[U-Boot] [PATCH 3/7] Remove instances of phy_read/write
Andy Fleming
afleming at freescale.com
Tue Mar 29 21:30:06 CEST 2011
There were a few files which were already using phy_read and phy_write
for their PHY function names. It's only a few places, and the name
seems most appropriate for the high-level abstraction, so let's
rename the other versions to something more specific.
Also, uec_phy.c had a marvell_init function which I renamed to not
conflict with the one in marvell.c
Signed-off-by: Andy Fleming <afleming at freescale.com>
---
drivers/net/dm9000x.c | 18 +++---
drivers/net/enc28j60.c | 24 ++++----
drivers/net/uli526x.c | 24 ++++----
drivers/qe/uec.c | 3 -
drivers/qe/uec_phy.c | 145 ++++++++++++++++++++++++------------------------
5 files changed, 107 insertions(+), 107 deletions(-)
diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c
index 709f67a..b5c5573 100644
--- a/drivers/net/dm9000x.c
+++ b/drivers/net/dm9000x.c
@@ -110,8 +110,8 @@ static board_info_t dm9000_info;
/* function declaration ------------------------------------- */
static int dm9000_probe(void);
-static u16 phy_read(int);
-static void phy_write(int, u16);
+static u16 dm9000_phy_read(int);
+static void dm9000_phy_write(int, u16);
static u8 DM9000_ior(int);
static void DM9000_iow(int reg, u8 value);
@@ -361,7 +361,7 @@ static int dm9000_init(struct eth_device *dev, bd_t *bd)
DM9000_iow(DM9000_IMR, IMR_PAR);
i = 0;
- while (!(phy_read(1) & 0x20)) { /* autonegation complete bit */
+ while (!(dm9000_phy_read(1) & 0x20)) { /* autonegation complete bit */
udelay(1000);
i++;
if (i == 10000) {
@@ -371,7 +371,7 @@ static int dm9000_init(struct eth_device *dev, bd_t *bd)
}
/* see what we've got */
- lnk = phy_read(17) >> 12;
+ lnk = dm9000_phy_read(17) >> 12;
printf("operating at ");
switch (lnk) {
case 1:
@@ -445,7 +445,7 @@ static void dm9000_halt(struct eth_device *netdev)
DM9000_DBG("%s\n", __func__);
/* RESET devie */
- phy_write(0, 0x8000); /* PHY RESET */
+ dm9000_phy_write(0, 0x8000); /* PHY RESET */
DM9000_iow(DM9000_GPR, 0x01); /* Power-Down PHY */
DM9000_iow(DM9000_IMR, 0x80); /* Disable all interrupt */
DM9000_iow(DM9000_RCR, 0x00); /* Disable RX */
@@ -581,7 +581,7 @@ DM9000_iow(int reg, u8 value)
Read a word from phyxcer
*/
static u16
-phy_read(int reg)
+dm9000_phy_read(int reg)
{
u16 val;
@@ -593,7 +593,7 @@ phy_read(int reg)
val = (DM9000_ior(DM9000_EPDRH) << 8) | DM9000_ior(DM9000_EPDRL);
/* The read data keeps on REG_0D & REG_0E */
- DM9000_DBG("phy_read(0x%x): 0x%x\n", reg, val);
+ DM9000_DBG("dm9000_phy_read(0x%x): 0x%x\n", reg, val);
return val;
}
@@ -601,7 +601,7 @@ phy_read(int reg)
Write a word to phyxcer
*/
static void
-phy_write(int reg, u16 value)
+dm9000_phy_write(int reg, u16 value)
{
/* Fill the phyxcer register into REG_0C */
@@ -613,7 +613,7 @@ phy_write(int reg, u16 value)
DM9000_iow(DM9000_EPCR, 0xa); /* Issue phyxcer write command */
udelay(500); /* Wait write complete */
DM9000_iow(DM9000_EPCR, 0x0); /* Clear phyxcer write command */
