[U-Boot] [PATCH 2/2] arm/km: fix u-boot.kwb build breakage

[Holger Brunck]

commit 010a958b
(arm/km: remove CONFIG_SYS_KWD_CONFIG from keymile-common.h)
breaks building keymile arm targets, when u-boot.kwb tries to
generate the binary with mkimage. A simple make <board> or MAKEALL
succeeded because it don't try to build the kirwood binary at the end.

Due this commit we use the CONFIG_SYS_KWD_CONFIG from the
arch-kirkwood/config.h and it was removed from the board config.
But it was forgotten to include the header. Now the header is included
in km_arm.h. Some other defines were obsolete due to this include,
these are also removed in this commit.

Signed-off-by: Holger Brunck <holger.brunck at keymile.com>
cc: Valentin Longchamp <valentin.longchamp at keymile.com>
cc: Prafulla Wadaskar <prafulla at marvell.com>
cc: Heiko Schocher <hs at denx.de>
---
 include/configs/km/km_arm.h |   30 +++++++-----------------------
 include/configs/mgcoge3un.h |    1 +
 2 files changed, 8 insertions(+), 23 deletions(-)

diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h
index 20ee6ea..29815be 100644
--- a/include/configs/km/km_arm.h
+++ b/include/configs/km/km_arm.h
@@ -40,15 +40,20 @@
  * High Level Configuration Options (easy to change)
  */
 #define CONFIG_MARVELL
-#define CONFIG_ARM926EJS		/* Basic Architecture */
 #define CONFIG_FEROCEON_88FR131		/* CPU Core subversion */
 #define CONFIG_KIRKWOOD			/* SOC Family Name */
-#define CONFIG_KW88F6281		/* SOC Name */
 #define CONFIG_MACH_KM_KIRKWOOD		/* Machine type */
 
 /* include common defines/options for all Keymile boards */
 #include "keymile-common.h"
 
+#define CONFIG_KW88F6281		/* SOC Name */
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_SF
+#define CONFIG_SOFT_I2C		/* I2C bit-banged	*/
+
+#include "asm/arch/config.h"
+
 #define CONFIG_SYS_TEXT_BASE	0x04000000	/* code address after reloc */
 #define CONFIG_ENV_SIZE		(128 << 10)	/* NAND chip block size	*/
 #define CONFIG_SYS_MEMTEST_START 0x00400000	/* 4M */
@@ -75,12 +80,7 @@
 
 #define CONFIG_KM_ARCH_DBG_FILE		"scripts/debug-arm-env.txt"
 
-#define CONFIG_MD5	/* get_random_hex on krikwood needs MD5 support */
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
-#define CONFIG_KIRKWOOD_EGIGA_INIT	/* Enable GbePort0/1 for kernel */
-#undef  CONFIG_KIRKWOOD_PCIE_INIT	/* Disable PCIE Port0 for kernel */
-#define CONFIG_KIRKWOOD_RGMII_PAD_1V8	/* Set RGMII Pad voltage to 1.8V */
-
 #define CONFIG_MISC_INIT_R
 
 /*
@@ -116,7 +116,6 @@
  */
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_MTDPARTS
-#define CONFIG_CMD_NAND
 #define CONFIG_CMD_NFS
 
 /*
@@ -131,8 +130,6 @@
  */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define NAND_MAX_CHIPS			1
-#define CONFIG_NAND_KIRKWOOD
-#define CONFIG_SYS_NAND_BASE		0xd8000000
 
 #define BOOTFLASH_START		0x0
 
@@ -175,8 +172,6 @@
 /*
  * I2C related stuff
  */
-#define	CONFIG_SOFT_I2C		/* I2C bit-banged	*/
-
 #define	CONFIG_KIRKWOOD_GPIO		/* Enable GPIO Support */
 #if defined(CONFIG_SOFT_I2C)
 #ifndef __ASSEMBLY__
@@ -200,8 +195,6 @@ int get_scl(void);
 #define I2C_DELAY	udelay(3)	/* 1/4 I2C clock duration */
 #define I2C_SOFT_DECLARATIONS
 
-#define	CONFIG_SYS_I2C_SLAVE		0x0
-#define	CONFIG_SYS_I2C_SPEED		100000
 #endif
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
@@ -224,15 +217,8 @@ int get_scl(void);
 #define CONFIG_ENV_OFFSET_REDUND	0x2000 /* no bracets! */
 #define CONFIG_ENV_SIZE_REDUND		(CONFIG_ENV_SIZE)
 
-#define CONFIG_CMD_SF
-
 #define CONFIG_SPI_FLASH
-#define CONFIG_HARD_SPI
-#define CONFIG_KIRKWOOD_SPI
 #define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_ENV_SPI_BUS		0
-#define CONFIG_ENV_SPI_CS		0
-#define CONFIG_ENV_SPI_MAX_HZ		50000000	/* 50Mhz */
 
 #define FLASH_GPIO_PIN			0x00010000
 
@@ -272,8 +258,6 @@ int get_scl(void);
 
 /* additions for new relocation code, must be added to all boards */
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
-/* Kirkwood has 2k of Security SRAM, use it for SP */
-#define CONFIG_SYS_INIT_SP_ADDR		0xC8012000
 /* Do early setups now in board_init_f() */
 #define CONFIG_BOARD_EARLY_INIT_F
 
diff --git a/include/configs/mgcoge3un.h b/include/configs/mgcoge3un.h
index 6d56d7d..8d1b61f 100644
--- a/include/configs/mgcoge3un.h
+++ b/include/configs/mgcoge3un.h
@@ -48,6 +48,7 @@
 #define KM_ENV_BUS	"pca9547:70:d" /* I2C2 (Mux-Port 5)*/
 
 /* we use a new RAM type on mgcoge3un board */
+#undef CONFIG_SYS_KWD_CONFIG
 #define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-memphis.cfg
 
 /*
-- 
1.7.1