[U-Boot] Pull request u-boot-blackfin.git
Mike Frysinger
vapier at gentoo.org
Wed Jun 29 04:50:54 CEST 2011
The following changes since commit b1af6f532e0d348b153d5c148369229d24af361a:
Prepare v2011.06 (2011-06-27 22:22:42 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-blackfin.git master
Harald Krapfenbauer (2):
Blackfin: cm-bf537e/cm-bf537u/tcm-bf537: update network settings
Blackfin: cm-bf537e/cm-bf537u/tcm-bf537: enable mmc_spi support
Mike Frysinger (16):
Blackfin: uart: move debug buffers into local bss
Blackfin: uart: add multiple serial support
Blackfin: adi boards: enable multi serial support by default
Blackfin: dont reset SWRST on newer bf526 parts
Blackfin: add init.elf helper code
Blackfin: uart: fix printf warning
Blackfin: post: setup default CONFIG_SYS_POST_WORD_ADDR
Blackfin: gpio: optimize free path a little
Blackfin: sync MMR read/write helpers with Linux
Blackfin: portmux: allow header to be included in assembly files
Blackfin: drop unused dma.h header from start code
Blackfin: adi boards: enable pretty flash progress output
Blackfin: split out async setup
Blackfin: serial: convert to bfin_{read,write} helpers
Blackfin: update anomaly lists to latest public info
Blackfin: adi boards: also set stderr to nc with helper
Makefile | 3 +-
arch/blackfin/cpu/.gitignore | 3 +
arch/blackfin/cpu/Makefile | 7 +-
arch/blackfin/cpu/cpu.c | 16 +-
arch/blackfin/cpu/gpio.c | 2 +
arch/blackfin/cpu/init.S | 9 +
arch/blackfin/cpu/init.lds.S | 25 +++
arch/blackfin/cpu/initcode.c | 61 ++-----
arch/blackfin/cpu/initcode.h | 71 +++++++
arch/blackfin/cpu/reset.c | 4 +-
arch/blackfin/cpu/serial.c | 234 ++++++++++++++++++------
arch/blackfin/cpu/serial.h | 60 ++++--
arch/blackfin/cpu/start.S | 1 -
arch/blackfin/include/asm/blackfin_local.h | 88 +++++-----
arch/blackfin/include/asm/config.h | 3 +
arch/blackfin/include/asm/gpio.h | 3 +-
arch/blackfin/include/asm/mach-bf506/anomaly.h | 25 ++-
arch/blackfin/include/asm/mach-bf518/anomaly.h | 28 ++-
arch/blackfin/include/asm/mach-bf527/anomaly.h | 38 +++--
arch/blackfin/include/asm/mach-bf533/anomaly.h | 23 ++-
arch/blackfin/include/asm/mach-bf537/anomaly.h | 37 +++--
arch/blackfin/include/asm/mach-bf538/anomaly.h | 42 +++--
arch/blackfin/include/asm/mach-bf548/anomaly.h | 227 +++++++++++++----------
arch/blackfin/include/asm/mach-bf561/anomaly.h | 136 ++++++++------
arch/blackfin/include/asm/portmux.h | 4 +
arch/blackfin/lib/board.c | 4 +
board/cm-bf537e/cm-bf537e.c | 34 +++--
board/cm-bf537u/cm-bf537u.c | 39 ++--
board/tcm-bf537/tcm-bf537.c | 34 +++--
common/serial.c | 3 +
include/configs/bf537-stamp.h | 1 -
include/configs/bfin_adi_common.h | 12 +-
include/configs/cm-bf537e.h | 20 ++-
include/configs/cm-bf537u.h | 24 ++-
include/configs/tcm-bf537.h | 20 ++-
include/serial.h | 9 +
36 files changed, 896 insertions(+), 454 deletions(-)
create mode 100644 arch/blackfin/cpu/init.S
create mode 100644 arch/blackfin/cpu/init.lds.S
create mode 100644 arch/blackfin/cpu/initcode.h
More information about the U-Boot
mailing list