[U-Boot] [PATCH v2] sh: Clean up rsk7264 board settings

Nobuhiro Iwamatsu iwamatsu at nigauri.org
Wed Jun 22 04:35:40 CEST 2011


Applied to next branch.

Thanks.

Nobuhiro

2011/6/9 Phil Edworthy <PHIL.EDWORTHY at renesas.com>:
> Adjusted default settings so that we can boot zImages and uImages.
> Removed unused settings, use default commands and where possible
> calculate all other settings.
>
> Signed-off-by: Phil Edworthy <phil.edworthy at renesas.com>
> Cc: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
> ---
> Changes for v2:
>   - Moved u-boot relocation address to top 256KB of ram
>   - Removed comments about how memory is used
>   - Less unnecessary tidying up
>
>  include/configs/rsk7264.h |   69 +++++++++++++++-----------------------------
>  1 files changed, 24 insertions(+), 45 deletions(-)
>
> diff --git a/include/configs/rsk7264.h b/include/configs/rsk7264.h
> index aef37d0..8801993 100644
> --- a/include/configs/rsk7264.h
> +++ b/include/configs/rsk7264.h
> @@ -1,5 +1,5 @@
>  /*
> - * Configuation settings for the Renesas Technology RSK 7264
> + * Configuation settings for the Renesas RSK2+SH7264 board
>  *
>  * Copyright (C) 2011 Renesas Electronics Europe Ltd.
>  * Copyright (C) 2008 Nobuhiro Iwamatsu
> @@ -17,83 +17,62 @@
>  #define CONFIG_SH2             1
>  #define CONFIG_SH2A            1
>  #define CONFIG_CPU_SH7264      1
> -#define CONFIG_RSK7264 1
> +#define CONFIG_RSK7264         1
>
> -#define CONFIG_CMD_FLASH
> -#define CONFIG_CMD_NET
> -#define CONFIG_CMD_NFS
> -#define CONFIG_CMD_PING
> -#define CONFIG_CMD_SAVEENV
> -#define CONFIG_CMD_SDRAM
> -#define CONFIG_CMD_MEMORY
> -#define CONFIG_CMD_CACHE
> +#ifndef _CONFIG_CMD_DEFAULT_H
> +# include <config_cmd_default.h>
> +#endif
>
>  #define CONFIG_BAUDRATE                115200
>  #define CONFIG_BOOTARGS                "console=ttySC3,115200"
>  #define CONFIG_BOOTDELAY       3
> -#define CONFIG_LOADADDR                0x0C100000 /* RSK7264_SDRAM_BASE + 1MB */
> +#define CONFIG_SYS_BAUDRATE_TABLE      { CONFIG_BAUDRATE }
>
> -#define CONFIG_VERSION_VARIABLE
> -#undef CONFIG_SHOW_BOOT_PROGRESS
> -
> -/* MEMORY */
> -#define RSK7264_SDRAM_BASE     0x0C000000
> -#define RSK7264_FLASH_BASE_1   0x20000000      /* Non cache */
> -
> -#define CONFIG_SYS_TEXT_BASE   0x0C1C0000
> -#define CONFIG_SYS_LONGHELP            /* undef to save memory */
> +#define CONFIG_SYS_LONGHELP    1       /* undef to save memory */
>  #define CONFIG_SYS_PROMPT      "=> "   /* Monitor Command Prompt */
>  #define CONFIG_SYS_CBSIZE      256     /* Buffer size for input from the Console */
>  #define CONFIG_SYS_PBSIZE      256     /* Buffer size for Console output */
>  #define CONFIG_SYS_MAXARGS     16      /* max args accepted for monitor commands */
> -/* Buffer size for Boot Arguments passed to kernel */
> -#define CONFIG_SYS_BARGSIZE    512
> -/* List of legal baudrate settings for this board */
> -#define CONFIG_SYS_BAUDRATE_TABLE      { 115200 }
