[U-Boot] [PATCH 1/8] mmc: copy s5p to sdhci
Rob Herring
robherring2 at gmail.com
Sat Jun 11 23:46:45 CEST 2011
From: Rob Herring <rob.herring at calxeda.com>
The s5p mmc controller is a standard SDHCI controller with a few extra
registers. So rename it to reflect that and so other platforms can use it.
Signed-off-by: Rob Herring <rob.herring at calxeda.com>
---
drivers/mmc/Makefile | 3 +-
drivers/mmc/s5p_mmc.c | 482 -------------------------------------------------
drivers/mmc/sdhci.c | 482 +++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 484 insertions(+), 483 deletions(-)
delete mode 100644 drivers/mmc/s5p_mmc.c
create mode 100644 drivers/mmc/sdhci.c
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index a8fe17a..a9f6921 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -37,7 +37,8 @@ COBJS-$(CONFIG_MXC_MMC) += mxcmmc.o
COBJS-$(CONFIG_OMAP3_MMC) += omap3_mmc.o
COBJS-$(CONFIG_OMAP_HSMMC) += omap_hsmmc.o
COBJS-$(CONFIG_PXA_MMC) += pxa_mmc.o
-COBJS-$(CONFIG_S5P_MMC) += s5p_mmc.o
+COBJS-$(CONFIG_S5P_MMC) += sdhci.o
+COBJS-$(CONFIG_SDHCI) += sdhci.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/mmc/s5p_mmc.c b/drivers/mmc/s5p_mmc.c
deleted file mode 100644
index 280738f..0000000
--- a/drivers/mmc/s5p_mmc.c
+++ /dev/null
@@ -1,482 +0,0 @@
-/*
- * (C) Copyright 2009 SAMSUNG Electronics
- * Minkyu Kang <mk7.kang at samsung.com>
- * Jaehoon Chung <jh80.chung at samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mmc.h>
-#include <asm/io.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/clk.h>
-
-/* support 4 mmc hosts */
-struct mmc mmc_dev[4];
-struct mmc_host mmc_host[4];
-
-static inline struct s5p_mmc *s5p_get_base_mmc(int dev_index)
-{
- unsigned long offset = dev_index * sizeof(struct s5p_mmc);
- return (struct s5p_mmc *)(samsung_get_base_mmc() + offset);
-}
-
-static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data)
-{
- unsigned char ctrl;
-
- debug("data->dest: %08x\n", (u32)data->dest);
- writel((u32)data->dest, &host->reg->sysad);
- /*
- * DMASEL[4:3]
- * 00 = Selects SDMA
- * 01 = Reserved
- * 10 = Selects 32-bit Address ADMA2
- * 11 = Selects 64-bit Address ADMA2
- */
- ctrl = readb(&host->reg->hostctl);
- ctrl &= ~(3 << 3);
- writeb(ctrl, &host->reg->hostctl);
-
- /* We do not handle DMA boundaries, so set it to max (512 KiB) */
- writew((7 << 12) | (data->blocksize & 0xFFF), &host->reg->blksize);
- writew(data->blocks, &host->reg->blkcnt);
-}
-
-static void mmc_set_transfer_mode(struct mmc_host *host, struct mmc_data *data)
-{
- unsigned short mode;
-
- /*
- * TRNMOD
- * MUL1SIN0[5] : Multi/Single Block Select
- * RD1WT0[4] : Data Transfer Direction Select
- * 1 = read
- * 0 = write
- * ENACMD12[2] : Auto CMD12 Enable
- * ENBLKCNT[1] : Block Count Enable
- * ENDMA[0] : DMA Enable
- */
- mode = (1 << 1) | (1 << 0);