- DM9000_DBG("phy_write(reg:0x%x, value:0x%x)\n", reg, value);
+ DM9000_DBG("dm9000_phy_write(reg:0x%x, value:0x%x)\n", reg, value);
}
int dm9000_initialize(bd_t *bis)
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
index 6c161b6..d55cacd 100644
--- a/drivers/net/enc28j60.c
+++ b/drivers/net/enc28j60.c
@@ -314,7 +314,7 @@ static void enc_release_bus(enc_dev_t *enc)
/*
* Read PHY register
*/
-static u16 phy_read(enc_dev_t *enc, const u8 addr)
+static u16 enc_phy_read(enc_dev_t *enc, const u8 addr)
{
uint64_t etime;
u8 status;
@@ -339,7 +339,7 @@ static u16 phy_read(enc_dev_t *enc, const u8 addr)
/*
* Write PHY register
*/
-static void phy_write(enc_dev_t *enc, const u8 addr, const u16 data)
+static void enc_phy_write(enc_dev_t *enc, const u8 addr, const u16 data)
{
uint64_t etime;
u8 status;
@@ -374,7 +374,7 @@ static int enc_phy_link_wait(enc_dev_t *enc)
#ifdef CONFIG_ENC_SILENTLINK
/* check if we have a link, then just return */
- status = phy_read(enc, PHY_REG_PHSTAT1);
+ status = enc_phy_read(enc, PHY_REG_PHSTAT1);
if (status & ENC_PHSTAT1_LLSTAT)
return 0;
#endif
@@ -382,10 +382,10 @@ static int enc_phy_link_wait(enc_dev_t *enc)
/* wait for link with 1 second timeout */
etime = get_ticks() + get_tbclk();
while (get_ticks() <= etime) {
- status = phy_read(enc, PHY_REG_PHSTAT1);
+ status = enc_phy_read(enc, PHY_REG_PHSTAT1);
if (status & ENC_PHSTAT1_LLSTAT) {
/* now we have a link */
- status = phy_read(enc, PHY_REG_PHSTAT2);
+ status = enc_phy_read(enc, PHY_REG_PHSTAT2);
duplex = (status & ENC_PHSTAT2_DPXSTAT) ? 1 : 0;
printf("%s: link up, 10Mbps %s-duplex\n",
enc->dev->name, duplex ? "full" : "half");
@@ -678,8 +678,8 @@ static int enc_setup(enc_dev_t *enc)
enc->bank = 0xff; /* invalidate current bank in enc28j60 */
/* verify PHY identification */
- phid1 = phy_read(enc, PHY_REG_PHID1);
- phid2 = phy_read(enc, PHY_REG_PHID2) & ENC_PHID2_MASK;
+ phid1 = enc_phy_read(enc, PHY_REG_PHID1);
+ phid2 = enc_phy_read(enc, PHY_REG_PHID2) & ENC_PHID2_MASK;
if (phid1 != ENC_PHID1_VALUE || phid2 != ENC_PHID2_VALUE) {
printf("%s: failed to identify PHY. Found %04x:%04x\n",
enc->dev->name, phid1, phid2);
@@ -694,7 +694,7 @@ static int enc_setup(enc_dev_t *enc)
* Prevent automatic loopback of data beeing transmitted by setting
* ENC_PHCON2_HDLDIS
*/
- phy_write(enc, PHY_REG_PHCON2, (1<<8));
+ enc_phy_write(enc, PHY_REG_PHCON2, (1<<8));
/*
* LEDs configuration
@@ -702,10 +702,10 @@ static int enc_setup(enc_dev_t *enc)
* LEDB: LBCFG = 0111 -> display TX & RX activity
* STRCH = 1 -> LED pulses
*/
- phy_write(enc, PHY_REG_PHLCON, 0x0472);
+ enc_phy_write(enc, PHY_REG_PHLCON, 0x0472);
/* Reset PDPXMD-bit => half duplex */
- phy_write(enc, PHY_REG_PHCON1, 0);
+ enc_phy_write(enc, PHY_REG_PHCON1, 0);
#ifdef CONFIG_USE_IRQ
/* enable interrupts */
@@ -771,7 +771,7 @@ int enc_miiphy_read(const char *devname, u8 phy_adr, u8 reg, u16 *value)
enc_release_bus(enc);
return -1;
}
- *value = phy_read(enc, reg);
