[U-Boot] [PATCH v3 5/5] arm/km: add support for portl2 board
Holger Brunck
holger.brunck at keymile.com
Wed Jun 15 16:41:49 CEST 2011
From: Valentin Longchamp <valentin.longchamp at keymile.com>
This adds support for the keymile Kirkwood BEC portl2 board. This board
relies on the km_arm (km_kirkwood) BEC.
The egiga driver is configured for a 100M full-duplex, A/N off connnection
to the backplane. This board has always ethernet present, because it is
connected to the marvell switch similar to mgcoge3un. The reset_phy
functionality is also the same to mgcoge3un.
Signed-off-by: Valentin Longchamp <valentin.longchamp at keymile.com>
Signed-off-by: Holger Brunck <holger.brunck at keymile.com>
cc: Prafulla Wadaskar <prafulla at marvell.com>
cc: Heiko Schocher <hs at denx.de>
---
Changes for v3:
- rebase
Changes for v2:
- add this board support patch to the end of the serie
MAINTAINERS | 1 +
MAKEALL | 1 +
board/keymile/km_arm/km_arm.c | 8 +++--
boards.cfg | 1 +
include/configs/portl2.h | 81 +++++++++++++++++++++++++++++++++++++++++
5 files changed, 89 insertions(+), 3 deletions(-)
create mode 100644 include/configs/portl2.h
diff --git a/MAINTAINERS b/MAINTAINERS
index d1ec392..653c928 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -729,6 +729,7 @@ Sergey Lapin <slapin at ossfans.org>
Valentin Longchamp <valentin.longchamp at keymile.com>
km_kirkwood ARM926EJS (Kirkwood SoC)
+ portl2 ARM926EJS (Kirkwood SoC)
Nishanth Menon <nm at ti.com>
diff --git a/MAKEALL b/MAKEALL
index 1798303..3f92449 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -364,6 +364,7 @@ LIST_ARM9=" \
openrd_base \
openrd_client \
openrd_ultimate \
+ portl2 \
rd6281a \
sbc2410x \
scb9328 \
diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c
index ed6ede3..5da856f 100644
--- a/board/keymile/km_arm/km_arm.c
+++ b/board/keymile/km_arm/km_arm.c
@@ -130,10 +130,12 @@ int startup_allowed(void)
return 1;
return 0;
}
+#endif
+#if (defined(CONFIG_MGCOGE3UN)|defined(CONFIG_PORTL2))
/*
- * mgcoge3un has always ethernet present. Its connected to the 6061 switch
- * and provides ICNev and piggy4 connections.
+ * These two boards have always ethernet present. Its connected to the mv
+ * switch.
*/
int ethernet_present(void)
{
@@ -335,7 +337,7 @@ void dram_init_banksize(void)
}
}
-#if defined(CONFIG_MGCOGE3UN)
+#if (defined(CONFIG_MGCOGE3UN)|defined(CONFIG_PORTL2))
#define PHY_LED_SEL 0x18
#define PHY_LED0_LINK (0x5)
diff --git a/boards.cfg b/boards.cfg
index 6a50236..649f1af 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -109,6 +109,7 @@ davinci_sonata arm arm926ejs sonata davinci
km_kirkwood arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_DISABLE_PCI
km_kirkwood_pci arm arm926ejs km_arm keymile kirkwood km_kirkwood
mgcoge3un arm arm926ejs km_arm keymile kirkwood
+portl2 arm arm926ejs km_arm keymile kirkwood
guruplug arm arm926ejs - Marvell kirkwood
mv88f6281gtw_ge arm arm926ejs - Marvell kirkwood
openrd_base arm arm926ejs openrd Marvell kirkwood openrd:BOARD_IS_OPENRD_BASE
diff --git a/include/configs/portl2.h b/include/configs/portl2.h
new file mode 100644
index 0000000..a8543a5
--- /dev/null
+++ b/include/configs/portl2.h
@@ -0,0 +1,81 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Prafulla Wadaskar <prafulla at marvell.com>
+ *
+ * (C) Copyright 2009
+ * Stefan Roese, DENX Software Engineering, sr at denx.de.
+ *
+ * (C) Copyright 2010-2011
+ * Holger Brunck, Keymile GmbH Hannover, holger.brunck at keymile.com.
+ * Valentin Longchamp, Keymile AG Bern, valentin.longchamp at keymile.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+/* for linking errors see
+ * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html */
+
+#ifndef _CONFIG_PORTL2_H
+#define _CONFIG_PORTL2_H
+
+/* include common defines/options for all arm based Keymile boards */
+#include "km/km_arm.h"
+
+/*
+ * Version number information
+ */
+#define CONFIG_IDENT_STRING "\nKeymile Port-L2"
+#define CONFIG_HOSTNAME portl2
+#define CONFIG_PORTL2
+
+#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/
+#define KM_ENV_BUS "pca9544a:70:a" /* I2C2 (Mux-Port 2)*/
+
+/*
+ * portl2 has a fixed link to the XMPP backplane
+ * with 100MB full duplex and autoneg off, for this
+ * reason we have to change the default settings
+ */
+#define PORT_SERIAL_CONTROL_VALUE ( \
+ MVGBE_FORCE_LINK_PASS | \
+ MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \
+ MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \
+ MVGBE_ADV_NO_FLOW_CTRL | \
+ MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \
+ MVGBE_FORCE_BP_MODE_NO_JAM | \
+ (1 << 9) /* Reserved bit has to be 1 */ | \
+ MVGBE_DO_NOT_FORCE_LINK_FAIL | \
+ MVGBE_DIS_AUTO_NEG_SPEED_GMII | \
+ MVGBE_DTE_ADV_0 | \
+ MVGBE_MIIPHY_MAC_MODE | \
+ MVGBE_AUTO_NEG_NO_CHANGE | \
+ MVGBE_MAX_RX_PACKET_1552BYTE | \
+ MVGBE_CLR_EXT_LOOPBACK | \
+ MVGBE_SET_FULL_DUPLEX_MODE | \
+ MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\
+ MVGBE_SET_GMII_SPEED_TO_10_100 |\
+ MVGBE_SET_MII_SPEED_TO_100)
+
+/*
+ * portl2 does use the PCIe Port0
+ */
+#define CONFIG_KIRKWOOD_PCIE_INIT
+
+#endif /* _CONFIG_PORTL2_H */
--
1.7.1
More information about the U-Boot
mailing list