[U-Boot] [PATCH 5/8] I2C: add i2c support for Armada100 platform

[Lei Wen]

Signed-off-by: Lei Wen <leiwen at marvell.com>
---
 arch/arm/cpu/arm926ejs/armada100/cpu.c    |   14 ++++++++++++++
 arch/arm/include/asm/arch-armada100/mfp.h |    4 ++++
 board/Marvell/aspenite/aspenite.c         |    5 +++++
 include/configs/aspenite.h                |   12 ++++++++++++
 4 files changed, 35 insertions(+), 0 deletions(-)

diff --git a/arch/arm/cpu/arm926ejs/armada100/cpu.c b/arch/arm/cpu/arm926ejs/armada100/cpu.c
index 62aa175..8039ad2 100644
--- a/arch/arm/cpu/arm926ejs/armada100/cpu.c
+++ b/arch/arm/cpu/arm926ejs/armada100/cpu.c
@@ -62,6 +62,14 @@ int arch_cpu_init(void)
 	/* Enable GPIO clock */
 	writel(APBC_APBCLK, &apb1clkres->gpio);
 
+	/* Enable general I2C clock */
+	writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi0);
+	writel(APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi0);
+
+	/* Enable power I2C clock */
+	writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi1);
+	writel(APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi1);
+
 	/*
 	 * Enable Functional and APB clock at 14.7456MHz
 	 * for configured UART console
@@ -90,3 +98,9 @@ int print_cpuinfo(void)
 	return 0;
 }
 #endif
+
+#ifdef CONFIG_PXA_I2C
+void i2c_clk_enable (void)
+{
+}
+#endif
diff --git a/arch/arm/include/asm/arch-armada100/mfp.h b/arch/arm/include/asm/arch-armada100/mfp.h
index d21a79f..f22b5e7 100644
--- a/arch/arm/include/asm/arch-armada100/mfp.h
+++ b/arch/arm/include/asm/arch-armada100/mfp.h
@@ -60,6 +60,10 @@
 #define MFPO8_UART3_RXD		MFP_REG(0x06c) | MFP_AF2 | MFP_DRIVE_MEDIUM
 #define MFPO9_UART3_TXD		MFP_REG(0x070) | MFP_AF2 | MFP_DRIVE_MEDIUM
 
+/* I2c */
+#define MFP105_CI2C_SDA		MFP_REG(0x1a4) | MFP_AF1 | MFP_DRIVE_MEDIUM
+#define MFP106_CI2C_SCL		MFP_REG(0x1a8) | MFP_AF1 | MFP_DRIVE_MEDIUM
+
 /* More macros can be defined here... */
 
 #define MFP_PIN_MAX	117
diff --git a/board/Marvell/aspenite/aspenite.c b/board/Marvell/aspenite/aspenite.c
index 046ffd6..34ac7aa 100644
--- a/board/Marvell/aspenite/aspenite.c
+++ b/board/Marvell/aspenite/aspenite.c
@@ -33,9 +33,14 @@ DECLARE_GLOBAL_DATA_PTR;
 int board_early_init_f(void)
 {
 	u32 mfp_cfg[] = {
+		/* I2C */
+		MFP105_CI2C_SDA,
+		MFP106_CI2C_SCL,
+
 		/* Enable Console on UART1 */
 		MFP107_UART1_RXD,
 		MFP108_UART1_TXD,
+
 		MFP_EOC		/*End of configureation*/
 	};
 	/* configure MFP's */
diff --git a/include/configs/aspenite.h b/include/configs/aspenite.h
index fd35f3e..50f8ed7 100644
--- a/include/configs/aspenite.h
+++ b/include/configs/aspenite.h
@@ -63,6 +63,18 @@
 #undef CONFIG_ARCH_MISC_INIT
 
 /*
+ * I2C definition
+ */
+#define CONFIG_CMD_I2C		1
+#define CONFIG_PXA_I2C		1
+#define CONFIG_PXA_I2C_NUM	2
+#define CONFIG_I2C_MULTI_BUS	1
+#define CONFIG_PXA_I2C_REG	{0xd4011000, 0xd4025000}
+#define CONFIG_HARD_I2C		1
+#define CONFIG_SYS_I2C_SPEED	0
+#define CONFIG_SYS_I2C_SLAVE	0xfe
+
+/*
  * Environment variables configurations
  */
 #define CONFIG_ENV_IS_NOWHERE	1	/* if env in SDRAM */
-- 
1.7.0.4