[U-Boot] [PATCH v2 1/5] arm/km: remove unneeded define

[Prafulla Wadaskar]

> -----Original Message-----
> From: Holger Brunck [mailto:holger.brunck at keymile.com]
> Sent: Wednesday, June 08, 2011 5:13 PM
> To: u-boot at lists.denx.de
> Cc: Holger Brunck; Valentin Longchamp; Prafulla Wadaskar; Heiko Schocher
> Subject: [PATCH v2 1/5] arm/km: remove unneeded define
> 
> CONFIG_ENV_SIZE for NAND was later in this file overwritten
> because we have the environment in i2c eeprom, so remove
> this define.
> 
> Signed-off-by: Holger Brunck <holger.brunck at keymile.com>
> Signed-off-by: Valentin Longchamp <valentin.longchamp at keymile.com>
> cc: Prafulla Wadaskar <prafulla at marvell.com>
> cc: Heiko Schocher <hs at denx.de>
> ---
> Changes for v2:
>     - nothing
> 
>  include/configs/km/km_arm.h |    2 --
>  1 files changed, 0 insertions(+), 2 deletions(-)
> 
> diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h
> index 20ee6ea..5b0f1d8 100644
> --- a/include/configs/km/km_arm.h
> +++ b/include/configs/km/km_arm.h
> @@ -50,7 +50,6 @@
>  #include "keymile-common.h"
> 
>  #define CONFIG_SYS_TEXT_BASE	0x04000000	/* code address after reloc
> */
> -#define CONFIG_ENV_SIZE		(128 << 10)	/* NAND chip block size	*/
>  #define CONFIG_SYS_MEMTEST_START 0x00400000	/* 4M */
>  #define CONFIG_SYS_MEMTEST_END	0x007fffff	/*(_8M -1) */
>  #define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
> @@ -215,7 +214,6 @@ int get_scl(void);
>  #define CONFIG_ENV_EEPROM_IS_ON_I2C
>  #define CONFIG_SYS_EEPROM_WREN
>  #define CONFIG_ENV_OFFSET		0x0 /* no bracets! */
> -#undef	CONFIG_ENV_SIZE
>  #define CONFIG_ENV_SIZE			(0x2000 - CONFIG_ENV_OFFSET)
>  #define CONFIG_I2C_ENV_EEPROM_BUS	"pca9547:70:d\0"
> 
> --

Applied to u-boot-marvell.git next branch
Regards..
Prafulla . .

> 1.7.1