+ *value = enc_phy_read(enc, reg);
enc_release_bus(enc);
return 0;
}
@@ -796,7 +796,7 @@ int enc_miiphy_write(const char *devname, u8 phy_adr, u8 reg, u16 value)
enc_release_bus(enc);
return -1;
}
- phy_write(enc, reg, value);
+ enc_phy_write(enc, reg, value);
enc_release_bus(enc);
return 0;
}
diff --git a/drivers/net/uli526x.c b/drivers/net/uli526x.c
index a4624e1..5933bdd 100644
--- a/drivers/net/uli526x.c
+++ b/drivers/net/uli526x.c
@@ -175,9 +175,9 @@ static u16 read_srom_word(long, int);
static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long);
static void allocate_rx_buffer(struct uli526x_board_info *);
static void update_cr6(u32, unsigned long);
-static u16 phy_read(unsigned long, u8, u8, u32);
+static u16 uli_phy_read(unsigned long, u8, u8, u32);
static u16 phy_readby_cr10(unsigned long, u8, u8);
-static void phy_write(unsigned long, u8, u8, u16, u32);
+static void uli_phy_write(unsigned long, u8, u8, u16, u32);
static void phy_writeby_cr10(unsigned long, u8, u8, u16);
static void phy_write_1bit(unsigned long, u32, u32);
static u16 phy_read_1bit(unsigned long, u32);
@@ -349,7 +349,7 @@ static void uli526x_disable(struct eth_device *dev)
/* Reset & stop ULI526X board */
outl(ULI526X_RESET, db->ioaddr + DCR0);
udelay(5);
- phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id);
+ uli_phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id);
/* reset the board */
db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */
@@ -385,7 +385,7 @@ static void uli526x_init(struct eth_device *dev)
db->tx_packet_cnt = 0;
for (phy_tmp = 0; phy_tmp < 32; phy_tmp++) {
/* peer add */
- phy_value = phy_read(db->ioaddr, phy_tmp, 3, db->chip_id);
+ phy_value = uli_phy_read(db->ioaddr, phy_tmp, 3, db->chip_id);
if (phy_value != 0xffff && phy_value != 0) {
db->phy_addr = phy_tmp;
break;
@@ -404,10 +404,10 @@ static void uli526x_init(struct eth_device *dev)
if (!(inl(db->ioaddr + DCR12) & 0x8)) {
/* Phyxcer capability setting */
- phy_reg_reset = phy_read(db->ioaddr,
+ phy_reg_reset = uli_phy_read(db->ioaddr,
db->phy_addr, 0, db->chip_id);
phy_reg_reset = (phy_reg_reset | 0x8000);
- phy_write(db->ioaddr, db->phy_addr, 0,
+ uli_phy_write(db->ioaddr, db->phy_addr, 0,
phy_reg_reset, db->chip_id);
udelay(500);
@@ -781,7 +781,8 @@ static void uli526x_set_phyxcer(struct uli526x_board_info *db)
u16 phy_reg;
/* Phyxcer capability setting */
- phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0;
+ phy_reg = uli_phy_read(db->ioaddr,
+ db->phy_addr, 4, db->chip_id) & ~0x01e0;
if (db->media_mode & ULI526X_AUTO) {
/* AUTO Mode */
@@ -802,10 +803,10 @@ static void uli526x_set_phyxcer(struct uli526x_board_info *db)
phy_reg |= db->PHY_reg4;
db->media_mode |= ULI526X_AUTO;
}
- phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id);
+ uli_phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id);
/* Restart Auto-Negotiation */
- phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id);
+ uli_phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id);
