[U-Boot] [PATCH 2/5] imx: Use correct imx25 reset.c

Wolfgang Denk wd at denx.de
Thu Jun 30 12:46:38 CEST 2011


Dear Matthias Weisser,

In message <1309427865-17531-3-git-send-email-weisserm at arcor.de> you wrote:
> imx25 used the wrong reset.c from imx27
> 
> Signed-off-by: Matthias Weisser <weisserm at arcor.de>
> ---
>  arch/arm/cpu/arm926ejs/mx25/Makefile |   19 +++++++++++++++----
>  1 files changed, 15 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/cpu/arm926ejs/mx25/Makefile b/arch/arm/cpu/arm926ejs/mx25/Makefile
> index 38d7f03..eb0e7f5 100644
> --- a/arch/arm/cpu/arm926ejs/mx25/Makefile
> +++ b/arch/arm/cpu/arm926ejs/mx25/Makefile
> @@ -24,18 +24,18 @@ include $(TOPDIR)/config.mk
>  
>  LIB	= $(obj)lib$(SOC).o
>  
> -COBJS	= generic.o timer.o
> -MX27OBJS = reset.o
> +COBJS	= generic.o timer.o reset.o
>  
>  SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
> -SRCS	+= $(addprefix $(SRCTREE)/arch/arm/cpu/arm926ejs/mx27/,$(MX27OBJS:.o=.c))
> -OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS) $(MX27OBJS))
> +OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
>  
>  all:	$(obj).depend $(LIB)
>  
>  $(LIB):	$(OBJS)
>  	$(call cmd_link_o_target, $(OBJS))
>  
> +$(OBJS) : $(TOPDIR)/include/asm/arch/asm-offsets.h
> +
>  #########################################################################
>  
>  # defines $(obj).depend target
> @@ -44,3 +44,14 @@ include $(SRCTREE)/rules.mk
>  sinclude $(obj).depend
>  
>  #########################################################################
> +
> +$(TOPDIR)/include/asm/arch/asm-offsets.h:	$(TOPDIR)/include/autoconf.mk.dep \
> +	./asm-offsets.s
> +	@echo Generating $@
> +	$(TOPDIR)/tools/scripts/make-asm-offsets ./asm-offsets.s $@
> +
> +asm-offsets.s:	$(TOPDIR)/include/autoconf.mk.dep \
> +	./asm-offsets.c
> +	$(CC) -DDO_DEPS_ONLY \
> +		$(CFLAGS) $(CFLAGS_$(BCURDIR)/$(@F)) $(CFLAGS_$(BCURDIR)) \
> +		-o $@ ./asm-offsets.c -c -S
> -- 

NAK.

See previous comments to Setano's postings.  It makes no sense to copy
identical lines into a large number of Makefiles.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Uncertain fortune is thoroughly mastered by the equity of the  calcu-
lation.                                               - Blaise Pascal


More information about the U-Boot mailing list