>
> -/* SCIF */
> +/* Serial */
>  #define CONFIG_SCIF_CONSOLE    1
>  #define CONFIG_CONS_SCIF3      1
>
> -#define CONFIG_SYS_MEMTEST_START       RSK7264_SDRAM_BASE
> -#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + (3 * 1024 * 1024))
> -
> -#define CONFIG_SYS_SDRAM_BASE          RSK7264_SDRAM_BASE
> +/* Memory */
> +/* u-boot relocated to top 256KB of ram */
> +#define CONFIG_SYS_TEXT_BASE           0x0CFC0000
> +#define CONFIG_SYS_SDRAM_BASE          0x0C000000
>  #define CONFIG_SYS_SDRAM_SIZE          (64 * 1024 * 1024)
>
> -#define CONFIG_SYS_LOAD_ADDR           (CONFIG_SYS_SDRAM_BASE + 1024 * 1024)
> -#define CONFIG_SYS_MONITOR_BASE                RSK7264_FLASH_BASE_1
> -#define CONFIG_SYS_MONITOR_LEN         (128 * 1024)
> +#define CONFIG_SYS_MEMTEST_START       CONFIG_SYS_SDRAM_BASE
> +#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_TEXT_BASE - 0x100000)
>  #define CONFIG_SYS_MALLOC_LEN          (256 * 1024)
> -#define CONFIG_SYS_BOOTMAPSZ           (8 * 1024 * 1024)
> +#define CONFIG_SYS_MONITOR_LEN         (128 * 1024)
> +#define CONFIG_SYS_LOAD_ADDR           (CONFIG_SYS_SDRAM_BASE + 4*1024*1024)
>
> -/* FLASH */
> +/* Flash */
>  #define CONFIG_FLASH_CFI_DRIVER
>  #define CONFIG_SYS_FLASH_CFI
>  #define CONFIG_SYS_FLASH_CFI_WIDTH     FLASH_CFI_16BIT
> -#undef CONFIG_SYS_FLASH_QUIET_TEST
> -#define CONFIG_SYS_FLASH_EMPTY_INFO    /* print 'E' for empty sector on flinfo */
> -#define CONFIG_SYS_FLASH_BASE          RSK7264_FLASH_BASE_1
> -#define CONFIG_SYS_FLASH_BANKS_LIST    { CONFIG_SYS_FLASH_BASE }
> -#define CONFIG_SYS_MAX_FLASH_SECT      512
> +#define CONFIG_SYS_FLASH_BASE          0x20000000 /* Non-cached */
>  #define CONFIG_SYS_MAX_FLASH_BANKS     1
> +#define CONFIG_SYS_MAX_FLASH_SECT      512
>
> -#define CONFIG_ENV_IS_IN_FLASH
> +#define CONFIG_ENV_IS_IN_FLASH 1
> +#define CONFIG_ENV_OFFSET      (128 * 1024)
> +#define CONFIG_ENV_ADDR                (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
>  #define CONFIG_ENV_SECT_SIZE   (128 * 1024)
>  #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
> -#define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
> -#define CONFIG_SYS_FLASH_ERASE_TOUT    120000
> -#define CONFIG_SYS_FLASH_WRITE_TOUT    500
>
>  /* Board Clock */
>  #define CONFIG_SYS_CLK_FREQ    33333333
> -#define CMT_CLK_DIVIDER        32      /* 8 (default), 32, 128 or 512 */
> +#define CMT_CLK_DIVIDER                32      /* 8 (default), 32, 128 or 512 */
>  #define CONFIG_SYS_HZ          (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
>
>  /* Network interface */
>  #define CONFIG_NET_MULTI
>  #define CONFIG_SMC911X
>  #define CONFIG_SMC911X_16_BIT
> -#define CONFIG_SMC911X_BASE (0x28000000)
> +#define CONFIG_SMC911X_BASE    0x28000000
>
>  #endif /* __RSK7264_H */
> --
> 1.7.0.4
>
>



-- 
Nobuhiro Iwamatsu
   iwamatsu at {nigauri.org / debian.org}
   GPG ID: 40AD1FA6


More information about the U-Boot mailing list