[U-Boot] [PATCH v2] OMAP3: BeagleBoard: add xM rev B to ID table
Jason Kridner
jkridner at beagleboard.org
Thu Mar 3 18:14:48 CET 2011
From: Koen Kooi <koen at dominion.thruhere.net>
Patch was updated by Jason Kridner <jkridner at beagleboard.org>:
* Use tabs to match style of other board revisions
* Only include board revisions that exist
* Default to the same configuration as the latest revision, but
without setting 'beaglerev'
---
v2 Changes
* Updated with feedback from http://patchwork.ozlabs.org/patch/71995/
* Removed setting of mpurate based on board revision
* Set mpurate to auto in default environment variables
Cc: Koen Kooi <koen at dominion.thruhere.net>
Signed-off-by: Jason Kridner <jkridner at beagleboard.org>
---
board/ti/beagle/beagle.c | 22 +++++++++++++++++-----
board/ti/beagle/beagle.h | 3 ++-
include/configs/omap3_beagle.h | 2 +-
3 files changed, 20 insertions(+), 7 deletions(-)
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index 3884ca1..4049606 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -157,18 +157,15 @@ int misc_init_r(void)
case REVISION_AXBX:
printf("Beagle Rev Ax/Bx\n");
setenv("beaglerev", "AxBx");
- setenv("mpurate", "600");
break;
case REVISION_CX:
printf("Beagle Rev C1/C2/C3\n");
setenv("beaglerev", "Cx");
- setenv("mpurate", "600");
MUX_BEAGLE_C();
break;
case REVISION_C4:
printf("Beagle Rev C4\n");
setenv("beaglerev", "C4");
- setenv("mpurate", "720");
MUX_BEAGLE_C();
/* Set VAUX2 to 1.8V for EHCI PHY */
twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
@@ -176,10 +173,19 @@ int misc_init_r(void)
TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
TWL4030_PM_RECEIVER_DEV_GRP_P1);
break;
- case REVISION_XM:
+ case REVISION_XM_A:
printf("Beagle xM Rev A\n");
setenv("beaglerev", "xMA");
- setenv("mpurate", "1000");
+ MUX_BEAGLE_XM();
+ /* Set VAUX2 to 1.8V for EHCI PHY */
+ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
+ TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
+ TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
+ TWL4030_PM_RECEIVER_DEV_GRP_P1);
+ break;
+ case REVISION_XM_B:
+ printf("Beagle xM Rev B\n");
+ setenv("beaglerev", "xMB");
MUX_BEAGLE_XM();
/* Set VAUX2 to 1.8V for EHCI PHY */
twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
@@ -189,6 +195,12 @@ int misc_init_r(void)
break;
default:
printf("Beagle unknown 0x%02x\n", get_board_revision());
+ MUX_BEAGLE_XM();
+ /* Set VAUX2 to 1.8V for EHCI PHY */
+ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
+ TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
+ TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
+ TWL4030_PM_RECEIVER_DEV_GRP_P1);
}
switch (get_expansion_id()) {
diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h
index b22b653..b0e26e5 100644
--- a/board/ti/beagle/beagle.h
+++ b/board/ti/beagle/beagle.h
@@ -37,7 +37,8 @@ const omap3_sysinfo sysinfo = {
#define REVISION_AXBX 0x7
#define REVISION_CX 0x6
#define REVISION_C4 0x5
-#define REVISION_XM 0x0
+#define REVISION_XM_A 0x0
+#define REVISION_XM_B 0x1
/*
* IEN - Input Enable
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index c85537c..51e14d0 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -190,7 +190,7 @@
"loadaddr=0x82000000\0" \
"usbtty=cdc_acm\0" \
"console=ttyS2,115200n8\0" \
- "mpurate=500\0" \
+ "mpurate=auto\0" \
"vram=12M\0" \
"dvimode=1024x768MR-16 at 60\0" \
"defaultdisplay=dvi\0" \
--
1.5.6.4
More information about the U-Boot
mailing list