[U-Boot] [PATCH] Kirkwood: SATA supports only one device per bus

[Albert ARIBAUD]

Hi Gray,

Le 29/03/2011 21:42, Gray Remlin a écrit :
> Change CONFIG_SYS_IDE_MAXDEVICE from 2 to 1
>
> Signed-off-by: Gray Remlin<gryrmln at gmail.com>
> ---
>   arch/arm/include/asm/arch-kirkwood/config.h |    3 ++-
>   1 files changed, 2 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/include/asm/arch-kirkwood/config.h b/arch/arm/include/asm/arch-kirkwood/config.h
> index 71ba464..f582ba4 100644
> --- a/arch/arm/include/asm/arch-kirkwood/config.h
> +++ b/arch/arm/include/asm/arch-kirkwood/config.h
> @@ -128,7 +128,8 @@
>   #define CONFIG_LBA48
>   /* CONFIG_CMD_IDE requires some #defines for ATA registers */
>   #define CONFIG_SYS_IDE_MAXBUS		2
> -#define CONFIG_SYS_IDE_MAXDEVICE	2
> +/* Only one device per bus on SATA */
> +#define CONFIG_SYS_IDE_MAXDEVICE	1
>   /* ATA registers base is at SATA controller base */
>   #define CONFIG_SYS_ATA_BASE_ADDR	MV_SATA_BASE
>   #endif /* CONFIG_CMD_IDE */

Did you cross-check this patch with Rogan's recent patch?

<http://patchwork.ozlabs.org/patch/87501/>

Amicalement,
-- 
Albert.