- if (data->blocks > 1)
- mode |= (1 << 5);
- if (data->flags & MMC_DATA_READ)
- mode |= (1 << 4);
-
- writew(mode, &host->reg->trnmod);
-}
-
-static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
- struct mmc_data *data)
-{
- struct mmc_host *host = (struct mmc_host *)mmc->priv;
- int flags, i;
- unsigned int timeout;
- unsigned int mask;
- unsigned int retry = 0x100000;
-
- /* Wait max 10 ms */
- timeout = 10;
-
- /*
- * PRNSTS
- * CMDINHDAT[1] : Command Inhibit (DAT)
- * CMDINHCMD[0] : Command Inhibit (CMD)
- */
- mask = (1 << 0);
- if ((data != NULL) || (cmd->resp_type & MMC_RSP_BUSY))
- mask |= (1 << 1);
-
- /*
- * We shouldn't wait for data inihibit for stop commands, even
- * though they might use busy signaling
- */
- if (data)
- mask &= ~(1 << 1);
-
- while (readl(&host->reg->prnsts) & mask) {
- if (timeout == 0) {
- printf("%s: timeout error\n", __func__);
- return -1;
- }
- timeout--;
- udelay(1000);
- }
-
- if (data)
- mmc_prepare_data(host, data);
-
- debug("cmd->arg: %08x\n", cmd->cmdarg);
- writel(cmd->cmdarg, &host->reg->argument);
-
- if (data)
- mmc_set_transfer_mode(host, data);
-
- if ((cmd->resp_type & MMC_RSP_136) && (cmd->resp_type & MMC_RSP_BUSY))
- return -1;
-
- /*
- * CMDREG
- * CMDIDX[13:8] : Command index
- * DATAPRNT[5] : Data Present Select
- * ENCMDIDX[4] : Command Index Check Enable
- * ENCMDCRC[3] : Command CRC Check Enable
- * RSPTYP[1:0]
- * 00 = No Response
- * 01 = Length 136
- * 10 = Length 48
- * 11 = Length 48 Check busy after response
- */
- if (!(cmd->resp_type & MMC_RSP_PRESENT))
- flags = 0;
- else if (cmd->resp_type & MMC_RSP_136)
- flags = (1 << 0);
- else if (cmd->resp_type & MMC_RSP_BUSY)
- flags = (3 << 0);
- else
- flags = (2 << 0);
-
- if (cmd->resp_type & MMC_RSP_CRC)
- flags |= (1 << 3);
- if (cmd->resp_type & MMC_RSP_OPCODE)
- flags |= (1 << 4);
- if (data)
- flags |= (1 << 5);
-
- debug("cmd: %d\n", cmd->cmdidx);
-
- writew((cmd->cmdidx << 8) | flags, &host->reg->cmdreg);
-
- for (i = 0; i < retry; i++) {
- mask = readl(&host->reg->norintsts);
- /* Command Complete */
- if (mask & (1 << 0)) {
- if (!data)
- writel(mask, &host->reg->norintsts);
- break;
- }
- }
-
- if (i == retry) {
- printf("%s: waiting for status update\n", __func__);
- return TIMEOUT;
- }
-
- if (mask & (1 << 16)) {
- /* Timeout Error */
- debug("timeout: %08x cmd %d\n", mask, cmd->cmdidx);
- return TIMEOUT;
- } else if (mask & (1 << 15)) {
- /* Error Interrupt */
- debug("error: %08x cmd %d\n", mask, cmd->cmdidx);
- return -1;
- }
-
- if (cmd->resp_type & MMC_RSP_PRESENT) {
- if (cmd->resp_type & MMC_RSP_136) {
- /* CRC is stripped so we need to do some shifting. */
- for (i = 0; i < 4; i++) {
- unsigned int offset =
- (unsigned int)(&host->reg->rspreg3 - i);
- cmd->response[i] = readl(offset) << 8;
-
- if (i != 3) {
- cmd->response[i] |=
