[U-Boot] [PATCH v3 5/5] Add support for Network Space v2

Simon Guinot simon.guinot at sequanux.org
Mon May 2 11:38:41 CEST 2011


From: Simon Guinot <sguinot at lacie.com>

This patch add support for the Network Space v2 board and parents.
This include Network Space (Max) v2 and Internet Space v2.

Signed-off-by: Simon Guinot <sguinot at lacie.com>
---
 MAINTAINERS                           |    6 +
 board/LaCie/netspace_v2/Makefile      |   49 ++++++++++
 board/LaCie/netspace_v2/kwbimage.cfg  |  162 +++++++++++++++++++++++++++++++++
 board/LaCie/netspace_v2/netspace_v2.c |  144 +++++++++++++++++++++++++++++
 board/LaCie/netspace_v2/netspace_v2.h |   39 ++++++++
 boards.cfg                            |    3 +
 include/configs/netspace_v2.h         |  149 ++++++++++++++++++++++++++++++
 7 files changed, 552 insertions(+), 0 deletions(-)
 create mode 100644 board/LaCie/netspace_v2/Makefile
 create mode 100644 board/LaCie/netspace_v2/kwbimage.cfg
 create mode 100644 board/LaCie/netspace_v2/netspace_v2.c
 create mode 100644 board/LaCie/netspace_v2/netspace_v2.h
 create mode 100644 include/configs/netspace_v2.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 24a55c2..47b724c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -645,6 +645,12 @@ Sedji Gaouaou<sedji.gaouaou at atmel.com>
 	at91sam9g10ek		ARM926EJS (AT91SAM9G10 SoC)
 	at91sam9m10g45ek	ARM926EJS (AT91SAM9G45 SoC)
 
+Simon Guinot <simon.guinot at sequanux.org>
+
+	inetspace_v2	ARM926EJS (Kirkwood SoC)
+	netspace_v2	ARM926EJS (Kirkwood SoC)
+	netspace_max_v2	ARM926EJS (Kirkwood SoC)
+
 Marius Gröger <mag at sysgo.de>
 
 	impa7		ARM720T (EP7211)
diff --git a/board/LaCie/netspace_v2/Makefile b/board/LaCie/netspace_v2/Makefile
new file mode 100644
index 0000000..a245f2c
--- /dev/null
+++ b/board/LaCie/netspace_v2/Makefile
@@ -0,0 +1,49 @@
+#
+# Copyright (C) 2011 Simon Guinot <sguinot at lacie.com>
+#
+# Based on Kirkwood support:
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+# Written-by: Prafulla Wadaskar <prafulla at marvell.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+# GNU General Public License for more details.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	:= netspace_v2.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/LaCie/netspace_v2/kwbimage.cfg b/board/LaCie/netspace_v2/kwbimage.cfg
new file mode 100644
index 0000000..361feeb
--- /dev/null
+++ b/board/LaCie/netspace_v2/kwbimage.cfg
@@ -0,0 +1,162 @@
+#
+# Copyright (C) 2011 Simon Guinot <sguinot at lacie.com>
+#
+# Based on Kirkwood support:
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+# Written-by: Prafulla Wadaskar <prafulla at marvell.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# Refer docs/README.kwimage for more details about how-to configure
+# and create kirkwood boot image
+#
+
+# Boot Media configurations
+BOOT_FROM	spi	# Boot from SPI flash
+
+# SOC registers configuration using bootrom header extension
+# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
+
+# Configure RGMII-0 interface pad voltage to 1.8V
+DATA 0xFFD100e0 0x1B1B1B9B
+
+#Dram initalization for SINGLE x16 CL=5 @ 400MHz
+DATA 0xFFD01400 0x43000618	# DDR Configuration register
+# bit13-0:  0xa00 (2560 DDR2 clks refresh rate)
+# bit23-14: zero
+# bit24: 1= enable exit self refresh mode on DDR access
+# bit25: 1 required
+# bit29-26: zero
+# bit31-30: 01
+
+DATA 0xFFD01404 0x35143000	# DDR Controller Control Low
+# bit 4:    0=addr/cmd in smame cycle
+# bit 5:    0=clk is driven during self refresh, we don't care for APX
