[U-Boot] [PATCH 2/8] Update at91sam9m10g45_devices.c to fix compile errors.

[Alex Waterman]

Move this file to the new ATMEL_BASE_* and ATMEL_ID_* defines.

Also fixed a problem appearing in the ethernet initialization where
the entire board was being reset, not just the ethernet controller.
This at least makes ethernet work on my board if the correct
environment (mac address, ip address, etc) is available on boot.

Signed-off-by: Alex Waterman <awaterman at dawning.com>
---
 .../cpu/arm926ejs/at91/at91sam9m10g45_devices.c    |   26 ++++++++++----------
 1 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c
index 4ad9b1f..9ef8966 100644
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c
@@ -26,42 +26,42 @@
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
 #include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
+#include <asm/io.h>
 
 void at91_serial0_hw_init(void)
 {
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
+	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
 
 	at91_set_a_periph(AT91_PIO_PORTB, 19, 1);	/* TXD0 */
 	at91_set_a_periph(AT91_PIO_PORTB, 18, 0);	/* RXD0 */
-	writel(1 << AT91SAM9G45_ID_US0, &pmc->pcer);
+	writel(1 << ATMEL_ID_USART0, &pmc->pcer);
 }
 
 void at91_serial1_hw_init(void)
 {
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
+	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
 
 	at91_set_a_periph(AT91_PIO_PORTB, 4, 1);		/* TXD1 */
 	at91_set_a_periph(AT91_PIO_PORTB, 5, 0);		/* RXD1 */
-	writel(1 << AT91SAM9G45_ID_US1, &pmc->pcer);
+	writel(1 << ATMEL_ID_USART1, &pmc->pcer);
 }
 
 void at91_serial2_hw_init(void)
 {
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
+	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
 
 	at91_set_a_periph(AT91_PIO_PORTD, 6, 1);		/* TXD2 */
 	at91_set_a_periph(AT91_PIO_PORTD, 7, 0);		/* RXD2 */
-	writel(1 << AT91SAM9G45_ID_US2, &pmc->pcer);
+	writel(1 << ATMEL_ID_USART2, &pmc->pcer);
 }
 
 void at91_serial3_hw_init(void)
 {
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
+	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
 
 	at91_set_a_periph(AT91_PIO_PORTB, 12, 0);	/* DRXD */
 	at91_set_a_periph(AT91_PIO_PORTB, 13, 1);	/* DTXD */
-	writel(1 << AT91_ID_SYS, &pmc->pcer);
+	writel(1 << ATMEL_ID_USART3, &pmc->pcer);
 }
 
 void at91_serial_hw_init(void)
@@ -86,14 +86,14 @@ void at91_serial_hw_init(void)
 #ifdef CONFIG_ATMEL_SPI
 void at91_spi0_hw_init(unsigned long cs_mask)
 {
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
+	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
 
 	at91_set_a_periph(AT91_PIO_PORTB, 0, 0);	/* SPI0_MISO */
 	at91_set_a_periph(AT91_PIO_PORTB, 1, 0);	/* SPI0_MOSI */
 	at91_set_a_periph(AT91_PIO_PORTB, 2, 0);	/* SPI0_SPCK */
 
 	/* Enable clock */
-	writel(1 << AT91SAM9G45_ID_SPI0, &pmc->pcer);
+	writel(1 << ATMEL_ID_SPI0, &pmc->pcer);
 
 	if (cs_mask & (1 << 0)) {
 		at91_set_a_periph(AT91_PIO_PORTB, 3, 0);
@@ -123,14 +123,14 @@ void at91_spi0_hw_init(unsigned long cs_mask)
 
 void at91_spi1_hw_init(unsigned long cs_mask)
 {
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
+	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
 
 	at91_set_a_periph(AT91_PIO_PORTB, 14, 0);	/* SPI1_MISO */
 	at91_set_a_periph(AT91_PIO_PORTB, 15, 0);	/* SPI1_MOSI */
 	at91_set_a_periph(AT91_PIO_PORTB, 16, 0);	/* SPI1_SPCK */
 
 	/* Enable clock */
-	writel(1 << AT91SAM9G45_ID_SPI1, &pmc->pcer);
+	writel(1 << ATMEL_ID_SPI1, &pmc->pcer);
 
 	if (cs_mask & (1 << 0)) {
 		at91_set_a_periph(AT91_PIO_PORTB, 17, 0);
-- 
1.7.4.4