- readb(offset - 1);
- }
- debug("cmd->resp[%d]: %08x\n",
- i, cmd->response[i]);
- }
- } else if (cmd->resp_type & MMC_RSP_BUSY) {
- for (i = 0; i < retry; i++) {
- /* PRNTDATA[23:20] : DAT[3:0] Line Signal */
- if (readl(&host->reg->prnsts)
- & (1 << 20)) /* DAT[0] */
- break;
- }
-
- if (i == retry) {
- printf("%s: card is still busy\n", __func__);
- return TIMEOUT;
- }
-
- cmd->response[0] = readl(&host->reg->rspreg0);
- debug("cmd->resp[0]: %08x\n", cmd->response[0]);
- } else {
- cmd->response[0] = readl(&host->reg->rspreg0);
- debug("cmd->resp[0]: %08x\n", cmd->response[0]);
- }
- }
-
- if (data) {
- while (1) {
- mask = readl(&host->reg->norintsts);
-
- if (mask & (1 << 15)) {
- /* Error Interrupt */
- writel(mask, &host->reg->norintsts);
- printf("%s: error during transfer: 0x%08x\n",
- __func__, mask);
- return -1;
- } else if (mask & (1 << 3)) {
- /* DMA Interrupt */
- debug("DMA end\n");
- break;
- } else if (mask & (1 << 1)) {
- /* Transfer Complete */
- debug("r/w is done\n");
- break;
- }
- }
- writel(mask, &host->reg->norintsts);
- }
-
- udelay(1000);
- return 0;
-}
-
-static void mmc_change_clock(struct mmc_host *host, uint clock)
-{
- int div;
- unsigned short clk;
- unsigned long timeout;
- unsigned long ctrl2;
-
- /*
- * SELBASECLK[5:4]
- * 00/01 = HCLK
- * 10 = EPLL
- * 11 = XTI or XEXTCLK
- */
- ctrl2 = readl(&host->reg->control2);
- ctrl2 &= ~(3 << 4);
- ctrl2 |= (2 << 4);
- writel(ctrl2, &host->reg->control2);
-
- writew(0, &host->reg->clkcon);
-
- /* XXX: we assume that clock is between 40MHz and 50MHz */
- if (clock == 0)
- goto out;
- else if (clock <= 400000)
- div = 0x100;
- else if (clock <= 20000000)
- div = 4;
- else if (clock <= 26000000)
- div = 2;
- else
- div = 1;
- debug("div: %d\n", div);
-
- div >>= 1;
- /*
- * CLKCON
- * SELFREQ[15:8] : base clock divied by value
- * ENSDCLK[2] : SD Clock Enable
- * STBLINTCLK[1] : Internal Clock Stable
- * ENINTCLK[0] : Internal Clock Enable
- */
- clk = (div << 8) | (1 << 0);
- writew(clk, &host->reg->clkcon);
-
- set_mmc_clk(host->dev_index, div);
-
- /* Wait max 10 ms */
- timeout = 10;
- while (!(readw(&host->reg->clkcon) & (1 << 1))) {
- if (timeout == 0) {
- printf("%s: timeout error\n", __func__);
- return;
- }
- timeout--;
- udelay(1000);
- }
-
- clk |= (1 << 2);
- writew(clk, &host->reg->clkcon);
-
-out:
- host->clock = clock;
-}
-
-static void mmc_set_ios(struct mmc *mmc)
-{
- struct mmc_host *host = mmc->priv;
- unsigned char ctrl;
- unsigned long val;
-
- debug("bus_width: %x, clock: %d\n", mmc->bus_width, mmc->clock);
-
- /*
- * SELCLKPADDS[17:16]
- * 00 = 2mA
- * 01 = 4mA
- * 10 = 7mA
- * 11 = 9mA
- */
- writel(0x3 << 16, &host->reg->control4);
-
- val = readl(&host->reg->control2);
- val &= (0x3 << 4);
-
- val |= (1 << 31) | /* write status clear async mode enable */
- (1 << 30) | /* command conflict mask enable */
- (1 << 14) | /* Feedback Clock Enable for Rx Clock */
- (1 << 8); /* SDCLK hold enable */
-
- writel(val, &host->reg->control2);
-
- /*
- * FCSEL1[15] FCSEL0[7]
- * FCSel[1:0] : Rx Feedback Clock Delay Control
- * Inverter delay means10ns delay if SDCLK 50MHz setting
- * 01 = Delay1 (basic delay)
- * 11 = Delay2 (basic delay + 2ns)
- * 00 = Delay3 (inverter delay)
- * 10 = Delay4 (inverter delay + 2ns)
- */
- writel(0x8080, &host->reg->control3);
-
- mmc_change_clock(host, mmc->clock);
-
- ctrl = readb(&host->reg->hostctl);
-
- /*
- * WIDE8[5]
- * 0 = Depend on WIDE4
- * 1 = 8-bit mode
- * WIDE4[1]
- * 1 = 4-bit mode
- * 0 = 1-bit mode
- */
- if (mmc->bus_width == 8)
- ctrl |= (1 << 5);
- else if (mmc->bus_width == 4)
- ctrl |= (1 << 1);
- else
- ctrl &= ~(1 << 1);
-
- /*
- * OUTEDGEINV[2]
- * 1 = Riging edge output
- * 0 = Falling edge output
- */
- ctrl &= ~(1 << 2);
-
- writeb(ctrl, &host->reg->hostctl);
-}
-
-static void mmc_reset(struct mmc_host *host)
-{
- unsigned int timeout;
-
- /*
- * RSTALL[0] : Software reset for all
- * 1 = reset
- * 0 = work
- */
- writeb((1 << 0), &host->reg->swrst);
-
- host->clock = 0;
-
- /* Wait max 100 ms */
- timeout = 100;
-
- /* hw clears the bit when it's done */
- while (readb(&host->reg->swrst) & (1 << 0)) {
- if (timeout == 0) {
- printf("%s: timeout error\n", __func__);
- return;
- }
- timeout--;
- udelay(1000);
- }
-}
-
-static int mmc_core_init(struct mmc *mmc)
-{
- struct mmc_host *host = (struct mmc_host *)mmc->priv;
- unsigned int mask;
-
- mmc_reset(host);
-
- host->version = readw(&host->reg->hcver);
-
- /* mask all */
- writel(0xffffffff, &host->reg->norintstsen);
- writel(0xffffffff, &host->reg->norintsigen);
-
- writeb(0xe, &host->reg->timeoutcon); /* TMCLK * 2^27 */
-
- /*
- * NORMAL Interrupt Status Enable Register init
- * [5] ENSTABUFRDRDY : Buffer Read Ready Status Enable
- * [4] ENSTABUFWTRDY : Buffer write Ready Status Enable
- * [1] ENSTASTANSCMPLT : Transfre Complete Status Enable
- * [0] ENSTACMDCMPLT : Command Complete Status Enable
- */
- mask = readl(&host->reg->norintstsen);
- mask &= ~(0xffff);
- mask |= (1 << 5) | (1 << 4) | (1 << 1) | (1 << 0);
- writel(mask, &host->reg->norintstsen);
-
- /*
- * NORMAL Interrupt Signal Enable Register init
- * [1] ENSTACMDCMPLT : Transfer Complete Signal Enable
- */
- mask = readl(&host->reg->norintsigen);
- mask &= ~(0xffff);
- mask |= (1 << 1);
- writel(mask, &host->reg->norintsigen);
-
- return 0;
-}
-
-static int s5p_mmc_initialize(int dev_index, int bus_width)
-{
- struct mmc *mmc;
-
- mmc = &mmc_dev[dev_index];
-
- sprintf(mmc->name, "SAMSUNG SD/MMC");
- mmc->priv = &mmc_host[dev_index];
- mmc->send_cmd = mmc_send_cmd;
- mmc->set_ios = mmc_set_ios;
- mmc->init = mmc_core_init;
-
- mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
