[U-Boot] Please pull u-boot-mpc85xx.git

Wolfgang Denk wd at denx.de
Mon Mar 14 20:29:01 CET 2011


Dear Kumar Gala,

In message <alpine.LFD.2.00.1103140036490.3551 at right.am.freescale.net> you wrote:
> A few fixes for v2011.03 release.
> 
> The following changes since commit c7977858dcf1f656cbe91ea0dc3cb9139c6a8cc8:
> 
>   ARM: Update mach-types (2011-02-21 08:30:55 +0100)
> 
> are available in the git repository at:
>   git://git.denx.de/u-boot-mpc85xx.git master
> 
> Ed Swarthout (1):
>       powerpc/85xx: Fix plat_mp_up() disabling of BPTR for CoreNet Platforms
> 
> John Schmoller (1):
>       mpc8[5/6]xx: Ensure POST word does not get reset
> 
> Kumar Gala (1):
>       fsl_law: Fix LAW printing function
> 
> Matthew McClintock (1):
>       powerpc/85xx: Fix pixis_reset altbank mask on MPC8536DS
> 
> Priyanka Jain (1):
>       fsl_esdhc: Correcting esdhc timeout counter calculation
> 
> York Sun (3):
>       powerpc/mpc8xxx: Fix DDR3 timing_cfg_1 and sdram_mode registers
>       corenet_ds: pick the middle value for all tested timing parameters
>       powerpc/corenet_ds: revise platform dependent parameters
> 
>  arch/powerpc/cpu/mpc85xx/interrupts.c    |   16 ++++++++
>  arch/powerpc/cpu/mpc85xx/mp.c            |    4 +-
>  arch/powerpc/cpu/mpc86xx/interrupts.c    |   16 ++++++++
>  arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c |   20 +++++++---
>  board/freescale/corenet_ds/ddr.c         |   58 +++++++++--------------------
>  drivers/misc/fsl_law.c                   |    2 +-
>  drivers/mmc/fsl_esdhc.c                  |   16 ++++++++-
>  include/configs/MPC8536DS.h              |    2 +-
>  8 files changed, 83 insertions(+), 51 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"It takes all sorts of in & out-door schooling to get adapted  to  my
kind of fooling"                                           - R. Frost


More information about the U-Boot mailing list