[U-Boot] Non-working Relocated DNS323 config

[Prafulla Wadaskar]

> -----Original Message-----
> From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de]
> On Behalf Of rogan at dawes.za.net
> Sent: Friday, March 18, 2011 1:40 PM
> To: u-boot at lists.denx.de
> Subject: [U-Boot] Non-working Relocated DNS323 config
> 
> This patch series contains the previous working configuration for
> the DNS323, forward-ported to mainline, taking into account changes
> made to the EDMiniV2 configuration on which this is based.
> 
> Unfortunately, this does not boot at all. I get:
> 
> Marvell>> bootm
> ## Booting image at 00100000 ...
>    Image Name:   UBoot dns323
>    Image Type:   ARM U-Boot Kernel Image (uncompressed)
>    Data Size:    170100 Bytes = 166.1 kB
>    Load Address: 03000000
>    Entry Point:  03000000
>    Verifying Checksum ... OK
> OK
> 
> Starting kernel ...

There might be machine id mismatch in the kernel and programmed in u-boot for this board.

Regards..
Prafulla . .

> 
> and that is the end of it.
> 
> Any hints and suggestions as to what I may be doing wrong are gratefully
> received.
> 
> Regards,
> 
> Rogan
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot