[U-Boot] [PATCH v2 2/2] arm/km: fix u-boot.kwb build breakage

Prafulla Wadaskar prafulla at marvell.com
Thu Jun 16 13:21:17 CEST 2011



> -----Original Message-----
> From: Holger Brunck [mailto:holger.brunck at keymile.com]
> Sent: Wednesday, June 15, 2011 1:42 PM
> To: u-boot at lists.denx.de
> Cc: Holger Brunck; Valentin Longchamp; Prafulla Wadaskar; Heiko Schocher
> Subject: [PATCH v2 2/2] arm/km: fix u-boot.kwb build breakage
> 
> commit 010a958b
> (arm/km: remove CONFIG_SYS_KWD_CONFIG from keymile-common.h)
> breaks building keymile arm targets, when u-boot.kwb tries to
> generate the binary with mkimage. A simple make <board> or MAKEALL
> succeeded because it don't try to build the kirwood binary at the end.
> 
> Due this commit we use the CONFIG_SYS_KWD_CONFIG from the
> arch-kirkwood/config.h and it was removed from the board config.
> But it was forgotten to include the header. Now the header is included
> in km_arm.h. Some other defines were obsolete due to this include,
> these are also removed in this commit.
> 
> Signed-off-by: Holger Brunck <holger.brunck at keymile.com>
> cc: Valentin Longchamp <valentin.longchamp at keymile.com>
> cc: Prafulla Wadaskar <prafulla at marvell.com>
> cc: Heiko Schocher <hs at denx.de>
> ---
> changes for v2:
>   - move CONFIG_KW88F6281 to original place, it was unneeded to touch
>     this for the initial patch
> 
>  include/configs/km/km_arm.h |   28 ++++++----------------------
>  include/configs/mgcoge3un.h |    1 +
>  2 files changed, 7 insertions(+), 22 deletions(-)
> 
> diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h
> index 20ee6ea..4741278 100644
> --- a/include/configs/km/km_arm.h
> +++ b/include/configs/km/km_arm.h
> @@ -40,7 +40,6 @@
>   * High Level Configuration Options (easy to change)
>   */
>  #define CONFIG_MARVELL
> -#define CONFIG_ARM926EJS		/* Basic Architecture */
>  #define CONFIG_FEROCEON_88FR131		/* CPU Core subversion */
>  #define CONFIG_KIRKWOOD			/* SOC Family Name */
>  #define CONFIG_KW88F6281		/* SOC Name */
> @@ -49,6 +48,12 @@
>  /* include common defines/options for all Keymile boards */
>  #include "keymile-common.h"
> 
> +#define CONFIG_CMD_NAND
> +#define CONFIG_CMD_SF
> +#define CONFIG_SOFT_I2C		/* I2C bit-banged	*/
> +
> +#include "asm/arch/config.h"
> +
>  #define CONFIG_SYS_TEXT_BASE	0x04000000	/* code address after reloc
> */
>  #define CONFIG_ENV_SIZE		(128 << 10)	/* NAND chip block size	*/
>  #define CONFIG_SYS_MEMTEST_START 0x00400000	/* 4M */
> @@ -75,12 +80,7 @@
> 
>  #define CONFIG_KM_ARCH_DBG_FILE		"scripts/debug-arm-env.txt"
> 
> -#define CONFIG_MD5	/* get_random_hex on krikwood needs MD5 support */
>  #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
> -#define CONFIG_KIRKWOOD_EGIGA_INIT	/* Enable GbePort0/1 for kernel */
> -#undef  CONFIG_KIRKWOOD_PCIE_INIT	/* Disable PCIE Port0 for kernel */
> -#define CONFIG_KIRKWOOD_RGMII_PAD_1V8	/* Set RGMII Pad voltage to 1.8V
> */
> -
>  #define CONFIG_MISC_INIT_R
> 
>  /*
> @@ -116,7 +116,6 @@
>   */
>  #define CONFIG_CMD_ELF
>  #define CONFIG_CMD_MTDPARTS
> -#define CONFIG_CMD_NAND
>  #define CONFIG_CMD_NFS
> 
>  /*
> @@ -131,8 +130,6 @@
>   */
>  #define CONFIG_SYS_MAX_NAND_DEVICE	1
>  #define NAND_MAX_CHIPS			1
> -#define CONFIG_NAND_KIRKWOOD
> -#define CONFIG_SYS_NAND_BASE		0xd8000000
> 
>  #define BOOTFLASH_START		0x0
> 
> @@ -175,8 +172,6 @@
>  /*
>   * I2C related stuff
>   */
> -#define	CONFIG_SOFT_I2C		/* I2C bit-banged	*/
> -
>  #define	CONFIG_KIRKWOOD_GPIO		/* Enable GPIO Support */
>  #if defined(CONFIG_SOFT_I2C)
>  #ifndef __ASSEMBLY__
> @@ -200,8 +195,6 @@ int get_scl(void);
>  #define I2C_DELAY	udelay(3)	/* 1/4 I2C clock duration */
>  #define I2C_SOFT_DECLARATIONS
> 
> -#define	CONFIG_SYS_I2C_SLAVE		0x0
> -#define	CONFIG_SYS_I2C_SPEED		100000
>  #endif
> 
>  #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
> @@ -224,15 +217,8 @@ int get_scl(void);
>  #define CONFIG_ENV_OFFSET_REDUND	0x2000 /* no bracets! */
>  #define CONFIG_ENV_SIZE_REDUND		(CONFIG_ENV_SIZE)
> 
> -#define CONFIG_CMD_SF
> -
>  #define CONFIG_SPI_FLASH
> -#define CONFIG_HARD_SPI
> -#define CONFIG_KIRKWOOD_SPI
>  #define CONFIG_SPI_FLASH_STMICRO
> -#define CONFIG_ENV_SPI_BUS		0
> -#define CONFIG_ENV_SPI_CS		0
> -#define CONFIG_ENV_SPI_MAX_HZ		50000000	/* 50Mhz */
> 
>  #define FLASH_GPIO_PIN			0x00010000
> 
> @@ -272,8 +258,6 @@ int get_scl(void);
> 
>  /* additions for new relocation code, must be added to all boards */
>  #define CONFIG_SYS_SDRAM_BASE		0x00000000
> -/* Kirkwood has 2k of Security SRAM, use it for SP */
> -#define CONFIG_SYS_INIT_SP_ADDR		0xC8012000
>  /* Do early setups now in board_init_f() */
>  #define CONFIG_BOARD_EARLY_INIT_F
> 
> diff --git a/include/configs/mgcoge3un.h b/include/configs/mgcoge3un.h
> index 6d56d7d..8d1b61f 100644
> --- a/include/configs/mgcoge3un.h
> +++ b/include/configs/mgcoge3un.h
> @@ -48,6 +48,7 @@
>  #define KM_ENV_BUS	"pca9547:70:d" /* I2C2 (Mux-Port 5)*/
> 
>  /* we use a new RAM type on mgcoge3un board */
> +#undef CONFIG_SYS_KWD_CONFIG
>  #define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-
> memphis.cfg
> 
>  /*
> --

Applied to u-boot-marvell.git next brach

Regards..
Prafulla . .

> 1.7.1



More information about the U-Boot mailing list