- if (bus_width == 8)
- mmc->host_caps = MMC_MODE_8BIT;
- else
- mmc->host_caps = MMC_MODE_4BIT;
- mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
-
- mmc->f_min = 400000;
- mmc->f_max = 52000000;
-
- mmc_host[dev_index].dev_index = dev_index;
- mmc_host[dev_index].clock = 0;
- mmc_host[dev_index].reg = s5p_get_base_mmc(dev_index);
- mmc->b_max = 0;
- mmc_register(mmc);
-
- return 0;
-}
-
-int s5p_mmc_init(int dev_index, int bus_width)
-{
- return s5p_mmc_initialize(dev_index, bus_width);
-}
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
new file mode 100644
index 0000000..280738f
--- /dev/null
+++ b/drivers/mmc/sdhci.c
@@ -0,0 +1,482 @@
+/*
+ * (C) Copyright 2009 SAMSUNG Electronics
+ * Minkyu Kang <mk7.kang at samsung.com>
+ * Jaehoon Chung <jh80.chung at samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mmc.h>
+#include <asm/io.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/clk.h>
+
+/* support 4 mmc hosts */
+struct mmc mmc_dev[4];
+struct mmc_host mmc_host[4];
+
+static inline struct s5p_mmc *s5p_get_base_mmc(int dev_index)
+{
+ unsigned long offset = dev_index * sizeof(struct s5p_mmc);
+ return (struct s5p_mmc *)(samsung_get_base_mmc() + offset);
+}
+
+static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data)
+{
+ unsigned char ctrl;
+
+ debug("data->dest: %08x\n", (u32)data->dest);
+ writel((u32)data->dest, &host->reg->sysad);
+ /*
+ * DMASEL[4:3]
+ * 00 = Selects SDMA
+ * 01 = Reserved
+ * 10 = Selects 32-bit Address ADMA2
+ * 11 = Selects 64-bit Address ADMA2
+ */
+ ctrl = readb(&host->reg->hostctl);
+ ctrl &= ~(3 << 3);
+ writeb(ctrl, &host->reg->hostctl);
+
+ /* We do not handle DMA boundaries, so set it to max (512 KiB) */
+ writew((7 << 12) | (data->blocksize & 0xFFF), &host->reg->blksize);
+ writew(data->blocks, &host->reg->blkcnt);
+}
+
+static void mmc_set_transfer_mode(struct mmc_host *host, struct mmc_data *data)
+{
+ unsigned short mode;
+
+ /*
+ * TRNMOD
+ * MUL1SIN0[5] : Multi/Single Block Select
+ * RD1WT0[4] : Data Transfer Direction Select
+ * 1 = read
+ * 0 = write
+ * ENACMD12[2] : Auto CMD12 Enable
+ * ENBLKCNT[1] : Block Count Enable
+ * ENDMA[0] : DMA Enable
+ */
+ mode = (1 << 1) | (1 << 0);
+ if (data->blocks > 1)
+ mode |= (1 << 5);
+ if (data->flags & MMC_DATA_READ)
+ mode |= (1 << 4);
+
+ writew(mode, &host->reg->trnmod);
+}
+
+static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
+ struct mmc_data *data)
+{
+ struct mmc_host *host = (struct mmc_host *)mmc->priv;
+ int flags, i;
+ unsigned int timeout;
+ unsigned int mask;
+ unsigned int retry = 0x100000;
+
+ /* Wait max 10 ms */
+ timeout = 10;
+
+ /*
+ * PRNSTS
+ * CMDINHDAT[1] : Command Inhibit (DAT)
+ * CMDINHCMD[0] : Command Inhibit (CMD)
+ */
+ mask = (1 << 0);
+ if ((data != NULL) || (cmd->resp_type & MMC_RSP_BUSY))
