATRIX_RCB2 (1 << 2)
-#define AT91_MATRIX_RCB3 (1 << 3)
-#define AT91_MATRIX_RCB4 (1 << 4)
-#define AT91_MATRIX_RCB5 (1 << 5)
-
-#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */
-#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
-#define AT91_MATRIX_ITCM_0 (0 << 0)
-#define AT91_MATRIX_ITCM_16 (5 << 0)
-#define AT91_MATRIX_ITCM_32 (6 << 0)
-#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
-#define AT91_MATRIX_DTCM_0 (0 << 4)
-#define AT91_MATRIX_DTCM_16 (5 << 4)
-#define AT91_MATRIX_DTCM_32 (6 << 4)
-
-#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */
-#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_MATRIX_CS1A_SMC (0 << 1)
-#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
-#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
-#define AT91_MATRIX_CS3A_SMC (0 << 3)
-#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
-#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
-#define AT91_MATRIX_CS4A_SMC (0 << 4)
-#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
-#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
-#define AT91_MATRIX_CS5A_SMC (0 << 5)
-#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
-#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */
-#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16)
-#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
-
+#ifndef __ASSEMBLY__
+
+struct at91_matrix {
+ u32 mcfg[16]; /* Master Configuration Registers */
+ u32 scfg[16]; /* Slave Configuration Registers */
+ u32 pras[16][2]; /* Priority Assignment Slave Registers */
+ u32 mrcr; /* Master Remap Control Register */
+ u32 filler[7];
+ u32 ebicsa; /* EBI Chip Select Assignment Register */
+};
+
+#endif /* __ASSEMBLY__ */
+
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
+
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR_SHIFT 18
+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
+
+#define AT91_MATRIX_M0PR_SHIFT 0
+#define AT91_MATRIX_M1PR_SHIFT 4
+#define AT91_MATRIX_M2PR_SHIFT 8
+#define AT91_MATRIX_M3PR_SHIFT 12
+#define AT91_MATRIX_M4PR_SHIFT 16
+#define AT91_MATRIX_M5PR_SHIFT 20
+
+#define AT91_MATRIX_RCB0 (1 << 0)
+#define AT91_MATRIX_RCB1 (1 << 1)
+
+#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
+#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
+#define AT91_MATRIX_DBPUC (1 << 8)
+#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
#endif
diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c
index e374917..ad289a4 100644
--- a/board/atmel/at91sam9rlek/at91sam9rlek.c
+++ b/board/atmel/at91sam9rlek/at91sam9rlek.c
@@ -23,6 +23,7 @@
*/
#include <common.h>
+#include <asm/io.h>
#include <asm/arch/at91sam9rl.h>
#include <asm/arch/at91sam9rl_matrix.h>
#include <asm/arch/at91sam9_smc.h>
@@ -31,7 +32,7 @@
#include <asm/arch/at91_rstc.h>
#include <asm/arch/clk.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
+
#include <lcd.h>
#include <atmel_lcdc.h>
#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
@@ -48,33 +49,37 @@ DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_CMD_NAND
static void at91sam9rlek_nand_hw_init(void)
{
+ struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+ struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
unsigned long csa;
/* Enable CS3 */
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA,
- csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+ csa = readl(&matrix->ebicsa);
+ csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA;
+
+ writel(csa, &matrix->ebicsa);
/* Configure SMC CS3 for NAND/SmartMedia */
- at91_sys_write(AT91_SMC_SETUP(3),
- AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
- AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(3),
- AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
- AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
- at91_sys_write(AT91_SMC_CYCLE(3),
- AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
- at91_sys_write(AT91_SMC_MODE(3),
- AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_EXNWMODE_DISABLE |
+ writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
+ AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
+ &smc->cs[3].setup);
+ writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
+ AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
+ &smc->cs[3].pulse);
+ writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
+ &smc->cs[3].cycle);
+ writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+ AT91_SMC_MODE_EXNW_DISABLE |
#ifdef CONFIG_SYS_NAND_DBW_16
- AT91_SMC_DBW_16 |
+ AT91_SMC_MODE_DBW_16 |
#else /* CONFIG_SYS_NAND_DBW_8 */
- AT91_SMC_DBW_8 |
+ AT91_SMC_MODE_DBW_8 |
#endif
- AT91_SMC_TDF_(2));
+ AT91_SMC_MODE_TDF_CYCLE(2),
+ &smc->cs[3].mode);
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_PIOD);
+ writel(1 << ATMEL_ID_PIOD, &pmc->pcer);
/* Configure RDY/BSY */
at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
@@ -102,7 +107,7 @@ vidinfo_t panel_info = {
vl_vsync_len: 1,
vl_upper_margin:1,
vl_lower_margin:0,
- mmio: AT91SAM9RL_LCDC_BASE,
+ mmio: ATMEL_BASE_LCDC,
};
void lcd_enable(void)
@@ -116,6 +121,8 @@ void lcd_disable(void)
}
static void at91sam9rlek_lcd_hw_init(void)
{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
at91_set_B_periph(AT91_PIN_PC1, 0); /* LCDPWR */
at91_set_A_periph(AT91_PIN_PC5, 0); /* LCDHSYNC */
at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDDOTCK */
@@ -138,9 +145,7 @@ static void at91sam9rlek_lcd_hw_init(void)
at91_set_B_periph(AT91_PIN_PC24, 0); /* LCDD22 */
at91_set_B_periph(AT91_PIN_PC25, 0); /* LCDD23 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_LCDC);
-
- gd->fb_base = 0;
+ writel(1 << ATMEL_ID_LCDC, &pmc->pcer);
}
#ifdef CONFIG_LCD_INFO
@@ -157,7 +162,7 @@ void lcd_show_board_info(void)
lcd_printf ("(C) 2008 ATMEL Corp\n");
lcd_printf ("at91support at atmel.com\n");
lcd_printf ("%s CPU at %s MHz\n",
- CONFIG_SYS_AT91_CPU_NAME,
+ ATMEL_CPU_NAME,
strmhz(temp, get_cpu_clk_rate()));
dram_size = 0;
@@ -173,6 +178,17 @@ void lcd_show_board_info(void)
#endif /* CONFIG_LCD_INFO */
#endif
+int board_early_init_f(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ /* Enable clocks for all PIOs */
+ writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) |
+ (1 << ATMEL_ID_PIOC) | (1 << ATMEL_ID_PIOD),
+ &pmc->pcer);
+
+ return 0;
+}
int board_init(void)
{
@@ -182,7 +198,7 @@ int board_init(void)
/* arch number of AT91SAM9RLEK-Board */
gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9RLEK;
/* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
at91_serial_hw_init();
#ifdef CONFIG_CMD_NAND
@@ -199,7 +215,8 @@ int board_init(void)
int dram_init(void)
{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+ gd->ram_size = get_ram_size(
+ (void *)CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_SDRAM_SIZE);
return 0;
}
diff --git a/board/atmel/at91sam9rlek/config.mk b/board/atmel/at91sam9rlek/config.mk
deleted file mode 100644
index e554a45..0000000
--- a/board/atmel/at91sam9rlek/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x23f00000
diff --git a/board/atmel/at91sam9rlek/led.c b/board/atmel/at91sam9rlek/led.c
index 9634cc0..987e8c0 100644
--- a/board/atmel/at91sam9rlek/led.c
+++ b/board/atmel/at91sam9rlek/led.c
@@ -26,12 +26,14 @@
#include <asm/arch/at91sam9rl.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
+#include <asm/io.h>
void coloured_LED_init(void)
{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
/* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_PIOD);
+ writel(ATMEL_ID_PIOD, &pmc->pcer);
at91_set_gpio_output(CONFIG_RED_LED, 1);
at91_set_gpio_output(CONFIG_GREEN_LED, 1);
diff --git a/boards.cfg b/boards.cfg
index d2cacc8..77797f7 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -74,6 +74,9 @@ omap1510inn arm arm925t - ti
aspenite arm arm926ejs - Marvell armada100
afeb9260 arm arm926ejs - - at91
at91cap9adk arm arm926ejs - atmel at91
+at91sam9rlek_nandflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_NANDFLASH
+at91sam9rlek_dataflash_cs0 arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_DATAFLASH
