[U-Boot] [PATCH] powerpc/85xx: don't init SDRAM when CONFIG_SYS_RAMBOOT
Kumar Gala
galak at kernel.crashing.org
Mon Mar 7 05:17:00 CET 2011
From: Zhao Chenhui <b35336 at freescale.com>
Signed-off-by: Zhao Chenhui <b35336 at freescale.com>
Acked-by: Li Yang <leoli at freescale.com>
Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
---
arch/powerpc/cpu/mpc85xx/cpu.c | 11 +++++++++++
arch/powerpc/include/asm/fsl_ddr_sdram.h | 1 +
2 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index 49ea6cc..f5b39c0 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -299,6 +299,16 @@ void mpc85xx_reginfo(void)
/* Common ddr init for non-corenet fsl 85xx platforms */
#ifndef CONFIG_FSL_CORENET
+#if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SYS_INIT_L2_ADDR)
+phys_size_t initdram(int board_type)
+{
+#if defined(CONFIG_SPD_EEPROM) || defined(CONFIG_DDR_SPD)
+ return fsl_ddr_sdram_size();
+#else
+ return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
+#endif
+}
+#else /* CONFIG_SYS_RAMBOOT */
phys_size_t initdram(int board_type)
{
phys_size_t dram_size = 0;
@@ -348,6 +358,7 @@ phys_size_t initdram(int board_type)
puts("DDR: ");
return dram_size;
}
+#endif /* CONFIG_SYS_RAMBOOT */
#endif
#if CONFIG_POST & CONFIG_SYS_POST_MEMORY
diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h
index 99dddb4..127a840 100644
--- a/arch/powerpc/include/asm/fsl_ddr_sdram.h
+++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h
@@ -271,6 +271,7 @@ typedef struct memctl_options_s {
} memctl_options_t;
extern phys_size_t fsl_ddr_sdram(void);
+extern phys_size_t fsl_ddr_sdram_size(void);
extern int fsl_use_spd(void);
extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
unsigned int ctrl_num);
--
1.7.2.3
More information about the U-Boot
mailing list