[U-Boot] [PATCH 14/20] arm, keymile: updates for the arm based boards from keymile
Heiko Schocher
hs at denx.de
Tue Mar 8 14:30:12 CET 2011
define KM_IVM_BUS and KM_ENV_BUS macros
KM_IVM_BUS is used to define the EEprom_ivm environment variable.
These macros allow the reuse of these I2C addresses in other code
locations.
remove unneeded code
On first HW versions the BOCO FPGA was behind a MUX device. These
HW versions are not supported anymore. And therefore this code can
be removed.
added LED initialization for SUEN3
The bootstat LED required to be initialized so to have a green
colour after start-up.
define CONFIG_SYS_TEXT_BASE
This is needed by the relocation code and is not the same for
our ARM BEC and thus needs to be defined.
remove memsize variable
An environment variable for memsize is not needed.
this can be get via the board info struct.
remove unneeded double access to bi_dram[i].size field
Signed-off-by: Valentin Longchamp <valentin.longchamp at keymile.com>
Signed-off-by: Holger Brunck <holger.brunck at keymile.com>
Signed-off-by: Luca Haab <luca.haab at keymile.com>
Signed-off-by: Heiko Schocher <hs at denx.de>
cc: Prafulla Wadaskar <prafulla at marvell.com>
---
board/keymile/km_arm/km_arm.c | 37 +++++++++++++++++++++++++++++--------
include/configs/km_arm.h | 1 +
include/configs/mgcoge2un.h | 6 ++++--
include/configs/suen3.h | 6 ++++--
include/configs/suen8.h | 6 ++++--
5 files changed, 42 insertions(+), 14 deletions(-)
diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c
index 48a10c5..3dc63ea 100644
--- a/board/keymile/km_arm/km_arm.c
+++ b/board/keymile/km_arm/km_arm.c
@@ -41,9 +41,6 @@
DECLARE_GLOBAL_DATA_PTR;
-static int io_dev;
-extern I2C_MUX_DEVICE *i2c_mux_ident_muxstring (uchar *buf);
-
/* Multi-Purpose Pins Functionality configuration */
u32 kwmpp_config[] = {
MPP0_NF_IO2,
@@ -120,15 +117,37 @@ int ethernet_present(void)
return ret;
}
+int initialize_unit_leds(void)
+{
+ /* init the unit LEDs */
+ /* per default they all are */
+ /* ok apart from bootstat */
+ /* LED connected through BOCO */
+ /* BOCO lies at the address 0x10 */
+ /* LEDs are in the block CTRL_H (addr 0x02) */
+ /* BOOTSTAT LED is the first 0x01 */
+ #define BOCO 0x10
+ #define CTRL_H 0x02
+ #define APPLEDMASK 0x01
+ uchar buf;
+
+ if (i2c_read(BOCO, CTRL_H, 1, &buf, 1) != 0) {
+ printf("%s: Error reading Boco\n", __FUNCTION__);
+ return -1;
+ }
+ buf |= APPLEDMASK;
+ if (i2c_write(BOCO, CTRL_H, 1, &buf, 1) != 0) {
+ printf("%s: Error writing Boco\n", __FUNCTION__);
+ return -1;
+ }
+ return 0;
+}
+
int misc_init_r(void)
{
- I2C_MUX_DEVICE *i2cdev;
char *str;
int mach_type;
- /* add I2C Bus for I/O Expander */
- i2cdev = i2c_mux_ident_muxstring((uchar *)"pca9554a:70:a");
- io_dev = i2cdev->busid;
puts("Piggy:");
if (ethernet_present() == 0)
puts (" not");
@@ -140,6 +159,9 @@ int misc_init_r(void)
printf("Overwriting MACH_TYPE with %d!!!\n", mach_type);
gd->bd->bi_arch_number = mach_type;
}
+
+ initialize_unit_leds();
+
return 0;
}
@@ -246,7 +268,6 @@ void dram_init_banksize(void)
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
gd->bd->bi_dram[i].start = kw_sdram_bar(i);
- gd->bd->bi_dram[i].size = kw_sdram_bs(i);
