[U-Boot] [PATCH] imx31_phycore: Fix build by using new relocation scheme

[Fabio Estevam]

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
Build tested only. Don't have access to this hardware.

 board/imx31_phycore/config.mk       |    1 -
 board/imx31_phycore/imx31_phycore.c |   22 ++++++++++++++--------
 include/configs/imx31_phycore.h     |   12 ++++++++++++
 3 files changed, 26 insertions(+), 9 deletions(-)
 delete mode 100644 board/imx31_phycore/config.mk

diff --git a/board/imx31_phycore/config.mk b/board/imx31_phycore/config.mk
deleted file mode 100644
index 0131edf..0000000
--- a/board/imx31_phycore/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x87f00000
diff --git a/board/imx31_phycore/imx31_phycore.c b/board/imx31_phycore/imx31_phycore.c
index 82daaa3..87b04d9 100644
--- a/board/imx31_phycore/imx31_phycore.c
+++ b/board/imx31_phycore/imx31_phycore.c
@@ -30,15 +30,24 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-int dram_init (void)
+int dram_init(void)
 {
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+	/* dram_init must store complete ramsize in gd->ram_size */
+	gd->ram_size = get_ram_size((volatile void *)PHYS_SDRAM_1,
+				PHYS_SDRAM_1_SIZE);
+	return 0;
+}
+
+int board_init(void)
+{
+
+	gd->bd->bi_arch_number = MACH_TYPE_PCM037;	/* board id for linux */
+	gd->bd->bi_boot_params = (0x80000100);	/* adress of boot parameters */
 
 	return 0;
 }
 
-int board_init (void)
+int board_early_init_f(void)
 {
 	__REG(CSCR_U(0)) = 0x0000cf03; /* CS0: Nor Flash */
 	__REG(CSCR_L(0)) = 0x10000d03;
@@ -61,10 +70,7 @@ int board_init (void)
 	/* setup pins for I2C2 (for EEPROM, RTC) */
 	mx31_gpio_mux(MUX_CSPI2_MOSI__I2C2_SCL);
 	mx31_gpio_mux(MUX_CSPI2_MISO__I2C2_SDA);
-
-	gd->bd->bi_arch_number = MACH_TYPE_PCM037;	/* board id for linux */
-	gd->bd->bi_boot_params = (0x80000100);		/* adress of boot parameters */
-
+
 	return 0;
 }
 
diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h
index 4d11f97..a0c0f1b 100644
--- a/include/configs/imx31_phycore.h
+++ b/include/configs/imx31_phycore.h
@@ -28,6 +28,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <asm/arch/imx-regs.h>
+
  /* High Level Configuration Options */
 #define CONFIG_ARM1136		1    /* This is an arm1136 CPU core */
 #define CONFIG_MX31		1    /* in a mx31 */
@@ -143,6 +145,16 @@
 #define CONFIG_NR_DRAM_BANKS	1
 #define PHYS_SDRAM_1		0x80000000
 #define PHYS_SDRAM_1_SIZE	(128 * 1024 * 1024)
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_SYS_TEXT_BASE		0xA0000000
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
+						GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_INIT_RAM_ADDR + \
+						CONFIG_SYS_GBL_DATA_OFFSET)
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
-- 
1.7.1