[U-Boot] [PATCHv2] fsl_ddr: Don't use full 64-bit divides on 32-bit PowerPC

[York Sun]

On Wed, 2011-02-23 at 11:35 -0500, Kyle Moffett wrote:
> The current FreeScale MPC-8xxx DDR SPD interpreter is using full 64-bit
> integer divide operations to convert between nanoseconds and DDR clock
> cycles given arbitrary DDR clock frequencies.
> 
> Since all of the inputs to this are 32-bit (nanoseconds, clock cycles,
> and DDR frequencies), we can easily restructure the computation to use
> the "do_div()" function to perform 64-bit/32-bit divide operations.
> 
> This decreases compute time rather significantly for each conversion and
> avoids bringing in a very complicated function from libgcc.
> 
> It should be noted that nothing else in U-Boot or the Linux kernel seems
> to require a full 64-bit divide on any 32-bit PowerPC.
> 
> Build-and-boot-tested on the HWW-1U-1A board using DDR2 SPD detection.
> 
> Signed-off-by: Kyle Moffett <Kyle.D.Moffett at boeing.com>
> Cc: Andy Fleming <afleming at gmail.com>
> Cc: Kumar Gala <kumar.gala at freescale.com>
> Cc: Wolfgang Denk <wd at denx.de>
> Cc: Kim Phillips <kim.phillips at freescale.com>
> ---

Acked-by: York Sun <yorksun at freescale.com>