+# bit 6:    0=use recommended falling edge of clk for addr/cmd
+# bit14:    0=input buffer always powered up
+# bit18:    1=cpu lock transaction enabled
+# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0
+# bit27-24: 8= CL+3, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM
+# bit30-28: 3 required
+# bit31:    0=no additional STARTBURST delay
+
+DATA 0xFFD01408 0x11012228	# DDR Timing (Low) (active cycles value +1)
+# bit7-4:   TRCD
+# bit11- 8: TRP
+# bit15-12: TWR
+# bit19-16: TWTR
+# bit20:    TRAS msb
+# bit23-21: 0x0
+# bit27-24: TRRD
+# bit31-28: TRTP
+
+DATA 0xFFD0140C 0x00000A19	#  DDR Timing (High)
+# bit6-0:   TRFC
+# bit8-7:   TR2R
+# bit10-9:  TR2W
+# bit12-11: TW2W
+# bit31-13: zero required
+
+DATA 0xFFD01410 0x0000CCCC	#  DDR Address Control
+# bit1-0:   01, Cs0width=x16
+# bit3-2:   11, Cs0size=1Gb
+# bit5-4:   00, Cs2width=nonexistent
+# bit7-6:   00, Cs1size =nonexistent
+# bit9-8:   00, Cs2width=nonexistent
+# bit11-10: 00, Cs2size =nonexistent
+# bit13-12: 00, Cs3width=nonexistent
+# bit15-14: 00, Cs3size =nonexistent
+# bit16:    0,  Cs0AddrSel
+# bit17:    0,  Cs1AddrSel
+# bit18:    0,  Cs2AddrSel
+# bit19:    0,  Cs3AddrSel
+# bit31-20: 0 required
+
+DATA 0xFFD01414 0x00000000	#  DDR Open Pages Control
+# bit0:    0,  OpenPage enabled
+# bit31-1: 0 required
+
+DATA 0xFFD01418 0x00000000	#  DDR Operation
+# bit3-0:   0x0, DDR cmd
+# bit31-4:  0 required
+
+DATA 0xFFD0141C 0x00000632	#  DDR Mode
+# bit2-0:   2, BurstLen=2 required
+# bit3:     0, BurstType=0 required
+# bit6-4:   4, CL=5
+# bit7:     0, TestMode=0 normal
+# bit8:     0, DLL reset=0 normal
+# bit11-9:  6, auto-precharge write recovery ????????????
+# bit12:    0, PD must be zero
+# bit31-13: 0 required
+
+DATA 0xFFD01420 0x00000004	#  DDR Extended Mode
+# bit0:    0,  DDR DLL enabled
+# bit1:    1,  DDR drive strenght reduced
+# bit2:    1,  DDR ODT control lsd enabled
+# bit5-3:  000, required
+# bit6:    1,  DDR ODT control msb, enabled
+# bit9-7:  000, required
+# bit10:   0,  differential DQS enabled
+# bit11:   0, required
+# bit12:   0, DDR output buffer enabled
+# bit31-13: 0 required
+
+DATA 0xFFD01424 0x0000F07F	#  DDR Controller Control High
+# bit2-0:  111, required
+# bit3  :  1  , MBUS Burst Chop disabled
+# bit6-4:  111, required
+# bit7  :  1  , D2P Latency enabled
+# bit8  :  1  , add writepath sample stage, must be 1 for DDR freq >= 300MHz
+# bit9  :  0  , no half clock cycle addition to dataout
+# bit10 :  0  , 1/4 clock cycle skew enabled for addr/ctl signals
+# bit11 :  0  , 1/4 clock cycle skew disabled for write mesh
+# bit15-12: 1111 required
+# bit31-16: 0    required
+
+DATA 0xFFD01428 0x00085520	# DDR2 ODT Read Timing (default values)
+DATA 0xFFD0147C 0x00008552	# DDR2 ODT Write Timing (default values)
+
+DATA 0xFFD01500 0x00000000	# CS[0]n Base address to 0x0
+DATA 0xFFD01504 0x0FFFFFF1	# CS[0]n Size
+# bit0:    1,  Window enabled
+# bit1:    0,  Write Protect disabled
+# bit3-2:  00, CS0 hit selected
+# bit23-4: ones, required
+# bit31-24: 0x07, Size (i.e. 128MB)
+
+DATA 0xFFD0150C 0x00000000	# CS[1]n Size, window disabled
+DATA 0xFFD01514 0x00000000	# CS[2]n Size, window disabled
+DATA 0xFFD0151C 0x00000000	# CS[3]n Size, window disabled
+
+DATA 0xFFD01494 0x00010000	#  DDR ODT Control (Low)
+# bit3-0:  1, ODT0Rd, MODT[0] asserted during read from DRAM CS0
+# bit19-16:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0
+
+DATA 0xFFD01498 0x00000000	#  DDR ODT Control (High)
+# bit1-0:  00, ODT0 controlled by ODT Control (low) register above
+# bit3-2:  01, ODT1 active NEVER!
