[U-Boot] OMAP3 Regression after merging ARM relocation code for custom board

[Luca Ceresoli]

Wolfgang, Albert, all,

following last week's discussion [1], here's the patch that would implement
Comelit CPS board support in U-boot.

The point is that this code is not booting.
It is a rebase on top of current master of a previous, working, version
based on v2010.06.
During the rebase process, the code stopped working after rebasing on top of
the ARM Relocation commits.

FWIW, The code compiles correctly.

As you can see by looking at the patch, the core is implemented just like
the BeagleBoard's code. This is because the two boards are identical in
terms of the core devices required for booting (same CPU, same NAND, same
model of RAM but only one chip installed).

A detailed problem report is in the mentioned thread [1].

I hope this helps in finding the issue and finally merge in U-boot.

Thanks in advance,
Luca

[1] http://lists.denx.de/pipermail/u-boot/2011-March/088704.html