[U-Boot] [PATCH v2 06/21] mpc832x: add support for mpc8321 based tuda1 board
Heiko Schocher
hs at denx.de
Tue Mar 15 10:03:49 CET 2011
This board is similar to suvd3 board. So most initialisation topics
are taken from suvd3 (UART1, Ethernet, piggy PHY, flash, ram) only the
application specific chip selects differ.
Signed-off-by: Lukas Roggli <lukas.roggli at keymile.com>
Signed-off-by: Holger Brunck <holger.brunck at keymile.com>
Signed-off-by: Heiko Schocher <hs at denx.de>
cc: Kim Phillips <kim.phillips at freescale.com>
cc: Valentin Longchamp <valentin.longchamp at keymile.com>
---
changes for v2:
- fix checkpatch.pl errors and warnings
MAINTAINERS | 1 +
boards.cfg | 1 +
include/configs/tuda1.h | 249 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 251 insertions(+), 0 deletions(-)
create mode 100644 include/configs/tuda1.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 801e4dd..cbc34af 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -434,6 +434,7 @@ Heiko Schocher <hs at denx.de>
sc3 PPC405GP
suen3 ARM926EJS (Kirkwood SoC)
suvd3 MPC8321
+ tuda1 MPC8321
tuxa1 MPC8321
uc101 MPC5200
ve8313 MPC8313
diff --git a/boards.cfg b/boards.cfg
index ed5e0e7..b3a4e9e 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -476,6 +476,7 @@ SIMPC8313_LP powerpc mpc83xx simpc8313 sheldon
SIMPC8313_SP powerpc mpc83xx simpc8313 sheldon - SIMPC8313:NAND_SP
suvd3 powerpc mpc83xx km83xx keymile
TQM834x powerpc mpc83xx tqm834x tqc
+tuda1 powerpc mpc83xx km83xx keymile
tuxa1 powerpc mpc83xx km83xx keymile
sbc8540 powerpc mpc85xx sbc8560 - - SBC8540
sbc8540_33 powerpc mpc85xx sbc8560 - - SBC8540
diff --git a/include/configs/tuda1.h b/include/configs/tuda1.h
new file mode 100644
index 0000000..a50a87d
--- /dev/null
+++ b/include/configs/tuda1.h
@@ -0,0 +1,249 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ * Dave Liu <daveliu at freescale.com>
+ *
+ * Copyright (C) 2007 Logic Product Development, Inc.
+ * Peter Barada <peterb at logicpd.com>
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ * Anton Vorontsov <avorontsov at ru.mvista.com>
+ *
+ * (C) Copyright 2008
+ * Heiko Schocher, DENX Software Engineering, hs at denx.de.
+ *
+ * (C) Copyright 2010-2011
+ * Lukas Roggli, KEYMILE Ltd, lukas.roggli at keymile.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_QE /* Has QE */
+#define CONFIG_MPC832x /* MPC832x CPU specific */
+#define CONFIG_TUDA1 /* TUDA1 board specific */
+#define CONFIG_HOSTNAME tuda1
+#define CONFIG_KM_BOARD_NAME "tuda1"
+
+#define CONFIG_SYS_TEXT_BASE 0xF0000000
+#define CONFIG_KM_DEF_NETDEV \
+ "netdev=eth0\0"
+
+#define CONFIG_KM_DEF_ROOTPATH \
+ "rootpath=/opt/eldk/ppc_8xx\0"
+
+/* include common defines/options for all 83xx Keymile boards */
+#include "km83xx-common.h"
+
+#define CONFIG_MISC_INIT_R
+
+/*
+ * System IO Config
+ */
+#define CONFIG_SYS_SICRH 0x00000006
+#define CONFIG_SYS_SICRL SICRL_IRQ_CKS
+
+/*
+ * Hardware Reset Configuration Word
+ */
+#define CONFIG_SYS_HRCW_LOW (\
+ HRCWL_LCL_BUS_TO_SCB_CLK_1X1 | \
+ HRCWL_DDR_TO_SCB_CLK_2X1 | \
+ HRCWL_CSB_TO_CLKIN_2X1 | \
+ HRCWL_CORE_TO_CSB_2_5X1 | \
+ HRCWL_CE_PLL_VCO_DIV_2 | \
+ HRCWL_CE_TO_PLL_1X3)
+
+#define CONFIG_SYS_HRCW_HIGH (\
+ HRCWH_PCI_AGENT | \
+ HRCWH_PCI_ARBITER_DISABLE | \
+ HRCWH_CORE_ENABLE | \
+ HRCWH_FROM_0X00000100 | \
+ HRCWH_BOOTSEQ_DISABLE | \
+ HRCWH_SW_WATCHDOG_DISABLE | \
+ HRCWH_ROM_LOC_LOCAL_16BIT | \
+ HRCWH_BIG_ENDIAN | \
+ HRCWH_LALE_NORMAL)
+
+#define CONFIG_SYS_DDR_CS0_BNDS 0x0000007f
+#define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SDRAM_TYPE_DDR2 | \
+ SDRAM_CFG_32_BE | \
+ SDRAM_CFG_2T_EN | \
+ SDRAM_CFG_SREN)
+
+#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000
+#define CONFIG_SYS_DDR_CLK_CNTL (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
+#define CONFIG_SYS_DDR_INTERVAL ((0x064 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \
+ (0x200 << SDRAM_INTERVAL_REFINT_SHIFT))
+
+#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \
+ CSCONFIG_ODT_WR_CFG | \
+ CSCONFIG_ROW_BIT_13 | \
+ CSCONFIG_COL_BIT_10)
+
+#define CONFIG_SYS_DDR_MODE 0x47860252
+#define CONFIG_SYS_DDR_MODE2 0x8080c000
+
+#define CONFIG_SYS_DDR_TIMING_0 ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \
+ (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
+ (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \
+ (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \
+ (0 << TIMING_CFG0_WWT_SHIFT) | \
+ (0 << TIMING_CFG0_RRT_SHIFT) | \
+ (0 << TIMING_CFG0_WRT_SHIFT) | \
+ (0 << TIMING_CFG0_RWT_SHIFT))
+
+#define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_50) | \
+ (2 << TIMING_CFG1_WRTORD_SHIFT) | \
+ (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
+ (2 << TIMING_CFG1_WRREC_SHIFT) | \
+ (6 << TIMING_CFG1_REFREC_SHIFT) | \
+ (2 << TIMING_CFG1_ACTTORW_SHIFT) | \
+ (6 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
+ (2 << TIMING_CFG1_PRETOACT_SHIFT))
+
+#define CONFIG_SYS_DDR_TIMING_2 ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \
+ (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \
+ (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \
+ (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \
+ (4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \
+ (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \
+ (5 << TIMING_CFG2_CPO_SHIFT))
+
+#define CONFIG_SYS_DDR_TIMING_3 0x00000000
+
+
+#define CONFIG_SYS_PIGGY_BASE 0xE8000000
+#define CONFIG_SYS_PIGGY_SIZE 128
+#define CONFIG_SYS_APP1_BASE 0xA0000000 /* PAXG */
+#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */
+#define CONFIG_SYS_APP2_BASE 0xB0000000 /* PINC3 */
+#define CONFIG_SYS_APP2_SIZE 256 /* Megabytes */
+
+
+/* EEprom support */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_EADC_1 | LCRR_CLKDIV_2)
+#define CONFIG_SYS_LBC_LBCR 0x00000000
+
+/*
+ * Init Local Bus Memory Controller:
+ *
+ * Bank Bus Machine PortSz Size Device
+ * ---- --- ------- ------ ----- ------