+# bit31-4: zero, required
+
+DATA 0xFFD0149C 0x0000E40F	# CPU ODT Control
+# bit3-0:  1, ODT0Rd, Internal ODT asserted during read from DRAM bank0
+# bit7-4:  1, ODT0Wr, Internal ODT asserted during write to DRAM bank0
+# bit11-10:1, DQ_ODTSel. ODT select turned on
+
+DATA 0xFFD01480 0x00000001	# DDR Initialization Control
+#bit0=1, enable DDR init upon this register write
+
+# End of Header extension
+DATA 0x0 0x0
diff --git a/board/LaCie/netspace_v2/netspace_v2.c b/board/LaCie/netspace_v2/netspace_v2.c
new file mode 100644
index 0000000..9bc9940
--- /dev/null
+++ b/board/LaCie/netspace_v2/netspace_v2.c
@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2011 Simon Guinot <sguinot at lacie.com>
+ *
+ * Based on Kirkwood support:
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla at marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <command.h>
+#include <asm/arch/kirkwood.h>
+#include <asm/arch/mpp.h>
+#include <asm/arch/gpio.h>
+#include "netspace_v2.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+	/* Gpio configuration */
+	kw_config_gpio(NETSPACE_V2_OE_VAL_LOW, NETSPACE_V2_OE_VAL_HIGH,
+			NETSPACE_V2_OE_LOW, NETSPACE_V2_OE_HIGH);
+
+	/* Multi-Purpose Pins Functionality configuration */
+	u32 kwmpp_config[] = {
+		MPP0_SPI_SCn,
+		MPP1_SPI_MOSI,
+		MPP2_SPI_SCK,
+		MPP3_SPI_MISO,
+		MPP4_NF_IO6,
+		MPP5_NF_IO7,
+		MPP6_SYSRST_OUTn,
+		MPP7_GPO,		/* Fan speed (bit 1) */
+		MPP8_TW_SDA,
+		MPP9_TW_SCK,
+		MPP10_UART0_TXD,
+		MPP11_UART0_RXD,
+		MPP12_GPO,		/* Red led */
+		MPP14_GPIO,		/* USB fuse */
+		MPP16_GPIO,		/* SATA 0 power */
+		MPP17_GPIO,		/* SATA 1 power */
+		MPP18_NF_IO0,
+		MPP19_NF_IO1,
+		MPP20_SATA1_ACTn,
+		MPP21_SATA0_ACTn,
+		MPP22_GPIO,		/* Fan speed (bit 0) */
+		MPP23_GPIO,		/* Fan power */
+		MPP24_GPIO,		/* USB mode select */
+		MPP25_GPIO,		/* Fan rotation fail */
+		MPP26_GPIO,		/* USB vbus-in detection */
+		MPP28_GPIO,		/* USB enable vbus-out */
+		MPP29_GPIO,		/* Blue led (slow register) */
+		MPP30_GPIO,		/* Blue led (command register) */
+		MPP31_GPIO,		/* Board power off */
+		MPP32_GPIO,		/* Button (0 = Released, 1 = Pushed) */
+		MPP33_GPIO,		/* Fan speed (bit 2) */
+		0
+	};
+	kirkwood_mpp_conf(kwmpp_config);
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* Machine number */
+	gd->bd->bi_arch_number = CONFIG_MACH_TYPE;
+
+	/* Boot parameters address */
+	gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
+
+	return 0;
+}
+
+void mv_phy_88e1116_init(char *name)
+{
+	u16 reg;
+	u16 devadr;
+
+	if (miiphy_set_current_dev(name))
+		return;
+
+	/* command to read PHY dev address */
+	if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) {
+		printf("Err..(%s) could not read PHY dev address\n", __func__);
+		return;
+	}
+
+	/*
+	 * Enable RGMII delay on Tx and Rx for CPU port
+	 * Ref: sec 4.7.2 of chip datasheet
+	 */
+	miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2);
+	miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, &reg);
+	reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
+	miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg);
+	miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
+
+	/* reset the phy */
+	if (miiphy_read(name, devadr, MII_BMCR, &reg) != 0) {
+		printf("Err..(%s) PHY status read failed\n", __func__);
+		return;
+	}
+	if (miiphy_write(name, devadr, MII_BMCR, reg | 0x8000) != 0) {
