[U-Boot] [PATCH v4 0/6] Add Highbank platform

Rob Herring robherring2 at gmail.com
Tue Jun 28 17:39:37 CEST 2011


From: Rob Herring <rob.herring at calxeda.com>

This series enables non-PCI AHCI controllers and adds support for Calxeda
Highbank platform which uses the AHCI changes. 

Changes from v3:
- Added Highbank to MAINTAINERS
- Added back patch to fix CONFIG_SKIP_LOWLEVEL_INIT (mistakenly dropped
from v2)

Wolfgang, Albert,

Can you apply these to your trees for v2011.09? All review comments have been
addressed.

Rob


Rob Herring (6):
  ARM: add missing CONFIG_SKIP_LOWLEVEL_INIT for armv7
  ARM: Add Calxeda Highbank platform
  arm: add __ilog2 function
  scsi/ahci: ata id little endian fix
  scsi/ahci: add support for non-PCI controllers
  ARM: highbank: Add AHCI support

 MAINTAINERS                           |    4 +
 arch/arm/cpu/armv7/highbank/Makefile  |   46 ++++++++++++
 arch/arm/cpu/armv7/highbank/config.mk |    4 +
 arch/arm/cpu/armv7/highbank/timer.c   |  124 +++++++++++++++++++++++++++++++++
 arch/arm/cpu/armv7/start.S            |    2 +
 arch/arm/include/asm/bitops.h         |    9 +++
 board/highbank/Makefile               |   49 +++++++++++++
 board/highbank/highbank.c             |   58 +++++++++++++++
 boards.cfg                            |    1 +
 common/cmd_scsi.c                     |    6 +-
 drivers/block/ahci.c                  |   72 ++++++++++++++++---
 include/ahci.h                        |    4 +
 include/configs/highbank.h            |  112 +++++++++++++++++++++++++++++
 include/scsi.h                        |    1 +
 14 files changed, 480 insertions(+), 12 deletions(-)
 create mode 100644 arch/arm/cpu/armv7/highbank/Makefile
 create mode 100644 arch/arm/cpu/armv7/highbank/config.mk
 create mode 100644 arch/arm/cpu/armv7/highbank/timer.c
 create mode 100644 board/highbank/Makefile
 create mode 100644 board/highbank/highbank.c
 create mode 100644 include/configs/highbank.h

-- 
1.7.4.1



More information about the U-Boot mailing list