+ mask |= (1 << 1);
+
+ /*
+ * We shouldn't wait for data inihibit for stop commands, even
+ * though they might use busy signaling
+ */
+ if (data)
+ mask &= ~(1 << 1);
+
+ while (readl(&host->reg->prnsts) & mask) {
+ if (timeout == 0) {
+ printf("%s: timeout error\n", __func__);
+ return -1;
+ }
+ timeout--;
+ udelay(1000);
+ }
+
+ if (data)
+ mmc_prepare_data(host, data);
+
+ debug("cmd->arg: %08x\n", cmd->cmdarg);
+ writel(cmd->cmdarg, &host->reg->argument);
+
+ if (data)
+ mmc_set_transfer_mode(host, data);
+
+ if ((cmd->resp_type & MMC_RSP_136) && (cmd->resp_type & MMC_RSP_BUSY))
+ return -1;
+
+ /*
+ * CMDREG
+ * CMDIDX[13:8] : Command index
+ * DATAPRNT[5] : Data Present Select
+ * ENCMDIDX[4] : Command Index Check Enable
+ * ENCMDCRC[3] : Command CRC Check Enable
+ * RSPTYP[1:0]
+ * 00 = No Response
+ * 01 = Length 136
+ * 10 = Length 48
+ * 11 = Length 48 Check busy after response
+ */
+ if (!(cmd->resp_type & MMC_RSP_PRESENT))
+ flags = 0;
+ else if (cmd->resp_type & MMC_RSP_136)
+ flags = (1 << 0);
+ else if (cmd->resp_type & MMC_RSP_BUSY)
+ flags = (3 << 0);
+ else
+ flags = (2 << 0);
+
+ if (cmd->resp_type & MMC_RSP_CRC)
+ flags |= (1 << 3);
+ if (cmd->resp_type & MMC_RSP_OPCODE)
+ flags |= (1 << 4);
+ if (data)
+ flags |= (1 << 5);
+
+ debug("cmd: %d\n", cmd->cmdidx);
+
+ writew((cmd->cmdidx << 8) | flags, &host->reg->cmdreg);
+
+ for (i = 0; i < retry; i++) {
+ mask = readl(&host->reg->norintsts);
+ /* Command Complete */
+ if (mask & (1 << 0)) {
+ if (!data)
+ writel(mask, &host->reg->norintsts);
+ break;
+ }
+ }
+
+ if (i == retry) {
+ printf("%s: waiting for status update\n", __func__);
+ return TIMEOUT;
+ }
+
+ if (mask & (1 << 16)) {
+ /* Timeout Error */
+ debug("timeout: %08x cmd %d\n", mask, cmd->cmdidx);
+ return TIMEOUT;
+ } else if (mask & (1 << 15)) {
+ /* Error Interrupt */
+ debug("error: %08x cmd %d\n", mask, cmd->cmdidx);
+ return -1;
+ }
+
+ if (cmd->resp_type & MMC_RSP_PRESENT) {
+ if (cmd->resp_type & MMC_RSP_136) {
+ /* CRC is stripped so we need to do some shifting. */
+ for (i = 0; i < 4; i++) {
+ unsigned int offset =
+ (unsigned int)(&host->reg->rspreg3 - i);
+ cmd->response[i] = readl(offset) << 8;
+
+ if (i != 3) {
+ cmd->response[i] |=
+ readb(offset - 1);
+ }
+ debug("cmd->resp[%d]: %08x\n",
+ i, cmd->response[i]);
+ }
+ } else if (cmd->resp_type & MMC_RSP_BUSY) {
+ for (i = 0; i < retry; i++) {
+ /* PRNTDATA[23:20] : DAT[3:0] Line Signal */
+ if (readl(&host->reg->prnsts)
+ & (1 << 20)) /* DAT[0] */
+ break;
+ }
+
+ if (i == retry) {
+ printf("%s: card is still busy\n", __func__);
+ return TIMEOUT;
+ }
+
+ cmd->response[0] = readl(&host->reg->rspreg0);
+ debug("cmd->resp[0]: %08x\n", cmd->response[0]);
+ } else {
+ cmd->response[0] = readl(&host->reg->rspreg0);
+ debug("cmd->resp[0]: %08x\n", cmd->response[0]);