+ * 2 Local GPCM 8 bit 256MB PAXG
+ * 3 Local GPCM 8 bit 256MB PINC3
+ *
+ */
+
+/*
+ * PAXG on the local bus CS2
+ */
+/* Window base at flash base */
+#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_APP1_BASE
+/* Window size: 256 MB */
+#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_256MB)
+
+#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \
+ BR_PS_8 | \
+ BR_MS_GPCM | \
+ BR_V)
+
+#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_APP1_SIZE) | \
+ OR_GPCM_CSNT | \
+ OR_GPCM_ACS_DIV4 | \
+ OR_GPCM_SCY_2 | \
+ (OR_GPCM_TRLX & \
+ (~OR_GPCM_EHTR)) | /* EHTR = 0 */ \
+ OR_GPCM_EAD)
+/*
+ * PINC3 on the local bus CS3
+ */
+/* Access window base at PINC3 base */
+#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_APP2_BASE
+/* Window size: 256 MB */
+#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB)
+
+#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \
+ BR_PS_8 | \
+ BR_MS_GPCM | \
+ BR_V)
+
+#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \
+ OR_GPCM_CSNT | \
+ (OR_GPCM_ACS_DIV2 & /* ACS = 11 */\
+ (~OR_GPCM_XACS)) | /* XACS = 0 */\
+ (OR_GPCM_SCY_2 & \
+ (~OR_GPCM_EHTR)) | /* EHTR = 0 */ \
+ OR_GPCM_TRLX)
+
+#define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \
+ 0x0000c000 | \
+ MxMR_WLFx_2X)
+
+/*
+ * MMU Setup
+ */
+/* PAXG: icache cacheable, but dcache-inhibit and guarded */
+#define CONFIG_SYS_IBAT5L (CONFIG_SYS_APP1_BASE | \
+ BATL_PP_10 | \
+ BATL_MEMCOHERENCE)
+/* 512M should also include APP2... */
+#define CONFIG_SYS_IBAT5U (CONFIG_SYS_APP1_BASE | \
+ BATU_BL_256M | \
+ BATU_VS | \
+ BATU_VP)
+#define CONFIG_SYS_DBAT5L (CONFIG_SYS_APP1_BASE | \
+ BATL_PP_10 | \
+ BATL_CACHEINHIBIT | \
+ BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
+
+#ifdef CONFIG_PCI
+/* PCI MEM space: cacheable */
+#define CFG_IBAT6L (CFG_PCI1_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT6U (CFG_PCI1_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT6L CFG_IBAT6L
+#define CFG_DBAT6U CFG_IBAT6U
+/* PCI MMIO space: cache-inhibit and guarded */
+#define CFG_IBAT7L (CFG_PCI1_MMIO_PHYS | \
+ BATL_PP_10 | \
+ BATL_CACHEINHIBIT | \
+ BATL_GUARDEDSTORAGE)
+#define CFG_IBAT7U (CFG_PCI1_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT7L CFG_IBAT7L
+#define CFG_DBAT7U CFG_IBAT7U
+#else /* CONFIG_PCI */
+
+/* PINC3: icache cacheable, but dcache-inhibit and guarded */
+#define CONFIG_SYS_IBAT6L (CONFIG_SYS_APP2_BASE | \
+ BATL_PP_10 | \
+ BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT6U (CONFIG_SYS_APP2_BASE | \
+ BATU_BL_256M | \
+ BATU_VS | \
+ BATU_VP)
+#define CONFIG_SYS_DBAT6L (CONFIG_SYS_APP2_BASE | \
+ BATL_PP_10 | \
+ BATL_CACHEINHIBIT | \
+ BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
+
+#define CONFIG_SYS_IBAT7L (0)
+#define CONFIG_SYS_IBAT7U (0)
+#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
+#endif /* CONFIG_PCI */
+
+#endif /* __CONFIG_H */
--
1.7.4
More information about the U-Boot
mailing list