gd->bd->bi_dram[i].size = get_ram_size((long *)kw_sdram_bar(i),
kw_sdram_bs(i));
}
diff --git a/include/configs/km_arm.h b/include/configs/km_arm.h
index 2c13cae..578438e 100644
--- a/include/configs/km_arm.h
+++ b/include/configs/km_arm.h
@@ -46,6 +46,7 @@
/* include common defines/options for all Keymile boards */
#include "keymile-common.h"
+#define CONFIG_SYS_TEXT_BASE 0x04000000 /* code address after reloc */
#define CONFIG_ENV_SIZE (128 << 10) /* NAND chip block size */
#define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */
#define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */
diff --git a/include/configs/mgcoge2un.h b/include/configs/mgcoge2un.h
index 1f2b23f..3dc4665 100644
--- a/include/configs/mgcoge2un.h
+++ b/include/configs/mgcoge2un.h
@@ -41,12 +41,14 @@
#define CONFIG_HOSTNAME mgcoge2un
+#define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/
+#define KM_ENV_BUS "pca9547:70:d" /* I2C2 (Mux-Port 5)*/
+
/*
* Default environment variables
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
CONFIG_KM_DEF_ENV \
- "memsize=0x8000000\0" \
"newenv=setenv addr 0x100000 && " \
"i2c dev 1; mw.b ${addr} 0 4 && " \
"eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \
@@ -54,7 +56,7 @@
"eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \
" ${addr} " xstr(CONFIG_ENV_OFFSET_REDUND) " 4\0" \
"rootpath=/opt/eldk/arm\0" \
- "EEprom_ivm=pca9547:70:9\0" \
+ "EEprom_ivm=" KM_IVM_BUS "\0" \
""
#endif /* _CONFIG_MGCOGE2UN_H */
diff --git a/include/configs/suen3.h b/include/configs/suen3.h
index 87f524a..2b6f19e 100644
--- a/include/configs/suen3.h
+++ b/include/configs/suen3.h
@@ -43,12 +43,14 @@
#define CONFIG_HOSTNAME suen3
+#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/
+#define KM_ENV_BUS "pca9544a:70:d" /* I2C2 (Mux-Port 5)*/
+
/*
* Default environment variables
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
CONFIG_KM_DEF_ENV \
- "memsize=0x8000000\0" \
"newenv=setenv addr 0x100000 && " \
"i2c dev 1; mw.b ${addr} 0 4 && " \
"eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \
@@ -56,7 +58,7 @@
"eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \
" ${addr} " xstr(CONFIG_ENV_OFFSET_REDUND) " 4\0" \
"rootpath=/opt/eldk/arm\0" \
- "EEprom_ivm=pca9544a:70:9\0" \
+ "EEprom_ivm=" KM_IVM_BUS "\0" \
""
#endif /* _CONFIG_SUEN3_H */
diff --git a/include/configs/suen8.h b/include/configs/suen8.h
index 2f25b74..4149137 100644
--- a/include/configs/suen8.h
+++ b/include/configs/suen8.h
@@ -40,12 +40,14 @@
#define CONFIG_HOSTNAME suen8
+#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/
+#define KM_ENV_BUS "pca9544a:70:d" /* I2C2 (Mux-Port 5)*/
+
/*
* Default environment variables
*/
#define CONFIG_EXTRA_ENV_SETTINGS \
CONFIG_KM_DEF_ENV \
- "memsize=0x8000000\0" \
"newenv=setenv addr 0x100000 && " \
"i2c dev 1; mw.b ${addr} 0 4 && " \
"eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \
@@ -53,7 +55,7 @@
"eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \
" ${addr} " xstr(CONFIG_ENV_OFFSET_REDUND) " 4\0" \
"rootpath=/opt/eldk/arm\0" \
- "EEprom_ivm=pca9544a:70:9\0" \
+ "EEprom_ivm=" KM_IVM_BUS "\0" \
""
#endif /* _CONFIG_SUEN8_H */
--
1.7.4
More information about the U-Boot
mailing list