[U-Boot] MPC837x PCIe no link

[Baidu Liu]

2011/3/5 Andre Schwarz <andre.schwarz at matrix-vision.de>

> All,
>
> sorry to bother you again.
> After my harddisk died I'm porting my latest 8377 work to TOT.
> Unfortunately I'm lacking some commits that haven't been pushed to backup.
>
>
> But everything's fine so far and the system is up and running, except PCIe.
>
> Using the "old" binary left on the server PCIe has been working fine :
>
> U-Boot 2010.12-rc1-00596-gcef659f-dirty (Nov 22 2010 - 17:22:20) MPC83XX
> ...
> PCIE1: link
>
> and the Wifi card is present and usable by Linux.
>
> => pci 2
> Scanning PCI devices on bus 2
> BusDevFun  VendorId   DeviceId   Device Class       Sub-Class
> _____________________________________________________________
> 02.00.00   0x168c     0x001c     Network controller      0x00
>
>
>
> With latest code running on the *same piece of hardware*
>
> U-Boot 2011.03-rc1-00129-g1ce1ed1-dirty (Mar 04 2011 - 16:31:40) MPC83XX
>
> I get "PCIE1: No link"
>
>
> Dumping SerDes (e3000 + e3100) and PCIe core (400-7ff) registers shows
> now difference between both versions.
>
> Any ideas what might be responsible for the link not being established ?
>
>
> the link is the physical status of the pcie. So please to check the setting
about the pcie. Such as x1/x2，clock，serdes setting in
functiono pci_init_board().