[U-Boot] [PATCH 17/22] omap4: calculate EMIF register values

[John Rigby]

On Mon, Feb 28, 2011 at 4:46 AM, Aneesh V <aneesh at ti.com> wrote:
> Calculate EMIF register values based on AC timing parameters
> from the SDRAM datasheet and the DDR frequency rather than
> using the hard-coded values.
>
> For a new board the user doen't have to go through the tedious
> process of calculating the register values. Instead, just
> provide the AC timings from the device data sheet as input
> and the driver will automatically calculate the register values.
>
> Signed-off-by: Aneesh V <aneesh at ti.com>
> ---


I get some warnings from arch/arm/cpu/armv7/omap4/emif.c:
emif.c: In function ‘sdram_init’:
emif.c:1164:43: warning: ‘section_map’ may be used uninitialized in
this function
emif.c:1166:27: warning: ‘lis_map_regs_calculated$dmm_lisa_map_3’ may
be used uninitialized in this function
emif.c: In function ‘sdram_init’:
emif.c:1166:27: warning: ‘lis_map_regs_calculated$dmm_lisa_map_3’ may
be used uninitialized in this function

Looking at the code I see that these are initialized but the compiler
can't firgure that out.

John