+at91sam9rlek_dataflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_DATAFLASH
snapper9260 arm arm926ejs - bluewater at91 snapper9260:AT91SAM9260
snapper9g20 arm arm926ejs snapper9260 bluewater at91 snapper9260:AT91SAM9G20
cpu9260 arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260
diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
index 8dbd082..9e1409c 100644
--- a/include/configs/at91sam9rlek.h
+++ b/include/configs/at91sam9rlek.h
@@ -27,33 +27,42 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_AT91_LEGACY
+#include <asm/hardware.h>
+
+#define CONFIG_SYS_TEXT_BASE 0x21F00000
/* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
-#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
+#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* main clock xtal */
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_AT91SAM9RLEK 1 /* It's an AT91SAM9RLEK Board */
-#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
-#define CONFIG_AT91SAM9RL 1 /* It's an Atmel AT91SAM9RL SoC*/
-#define CONFIG_AT91SAM9RLEK 1 /* on an AT91SAM9RLEK Board */
#define CONFIG_ARCH_CPU_INIT
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
-#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_ATMEL_LEGACY
+#define CONFIG_AT91_GPIO 1
+#define CONFIG_AT91_GPIO_PULLUP 1
/*
* Hardware drivers
*/
-#define CONFIG_AT91_GPIO 1
-#define CONFIG_ATMEL_USART 1
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-#undef CONFIG_USART2
-#define CONFIG_USART3 1 /* USART 3 is DBGU */
+
+/* serial console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE ATMEL_BASE_DBGU
+#define CONFIG_USART_ID ATMEL_ID_SYS
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {115200, 19200, 38400, 57600, 9600}
/* LCD */
#define CONFIG_LCD 1
@@ -62,10 +71,13 @@
#undef LCD_TEST_PATTERN
#define CONFIG_LCD_INFO 1
#define CONFIG_LCD_INFO_BELOW_LOGO 1
-#define CONFIG_SYS_WHITE_ON_BLACK 1
+#define CONFIG_SYS_WHITE_ON_BLACK 1
#define CONFIG_ATMEL_LCD 1
#define CONFIG_ATMEL_LCD_RGB565 1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+/* Let board_init_f handle the framebuffer allocation */
+#undef CONFIG_FB_ADDR
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+
/* LED */
#define CONFIG_AT91_LED
@@ -85,15 +97,19 @@
#undef CONFIG_CMD_IMLS
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
#undef CONFIG_CMD_SOURCE
#undef CONFIG_CMD_USB
-#define CONFIG_CMD_NAND 1
+#define CONFIG_CMD_NAND 1
/* SDRAM */
#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
+#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
+#define CONFIG_SYS_SDRAM_SIZE 0x04000000
+
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE)
/* DataFlash */
#define CONFIG_ATMEL_DATAFLASH_SPI
@@ -112,7 +128,7 @@
#ifdef CONFIG_CMD_NAND
#define CONFIG_NAND_ATMEL
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE 0x40000000
+#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
#define CONFIG_SYS_NAND_DBW_8 1
/* our ALE is AD21 */
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
@@ -129,7 +145,7 @@
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END 0x23e00000
#ifdef CONFIG_SYS_USE_DATAFLASH
@@ -149,7 +165,7 @@
#else /* CONFIG_SYS_USE_NANDFLASH */
/* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_IS_IN_NAND 1
+#define CONFIG_ENV_IS_IN_NAND 1
#define CONFIG_ENV_OFFSET 0x60000
#define CONFIG_ENV_OFFSET_REDUND 0x80000
#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
@@ -161,25 +177,20 @@
#endif
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
-
#define CONFIG_SYS_PROMPT "U-Boot> "
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_LONGHELP 1
-#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_CMDLINE_EDITING 1
/*
* Size of malloc() pool
*/
-#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
+#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
#define CONFIG_STACKSIZE (32*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
+#undef CONFIG_USE_IRQ
#endif
--
1.7.3.3
More information about the U-Boot
mailing list