udelay(50);
}
@@ -813,7 +814,7 @@ static void uli526x_set_phyxcer(struct uli526x_board_info *db)
* Write a word to Phy register
*/
-static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset,
+static void uli_phy_write(unsigned long iobase, u8 phy_addr, u8 offset,
u16 phy_data, u32 chip_id)
{
u16 i;
@@ -862,7 +863,8 @@ static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset,
* Read a word data from phy register
*/
-static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id)
+static u16 uli_phy_read(unsigned long iobase, u8 phy_addr, u8 offset,
+ u32 chip_id)
{
int i;
u16 phy_data;
diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index 282ab23..81febd6 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -67,9 +67,6 @@ static uec_info_t uec_info[] = {
static struct eth_device *devlist[MAXCONTROLLERS];
-u16 phy_read (struct uec_mii_info *mii_info, u16 regnum);
-void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val);
-
static int uec_mac_enable(uec_private_t *uec, comm_dir_e mode)
{
uec_t *uec_regs;
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index 55c2622..247d522 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -121,8 +121,8 @@ static int gbit_config_aneg (struct uec_mii_info *mii_info);
static int genmii_config_aneg (struct uec_mii_info *mii_info);
static int genmii_update_link (struct uec_mii_info *mii_info);
static int genmii_read_status (struct uec_mii_info *mii_info);
-u16 phy_read (struct uec_mii_info *mii_info, u16 regnum);
-void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val);
+u16 uec_phy_read (struct uec_mii_info *mii_info, u16 regnum);
+void uec_phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val);
/* Write value to the PHY for this device to the register at regnum, */
/* waiting until the write is done before it returns. All PHY */
@@ -242,7 +242,7 @@ static void config_genmii_advert (struct uec_mii_info *mii_info)
advertise = mii_info->advertising;
/* Setup standard advertisement */
- adv = phy_read (mii_info, MII_ADVERTISE);
+ adv = uec_phy_read (mii_info, MII_ADVERTISE);
adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
if (advertise & ADVERTISED_10baseT_Half)
adv |= ADVERTISE_10HALF;
@@ -252,7 +252,7 @@ static void config_genmii_advert (struct uec_mii_info *mii_info)
adv |= ADVERTISE_100HALF;
if (advertise & ADVERTISED_100baseT_Full)
adv |= ADVERTISE_100FULL;
- phy_write (mii_info, MII_ADVERTISE, adv);
+ uec_phy_write (mii_info, MII_ADVERTISE, adv);
}
static void genmii_setup_forced (struct uec_mii_info *mii_info)
@@ -260,7 +260,7 @@ static void genmii_setup_forced (struct uec_mii_info *mii_info)
u16 ctrl;
u32 features = mii_info->phyinfo->features;
- ctrl = phy_read (mii_info, MII_BMCR);
+ ctrl = uec_phy_read (mii_info, MII_BMCR);
ctrl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 |
BMCR_SPEED1000 | BMCR_ANENABLE);
@@ -290,7 +290,7 @@ static void genmii_setup_forced (struct uec_mii_info *mii_info)
break;