+ }
+ }
+
+ if (data) {
+ while (1) {
+ mask = readl(&host->reg->norintsts);
+
+ if (mask & (1 << 15)) {
+ /* Error Interrupt */
+ writel(mask, &host->reg->norintsts);
+ printf("%s: error during transfer: 0x%08x\n",
+ __func__, mask);
+ return -1;
+ } else if (mask & (1 << 3)) {
+ /* DMA Interrupt */
+ debug("DMA end\n");
+ break;
+ } else if (mask & (1 << 1)) {
+ /* Transfer Complete */
+ debug("r/w is done\n");
+ break;
+ }
+ }
+ writel(mask, &host->reg->norintsts);
+ }
+
+ udelay(1000);
+ return 0;
+}
+
+static void mmc_change_clock(struct mmc_host *host, uint clock)
+{
+ int div;
+ unsigned short clk;
+ unsigned long timeout;
+ unsigned long ctrl2;
+
+ /*
+ * SELBASECLK[5:4]
+ * 00/01 = HCLK
+ * 10 = EPLL
+ * 11 = XTI or XEXTCLK
+ */
+ ctrl2 = readl(&host->reg->control2);
+ ctrl2 &= ~(3 << 4);
+ ctrl2 |= (2 << 4);
+ writel(ctrl2, &host->reg->control2);
+
+ writew(0, &host->reg->clkcon);
+
+ /* XXX: we assume that clock is between 40MHz and 50MHz */
+ if (clock == 0)
+ goto out;
+ else if (clock <= 400000)
+ div = 0x100;
+ else if (clock <= 20000000)
+ div = 4;
+ else if (clock <= 26000000)
+ div = 2;
+ else
+ div = 1;
+ debug("div: %d\n", div);
+
+ div >>= 1;
+ /*
+ * CLKCON
+ * SELFREQ[15:8] : base clock divied by value
+ * ENSDCLK[2] : SD Clock Enable
+ * STBLINTCLK[1] : Internal Clock Stable
+ * ENINTCLK[0] : Internal Clock Enable
+ */
+ clk = (div << 8) | (1 << 0);
+ writew(clk, &host->reg->clkcon);
+
+ set_mmc_clk(host->dev_index, div);
+
+ /* Wait max 10 ms */
+ timeout = 10;
+ while (!(readw(&host->reg->clkcon) & (1 << 1))) {
+ if (timeout == 0) {
+ printf("%s: timeout error\n", __func__);
+ return;
+ }
+ timeout--;
+ udelay(1000);
+ }
+
+ clk |= (1 << 2);
+ writew(clk, &host->reg->clkcon);
+
+out:
+ host->clock = clock;
+}
+
+static void mmc_set_ios(struct mmc *mmc)
+{
+ struct mmc_host *host = mmc->priv;
+ unsigned char ctrl;
+ unsigned long val;
+
+ debug("bus_width: %x, clock: %d\n", mmc->bus_width, mmc->clock);
+
+ /*
+ * SELCLKPADDS[17:16]
+ * 00 = 2mA
+ * 01 = 4mA
+ * 10 = 7mA
+ * 11 = 9mA
+ */
+ writel(0x3 << 16, &host->reg->control4);
+
+ val = readl(&host->reg->control2);
+ val &= (0x3 << 4);
+
+ val |= (1 << 31) | /* write status clear async mode enable */
+ (1 << 30) | /* command conflict mask enable */
+ (1 << 14) | /* Feedback Clock Enable for Rx Clock */
+ (1 << 8); /* SDCLK hold enable */
+
+ writel(val, &host->reg->control2);
+
+ /*
+ * FCSEL1[15] FCSEL0[7]
+ * FCSel[1:0] : Rx Feedback Clock Delay Control
+ * Inverter delay means10ns delay if SDCLK 50MHz setting
+ * 01 = Delay1 (basic delay)
+ * 11 = Delay2 (basic delay + 2ns)
+ * 00 = Delay3 (inverter delay)
+ * 10 = Delay4 (inverter delay + 2ns)
+ */
+ writel(0x8080, &host->reg->control3);
+
+ mmc_change_clock(host, mmc->clock);
+
+ ctrl = readb(&host->reg->hostctl);
+
+ /*
