[U-Boot] [Patch v2 0/2] rtc, rv3029: add support for trickle charger

[Detlev Zundel]

Hallo Heiko,

> This patchseries adds trickle charger support for the
> RTC RV3029 and add it to the existing digsy_mtc board
> (rev5 boards only).
>
> changes for v2:
> - set CONFIG_SYS_RV3029_TCR to 5k Ohm
>
> checkpatch says:
>
> total: 0 errors, 0 warnings, 117 lines checked
>
> 20110328_2/0001-rtc-rv3029-add-trickle-charger-support.patch has no obvious style problems and is ready for submission.
> total: 0 errors, 0 warnings, 8 lines checked
>
> 20110328_2/0002-mpc52xx-digsy_mtc-add-trickle-charger-support-for-re.patch has no obvious style problems and is ready for submission.
>
> Heiko Schocher (2):
>   rtc, rv3029: add trickle charger support.
>   mpc52xx, digsy_mtc: add trickle charger support for rev5 boards.
>
>  README                      |    2 +
>  drivers/rtc/rv3029.c        |   87 +++++++++++++++++++++++++++++++++++++++++++
>  include/configs/digsy_mtc.h |    2 +
>  3 files changed, 91 insertions(+), 0 deletions(-)

Looks good, so

Acked-by: Detlev Zundel <dzu at denx.de>

Cheers
  Detlev

-- 
It's like manually inflatable airbags -- people will never
think to use it in time to actually get any help from it.
             -- Miles Bader in <20030607122005.GA1086 at gnu.org>
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de