}
- phy_write (mii_info, MII_BMCR, ctrl);
+ uec_phy_write (mii_info, MII_BMCR, ctrl);
}
/* Enable and Restart Autonegotiation */
@@ -298,9 +298,9 @@ static void genmii_restart_aneg (struct uec_mii_info *mii_info)
{
u16 ctl;
- ctl = phy_read (mii_info, MII_BMCR);
+ ctl = uec_phy_read (mii_info, MII_BMCR);
ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
- phy_write (mii_info, MII_BMCR, ctl);
+ uec_phy_write (mii_info, MII_BMCR, ctl);
}
static int gbit_config_aneg (struct uec_mii_info *mii_info)
@@ -313,14 +313,14 @@ static int gbit_config_aneg (struct uec_mii_info *mii_info)
config_genmii_advert (mii_info);
advertise = mii_info->advertising;
- adv = phy_read (mii_info, MII_CTRL1000);
+ adv = uec_phy_read (mii_info, MII_CTRL1000);
adv &= ~(ADVERTISE_1000FULL |
ADVERTISE_1000HALF);
if (advertise & SUPPORTED_1000baseT_Half)
adv |= ADVERTISE_1000HALF;
if (advertise & SUPPORTED_1000baseT_Full)
adv |= ADVERTISE_1000FULL;
- phy_write (mii_info, MII_CTRL1000, adv);
+ uec_phy_write (mii_info, MII_CTRL1000, adv);
/* Start/Restart aneg */
genmii_restart_aneg (mii_info);
@@ -335,13 +335,13 @@ static int marvell_config_aneg (struct uec_mii_info *mii_info)
/* The Marvell PHY has an errata which requires
* that certain registers get written in order
* to restart autonegotiation */
- phy_write (mii_info, MII_BMCR, BMCR_RESET);
+ uec_phy_write (mii_info, MII_BMCR, BMCR_RESET);
- phy_write (mii_info, 0x1d, 0x1f);
- phy_write (mii_info, 0x1e, 0x200c);
- phy_write (mii_info, 0x1d, 0x5);
- phy_write (mii_info, 0x1e, 0);
- phy_write (mii_info, 0x1e, 0x100);
+ uec_phy_write (mii_info, 0x1d, 0x1f);
+ uec_phy_write (mii_info, 0x1e, 0x200c);
+ uec_phy_write (mii_info, 0x1d, 0x5);
+ uec_phy_write (mii_info, 0x1e, 0);
+ uec_phy_write (mii_info, 0x1e, 0x100);
gbit_config_aneg (mii_info);
@@ -373,13 +373,13 @@ static int genmii_update_link (struct uec_mii_info *mii_info)
u16 status;
/* Status is read once to clear old link state */
- phy_read (mii_info, MII_BMSR);
+ uec_phy_read (mii_info, MII_BMSR);
/*
* Wait if the link is up, and autonegotiation is in progress
* (ie - we're capable and it's not done)
*/
- status = phy_read(mii_info, MII_BMSR);
+ status = uec_phy_read(mii_info, MII_BMSR);
if ((status & BMSR_LSTATUS) && (status & BMSR_ANEGCAPABLE)
&& !(status & BMSR_ANEGCOMPLETE)) {
int i = 0;
@@ -395,7 +395,7 @@ static int genmii_update_link (struct uec_mii_info *mii_info)
i++;
udelay(1000); /* 1 ms */
- status = phy_read(mii_info, MII_BMSR);
+ status = uec_phy_read(mii_info, MII_BMSR);
}
mii_info->link = 1;
} else {
@@ -420,7 +420,7 @@ static int genmii_read_status (struct uec_mii_info *mii_info)
return err;
if (mii_info->autoneg) {
- status = phy_read(mii_info, MII_STAT1000);
+ status = uec_phy_read(mii_info, MII_STAT1000);
if (status & (LPA_1000FULL | LPA_1000HALF)) {
mii_info->speed = SPEED_1000;
@@ -429,7 +429,7 @@ static int genmii_read_status (struct uec_mii_info *mii_info)
else
mii_info->duplex = DUPLEX_HALF;
} else {
