[U-Boot] [PATCH 5/5] ARM: highbank: Add AHCI support

[Rob Herring]

From: Rob Herring <rob.herring at calxeda.com>

This enables the AHCI driver on highbank platforms.

Signed-off-by: Rob Herring <rob.herring at calxeda.com>
Cc: Wolfgang Denk <wd at denx.de>
Cc: Albert ARIBAUD <albert.aribaud at free.fr>
---
 board/highbank/highbank.c  |    9 +++++++++
 include/configs/highbank.h |   11 +++++++++++
 2 files changed, 20 insertions(+), 0 deletions(-)

diff --git a/board/highbank/highbank.c b/board/highbank/highbank.c
index 9a0fc19..bec3d2f 100644
--- a/board/highbank/highbank.c
+++ b/board/highbank/highbank.c
@@ -16,6 +16,8 @@
  */
 
 #include <common.h>
+#include <ahci.h>
+#include <scsi.h>
 
 #include <asm/sizes.h>
 
@@ -31,6 +33,13 @@ int board_init(void)
 	return 0;
 }
 
+int misc_init_r(void)
+{
+	ahci_init(0xffe08000);
+	scsi_scan(1);
+	return 0;
+}
+
 int dram_init(void)
 {
 	gd->ram_size = SZ_512M;
diff --git a/include/configs/highbank.h b/include/configs/highbank.h
index 6e26848..0ae198d 100644
--- a/include/configs/highbank.h
+++ b/include/configs/highbank.h
@@ -41,6 +41,15 @@
 #define CONFIG_BAUDRATE			38400
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
+#define CONFIG_MISC_INIT_R
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID	5
+#define CONFIG_SYS_SCSI_MAX_LUN		1
+#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+					CONFIG_SYS_SCSI_MAX_LUN)
+
+#define CONFIG_DOS_PARTITION
+
 /*
  * Command line configuration.
  */
@@ -52,6 +61,8 @@
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_MEMORY
 #define CONFIG_CMD_LOADS
+#define CONFIG_CMD_SCSI
+#define CONFIG_CMD_EXT2
 
 #define CONFIG_BOOTDELAY		2
 /*
-- 
1.7.4.1