+ * WIDE8[5]
+ * 0 = Depend on WIDE4
+ * 1 = 8-bit mode
+ * WIDE4[1]
+ * 1 = 4-bit mode
+ * 0 = 1-bit mode
+ */
+ if (mmc->bus_width == 8)
+ ctrl |= (1 << 5);
+ else if (mmc->bus_width == 4)
+ ctrl |= (1 << 1);
+ else
+ ctrl &= ~(1 << 1);
+
+ /*
+ * OUTEDGEINV[2]
+ * 1 = Riging edge output
+ * 0 = Falling edge output
+ */
+ ctrl &= ~(1 << 2);
+
+ writeb(ctrl, &host->reg->hostctl);
+}
+
+static void mmc_reset(struct mmc_host *host)
+{
+ unsigned int timeout;
+
+ /*
+ * RSTALL[0] : Software reset for all
+ * 1 = reset
+ * 0 = work
+ */
+ writeb((1 << 0), &host->reg->swrst);
+
+ host->clock = 0;
+
+ /* Wait max 100 ms */
+ timeout = 100;
+
+ /* hw clears the bit when it's done */
+ while (readb(&host->reg->swrst) & (1 << 0)) {
+ if (timeout == 0) {
+ printf("%s: timeout error\n", __func__);
+ return;
+ }
+ timeout--;
+ udelay(1000);
+ }
+}
+
+static int mmc_core_init(struct mmc *mmc)
+{
+ struct mmc_host *host = (struct mmc_host *)mmc->priv;
+ unsigned int mask;
+
+ mmc_reset(host);
+
+ host->version = readw(&host->reg->hcver);
+
+ /* mask all */
+ writel(0xffffffff, &host->reg->norintstsen);
+ writel(0xffffffff, &host->reg->norintsigen);
+
+ writeb(0xe, &host->reg->timeoutcon); /* TMCLK * 2^27 */
+
+ /*
+ * NORMAL Interrupt Status Enable Register init
+ * [5] ENSTABUFRDRDY : Buffer Read Ready Status Enable
+ * [4] ENSTABUFWTRDY : Buffer write Ready Status Enable
+ * [1] ENSTASTANSCMPLT : Transfre Complete Status Enable
+ * [0] ENSTACMDCMPLT : Command Complete Status Enable
+ */
+ mask = readl(&host->reg->norintstsen);
+ mask &= ~(0xffff);
+ mask |= (1 << 5) | (1 << 4) | (1 << 1) | (1 << 0);
+ writel(mask, &host->reg->norintstsen);
+
+ /*
+ * NORMAL Interrupt Signal Enable Register init
+ * [1] ENSTACMDCMPLT : Transfer Complete Signal Enable
+ */
+ mask = readl(&host->reg->norintsigen);
+ mask &= ~(0xffff);
+ mask |= (1 << 1);
+ writel(mask, &host->reg->norintsigen);
+
+ return 0;
+}
+
+static int s5p_mmc_initialize(int dev_index, int bus_width)
+{
+ struct mmc *mmc;
+
+ mmc = &mmc_dev[dev_index];
+
+ sprintf(mmc->name, "SAMSUNG SD/MMC");
+ mmc->priv = &mmc_host[dev_index];
+ mmc->send_cmd = mmc_send_cmd;
+ mmc->set_ios = mmc_set_ios;
+ mmc->init = mmc_core_init;
+
+ mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
+ if (bus_width == 8)
+ mmc->host_caps = MMC_MODE_8BIT;
+ else
+ mmc->host_caps = MMC_MODE_4BIT;
+ mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
+
+ mmc->f_min = 400000;
+ mmc->f_max = 52000000;
+
+ mmc_host[dev_index].dev_index = dev_index;
+ mmc_host[dev_index].clock = 0;
+ mmc_host[dev_index].reg = s5p_get_base_mmc(dev_index);
+ mmc->b_max = 0;
+ mmc_register(mmc);
+
+ return 0;
+}
+
+int s5p_mmc_init(int dev_index, int bus_width)
+{
+ return s5p_mmc_initialize(dev_index, bus_width);
+}
--
1.7.4.1
More information about the U-Boot
mailing list