- status = phy_read(mii_info, MII_LPA);
+ status = uec_phy_read(mii_info, MII_LPA);
if (status & (LPA_10FULL | LPA_100FULL))
mii_info->duplex = DUPLEX_FULL;
@@ -463,25 +463,25 @@ static int bcm_init(struct uec_mii_info *mii_info)
/* Wait for aneg to complete. */
do
- val = phy_read(mii_info, MII_BMSR);
+ val = uec_phy_read(mii_info, MII_BMSR);
while (--cnt && !(val & BMSR_ANEGCOMPLETE));
/* Set RDX clk delay. */
- phy_write(mii_info, 0x18, 0x7 | (7 << 12));
+ uec_phy_write(mii_info, 0x18, 0x7 | (7 << 12));
- val = phy_read(mii_info, 0x18);
+ val = uec_phy_read(mii_info, 0x18);
/* Set RDX-RXC skew. */
val |= (1 << 8);
val |= (7 | (7 << 12));
/* Write bits 14:0. */
val |= (1 << 15);
- phy_write(mii_info, 0x18, val);
+ uec_phy_write(mii_info, 0x18, val);
}
return 0;
}
-static int marvell_init(struct uec_mii_info *mii_info)
+static int uec_marvell_init(struct uec_mii_info *mii_info)
{
struct eth_device *edev = mii_info->dev;
uec_private_t *uec = edev->priv;
@@ -494,7 +494,7 @@ static int marvell_init(struct uec_mii_info *mii_info)
iface == RGMII_TXID)) {
int temp;
- temp = phy_read(mii_info, MII_M1111_PHY_EXT_CR);
+ temp = uec_phy_read(mii_info, MII_M1111_PHY_EXT_CR);
if (iface == RGMII_ID) {
temp |= MII_M1111_RX_DELAY | MII_M1111_TX_DELAY;
} else if (iface == RGMII_RXID) {
@@ -504,14 +504,14 @@ static int marvell_init(struct uec_mii_info *mii_info)
temp &= ~MII_M1111_RX_DELAY;
temp |= MII_M1111_TX_DELAY;
}
- phy_write(mii_info, MII_M1111_PHY_EXT_CR, temp);
+ uec_phy_write(mii_info, MII_M1111_PHY_EXT_CR, temp);
- temp = phy_read(mii_info, MII_M1111_PHY_EXT_SR);
+ temp = uec_phy_read(mii_info, MII_M1111_PHY_EXT_SR);
temp &= ~MII_M1111_HWCFG_MODE_MASK;
temp |= MII_M1111_HWCFG_MODE_RGMII;
- phy_write(mii_info, MII_M1111_PHY_EXT_SR, temp);
+ uec_phy_write(mii_info, MII_M1111_PHY_EXT_SR, temp);
- phy_write(mii_info, MII_BMCR, BMCR_RESET);
+ uec_phy_write(mii_info, MII_BMCR, BMCR_RESET);
}
return 0;
@@ -534,7 +534,7 @@ static int marvell_read_status (struct uec_mii_info *mii_info)
if (mii_info->autoneg && mii_info->link) {
int speed;
- status = phy_read (mii_info, MII_M1011_PHY_SPEC_STATUS);
+ status = uec_phy_read (mii_info, MII_M1011_PHY_SPEC_STATUS);
/* Get the duplexity */
if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX)
@@ -564,7 +564,7 @@ static int marvell_read_status (struct uec_mii_info *mii_info)
static int marvell_ack_interrupt (struct uec_mii_info *mii_info)
{
/* Clear the interrupts by reading the reg */
- phy_read (mii_info, MII_M1011_IEVENT);
+ uec_phy_read (mii_info, MII_M1011_IEVENT);
return 0;
}
@@ -572,9 +572,10 @@ static int marvell_ack_interrupt (struct uec_mii_info *mii_info)
static int marvell_config_intr (struct uec_mii_info *mii_info)
{
if (mii_info->interrupts == MII_INTERRUPT_ENABLED)
- phy_write (mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
+ uec_phy_write (mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
else
- phy_write (mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
