[U-Boot] [RFC 3/3][v4] mmc: trace added

[Raffaele Recalcati]

From: Raffaele Recalcati <raffaele.recalcati at bticino.it>

Defining CONFIG_MMC_TRACE in the include board file it is possible to activate
a tracing support.
This code helps in case of eMMC hw failure or to investigate possible eMMC
initialization issues.

Signed-off-by: Raffaele Recalcati <raffaele.recalcati at bticino.it>
---
 drivers/mmc/mmc.c |   57 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 57 insertions(+), 0 deletions(-)

diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 5bea476..3395d7c 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -45,7 +45,60 @@ int board_mmc_getcd(u8 *cd, struct mmc *mmc)__attribute__((weak,
 
 int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
 {
+#ifdef CONFIG_MMC_TRACE
+	int ret;
+	int i;
+	u8 *ptr;
+
+	printf("CMD_SEND:%d\n", cmd->cmdidx);
+	printf("\t\tARG\t\t\t 0x%08X\n", cmd->cmdarg);
+	printf("\t\tFLAG\t\t\t %d\n", cmd->flags);
+	ret = mmc->send_cmd(mmc, cmd, data);
+	switch (cmd->resp_type) {
+		case MMC_RSP_NONE:
+			printf("\t\tMMC_RSP_NONE\n");
+			break;
+		case MMC_RSP_R1:
+			printf("\t\tMMC_RSP_R1,5,6,7 \t 0x%08X \n",
+				cmd->response[0]);
+			break;
+		case MMC_RSP_R1b:
+			printf("\t\tMMC_RSP_R1b\t\t 0x%08X \n",
+				cmd->response[0]);
+			break;
+		case MMC_RSP_R2:
+			printf("\t\tMMC_RSP_R2\t\t 0x%08X \n",
+				cmd->response[0]);
+			printf("\t\t          \t\t 0x%08X \n",
+				cmd->response[1]);
+			printf("\t\t          \t\t 0x%08X \n",
+				cmd->response[2]);
+			printf("\t\t          \t\t 0x%08X \n",
+				cmd->response[3]);
+			printf("\n");
+			printf("\t\t\t\t\tDUMPING DATA\n");
+			for (i = 0; i < 4; i++) {
+				int j;
+				printf("\t\t\t\t\t%03d - ", i*4);
+				ptr = &cmd->response[i];
+				ptr += 3;
+				for (j = 0; j < 4; j++)
+					printf("%02X ", *ptr--);
+				printf("\n");
+			}
+			break;
+		case MMC_RSP_R3:
+			printf("\t\tMMC_RSP_R3,4\t\t 0x%08X \n",
+				cmd->response[0]);
+			break;
+		default:
+			printf("\t\tERROR MMC rsp not supported\n");
+			break;
+	}
+	return ret;
+#else
 	return mmc->send_cmd(mmc, cmd, data);
+#endif
 }
 
 int mmc_send_status(struct mmc *mmc, int timeout)
@@ -74,6 +127,10 @@ int mmc_send_status(struct mmc *mmc, int timeout)
 		}
 	} while (timeout--);
 
+#ifdef CONFIG_MMC_TRACE
+	status = (cmd.response[0] & MMC_STATUS_CURR_STATE) >> 9;
+	printf("CURR STATE:%d\n", status);
+#endif
 	if (!timeout) {
 		printf("Timeout waiting card ready\n");
 		return TIMEOUT;
-- 
1.7.0.4