[U-Boot] [PATCH v3 06/23] mpc832x: add support for the mpc8321 based suvd3 board
Heiko Schocher
hs at denx.de
Thu Mar 31 08:02:52 CEST 2011
Hello Kim,
Kim Phillips wrote:
> On Mon, 21 Mar 2011 08:02:02 +0100
> Heiko Schocher <hs at denx.de> wrote:
>
>> +++ b/arch/powerpc/cpu/mpc83xx/fdt.c
>> @@ -32,7 +32,8 @@ extern void ft_qe_setup(void *blob);
>>
>> DECLARE_GLOBAL_DATA_PTR;
>>
>> -#if defined(CONFIG_BOOTCOUNT_LIMIT) && defined(CONFIG_MPC8360)
>> +#if defined(CONFIG_BOOTCOUNT_LIMIT) && \
>> + (defined(CONFIG_MPC832x) || defined(CONFIG_MPC8360))
>
> please replace 832x and 8360 with just CONFIG_QE
Ok.
>> +++ b/arch/powerpc/lib/bootcount.c
>> @@ -51,7 +51,7 @@
>> #define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SYS_IMMR + CPM_BOOTCOUNT_ADDR)
>> #endif /* defined(CONFIG_MPC8260) */
>>
>> -#if defined(CONFIG_MPC8360)
>> +#if defined(CONFIG_MPC832x) || defined(CONFIG_MPC8360)
>
> same here
Ok.
>> diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h
>> -#define CONFIG_83XX_CLKIN 66000000
>> -#define CONFIG_SYS_CLK_FREQ 66000000
>> -#define CONFIG_83XX_PCICLK 66000000
>> +#define CONFIG_SYS_SICRH 0x00000006
>
> I realize this was a pre-existing condition, but please make this
> (SICRH_UC1EOBI | SICRH_UC2E1OBI) instead of 6.
Ok.
>> +#define CONFIG_SYS_SICRL 0x00000000
>
> nit-pick, but fyi, one can save a raw write here by not defining it at
> all.
removed.
>> /* PAXE: icache cacheable, but dcache-inhibit and guarded */
>> #define CONFIG_SYS_IBAT5L (CONFIG_SYS_PAXE_BASE | BATL_PP_10 | \
>> - BATL_MEMCOHERENCE)
>> + BATL_MEMCOHERENCE)
>
> B in BATL_ should be aligned to fall directly under the C in
> CONFIG_SYS_PAXE_BASE, like this:
>
> #define CONFIG_SYS_IBAT5L (CONFIG_SYS_PAXE_BASE | BATL_PP_10 | \
> BATL_MEMCOHERENCE)
Ok.
>> #define CONFIG_SYS_IBAT5U (CONFIG_SYS_PAXE_BASE | BATU_BL_256M | \
>> - BATU_VS | BATU_VP)
>> + BATU_VS | BATU_VP)
>
> same here, just as the next one is already:
Ok.
>
>> #define CONFIG_SYS_DBAT5L (CONFIG_SYS_PAXE_BASE | BATL_PP_10 | \
>> BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
>
> <snip>
>> diff --git a/include/configs/suvd3.h b/include/configs/suvd3.h
> <snip>
>> +#define CONFIG_SYS_SICRH 0x00000006
>
> afaict, SICRH doesn't documentally exist on 832x, so omit this line.
> This comment also applies to the following patches in this series:
Ok.
> [PATCH v3 07/23] mpc832x: add support for mpc8321 based tuxa1 board
> [PATCH v3 08/23] mpc832x: add support for mpc8321 based tuda1 board
> [PATCH v3 12/23] keymile, 8321 boards: move common definitions to km8321-common.h
>
> even though the 12/23 patch seems to be a refactoring of the definition
> added by the others...<sigh>.
>
> The rest of the 83xx-touching patches in the series look good to me.
Thanks for reviewing.
bye
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
More information about the U-Boot
mailing list