+ uec_phy_write (mii_info, MII_M1011_IMASK,
+ MII_M1011_IMASK_CLEAR);
return 0;
}
@@ -582,13 +583,13 @@ static int marvell_config_intr (struct uec_mii_info *mii_info)
static int dm9161_init (struct uec_mii_info *mii_info)
{
/* Reset the PHY */
- phy_write (mii_info, MII_BMCR, phy_read (mii_info, MII_BMCR) |
+ uec_phy_write (mii_info, MII_BMCR, uec_phy_read (mii_info, MII_BMCR) |
BMCR_RESET);
/* PHY and MAC connect */
- phy_write (mii_info, MII_BMCR, phy_read (mii_info, MII_BMCR) &
+ uec_phy_write (mii_info, MII_BMCR, uec_phy_read (mii_info, MII_BMCR) &
~BMCR_ISOLATE);
- phy_write (mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT);
+ uec_phy_write (mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT);
config_genmii_advert (mii_info);
/* Start/restart aneg */
@@ -614,7 +615,7 @@ static int dm9161_read_status (struct uec_mii_info *mii_info)
/* If the link is up, read the speed and duplex
If we aren't autonegotiating assume speeds are as set */
if (mii_info->autoneg && mii_info->link) {
- status = phy_read (mii_info, MII_DM9161_SCSR);
+ status = uec_phy_read (mii_info, MII_DM9161_SCSR);
if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H))
mii_info->speed = SPEED_100;
else
@@ -632,7 +633,7 @@ static int dm9161_read_status (struct uec_mii_info *mii_info)
static int dm9161_ack_interrupt (struct uec_mii_info *mii_info)
{
/* Clear the interrupt by reading the reg */
- phy_read (mii_info, MII_DM9161_INTR);
+ uec_phy_read (mii_info, MII_DM9161_INTR);
return 0;
}
@@ -640,9 +641,9 @@ static int dm9161_ack_interrupt (struct uec_mii_info *mii_info)
static int dm9161_config_intr (struct uec_mii_info *mii_info)
{
if (mii_info->interrupts == MII_INTERRUPT_ENABLED)
- phy_write (mii_info, MII_DM9161_INTR, MII_DM9161_INTR_INIT);
+ uec_phy_write (mii_info, MII_DM9161_INTR, MII_DM9161_INTR_INIT);
else
- phy_write (mii_info, MII_DM9161_INTR, MII_DM9161_INTR_STOP);
+ uec_phy_write (mii_info, MII_DM9161_INTR, MII_DM9161_INTR_STOP);
return 0;
}
@@ -696,7 +697,7 @@ static int smsc_read_status (struct uec_mii_info *mii_info)
if (mii_info->autoneg && mii_info->link) {
int val;
- status = phy_read (mii_info, 0x1f);
+ status = uec_phy_read (mii_info, 0x1f);
val = (status & 0x1c) >> 2;
switch (val) {
@@ -751,7 +752,7 @@ static struct phy_info phy_info_marvell = {
.phy_id_mask = 0xffffff00,
.name = "Marvell 88E11x1",
.features = MII_GBIT_FEATURES,
- .init = &marvell_init,
+ .init = &uec_marvell_init,
.config_aneg = &marvell_config_aneg,
.read_status = &marvell_read_status,
.ack_interrupt = &marvell_ack_interrupt,
@@ -804,12 +805,12 @@ static struct phy_info *phy_info[] = {
NULL
};
-u16 phy_read (struct uec_mii_info *mii_info, u16 regnum)
+u16 uec_phy_read (struct uec_mii_info *mii_info, u16 regnum)
{
return mii_info->mdio_read (mii_info->dev, mii_info->mii_id, regnum);
}
-void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val)
+void uec_phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val)
{
mii_info->mdio_write (mii_info->dev, mii_info->mii_id, regnum, val);
}
@@ -825,11 +826,11 @@ struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info)
struct phy_info *theInfo = NULL;
/* Grab the bits from PHYIR1, and put them in the upper half */
- phy_reg = phy_read (mii_info, MII_PHYSID1);
+ phy_reg = uec_phy_read (mii_info, MII_PHYSID1);
phy_ID = (phy_reg & 0xffff) << 16;
/* Grab the bits from PHYIR2, and put them in the lower half */
- phy_reg = phy_read (mii_info, MII_PHYSID2);
+ phy_reg = uec_phy_read (mii_info, MII_PHYSID2);
phy_ID |= (phy_reg & 0xffff);
/* loop through all the known PHY types, and find one that */
@@ -869,39 +870,39 @@ void marvell_phy_interface_mode (struct eth_device *dev,
if (type == RGMII) {
if (speed == 100) {
- phy_write (mii_info, 0x00, 0x9140);
- phy_write (mii_info, 0x1d, 0x001f);
- phy_write (mii_info, 0x1e, 0x200c);
- phy_write (mii_info, 0x1d, 0x0005);
- phy_write (mii_info, 0x1e, 0x0000);
- phy_write (mii_info, 0x1e, 0x0100);
- phy_write (mii_info, 0x09, 0x0e00);
- phy_write (mii_info, 0x04, 0x01e1);
- phy_write (mii_info, 0x00, 0x9140);
- phy_write (mii_info, 0x00, 0x1000);
+ uec_phy_write (mii_info, 0x00, 0x9140);
+ uec_phy_write (mii_info, 0x1d, 0x001f);
+ uec_phy_write (mii_info, 0x1e, 0x200c);
+ uec_phy_write (mii_info, 0x1d, 0x0005);
+ uec_phy_write (mii_info, 0x1e, 0x0000);
+ uec_phy_write (mii_info, 0x1e, 0x0100);
+ uec_phy_write (mii_info, 0x09, 0x0e00);
+ uec_phy_write (mii_info, 0x04, 0x01e1);
+ uec_phy_write (mii_info, 0x00, 0x9140);
+ uec_phy_write (mii_info, 0x00, 0x1000);
udelay (100000);
- phy_write (mii_info, 0x00, 0x2900);
- phy_write (mii_info, 0x14, 0x0cd2);
- phy_write (mii_info, 0x00, 0xa100);
- phy_write (mii_info, 0x09, 0x0000);
- phy_write (mii_info, 0x1b, 0x800b);
- phy_write (mii_info, 0x04, 0x05e1);
- phy_write (mii_info, 0x00, 0xa100);
- phy_write (mii_info, 0x00, 0x2100);
+ uec_phy_write (mii_info, 0x00, 0x2900);
+ uec_phy_write (mii_info, 0x14, 0x0cd2);
+ uec_phy_write (mii_info, 0x00, 0xa100);
+ uec_phy_write (mii_info, 0x09, 0x0000);
+ uec_phy_write (mii_info, 0x1b, 0x800b);
+ uec_phy_write (mii_info, 0x04, 0x05e1);
+ uec_phy_write (mii_info, 0x00, 0xa100);
+ uec_phy_write (mii_info, 0x00, 0x2100);
udelay (1000000);
} else if (speed == 10) {
- phy_write (mii_info, 0x14, 0x8e40);
- phy_write (mii_info, 0x1b, 0x800b);
- phy_write (mii_info, 0x14, 0x0c82);
- phy_write (mii_info, 0x00, 0x8100);
+ uec_phy_write (mii_info, 0x14, 0x8e40);
+ uec_phy_write (mii_info, 0x1b, 0x800b);
+ uec_phy_write (mii_info, 0x14, 0x0c82);
+ uec_phy_write (mii_info, 0x00, 0x8100);
udelay (1000000);
}
}
/* handle 88e1111 rev.B2 erratum 5.6 */
if (mii_info->autoneg) {
- status = phy_read (mii_info, MII_BMCR);
- phy_write (mii_info, MII_BMCR, status | BMCR_ANENABLE);
+ status = uec_phy_read (mii_info, MII_BMCR);
+ uec_phy_write (mii_info, MII_BMCR, status | BMCR_ANENABLE);
}
/* now the B2 will correctly report autoneg completion status */
}
--
1.6.5.2.g6ff9a
More information about the U-Boot
mailing list