+		printf("Err..(%s) PHY reset failed\n", __func__);
+		return;
+	}
+
+	debug("88E1116 Initialized on %s\n", name);
+}
+
+/* Configure and initialize PHY */
+void reset_phy(void)
+{
+	mv_phy_88e1116_init("egiga0");
+}
+
+#define NETSPACE_V2_GPIO_BUTTON		32
+
+/* Return GPIO button status */
+static int
+do_read_button(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	return kw_gpio_get_value(NETSPACE_V2_GPIO_BUTTON);
+}
+
+U_BOOT_CMD(button, 1, 1, do_read_button,
+	   "Return GPIO button status 0=off 1=on", "");
diff --git a/board/LaCie/netspace_v2/netspace_v2.h b/board/LaCie/netspace_v2/netspace_v2.h
new file mode 100644
index 0000000..c26a6e0
--- /dev/null
+++ b/board/LaCie/netspace_v2/netspace_v2.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2011 Simon Guinot <sguinot at lacie.com>
+ *
+ * Based on Kirkwood support:
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla at marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef NETSPACE_V2_H
+#define NETSPACE_V2_H
+
+#define NETSPACE_V2_OE_LOW		0x06004000
+#define NETSPACE_V2_OE_HIGH		0x00000031
+#define NETSPACE_V2_OE_VAL_LOW		0x10030000
+#define NETSPACE_V2_OE_VAL_HIGH		0x00000000
+
+/* PHY related */
+#define MV88E1116_LED_FCTRL_REG		10
+#define MV88E1116_CPRSP_CR3_REG		21
+#define MV88E1116_MAC_CTRL_REG		21
+#define MV88E1116_PGADR_REG		22
+#define MV88E1116_RGMII_TXTM_CTRL	(1 << 4)
+#define MV88E1116_RGMII_RXTM_CTRL	(1 << 5)
+
+#endif /* NETSPACE_V2_H */
diff --git a/boards.cfg b/boards.cfg
index ac83a6e..4273190 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -104,6 +104,9 @@ davinci_schmoogie            arm         arm926ejs   schmoogie           davinci
 davinci_sffsdr               arm         arm926ejs   sffsdr              davinci        davinci
 davinci_sonata               arm         arm926ejs   sonata              davinci        davinci
 suen3                        arm         arm926ejs   km_arm              keymile        kirkwood
+inetspace_v2                 arm         arm926ejs   netspace_v2         LaCie          kirkwood    netspace_v2:INETSPACE_V2
+netspace_v2                  arm         arm926ejs   netspace_v2         LaCie          kirkwood    netspace_v2:NETSPACE_V2
+netspace_max_v2              arm         arm926ejs   netspace_v2         LaCie          kirkwood    netspace_v2:NETSPACE_MAX_V2
 guruplug                     arm         arm926ejs   -                   Marvell        kirkwood
 mv88f6281gtw_ge              arm         arm926ejs   -                   Marvell        kirkwood
 openrd_base                  arm         arm926ejs   -                   Marvell        kirkwood
diff --git a/include/configs/netspace_v2.h b/include/configs/netspace_v2.h
new file mode 100644
index 0000000..ca4db53
--- /dev/null
+++ b/include/configs/netspace_v2.h
@@ -0,0 +1,149 @@
+/*
+ * Copyright (C) 2011 Simon Guinot <sguinot at lacie.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CONFIG_NETSPACE_V2_H
+#define _CONFIG_NETSPACE_V2_H
+
+/*
+ * Machine number definition
+ */
+#if defined(CONFIG_INETSPACE_V2)
+#define CONFIG_MACH_TYPE		MACH_TYPE_INETSPACE_V2
+#define CONFIG_IDENT_STRING		" LaCie Internet Space v2"
+#elif defined(CONFIG_NETSPACE_V2)
+#define CONFIG_MACH_TYPE		MACH_TYPE_NETSPACE_V2
+#define CONFIG_IDENT_STRING		" LaCie Network Space v2"
+#elif defined(CONFIG_NETSPACE_MAX_V2)
+#define CONFIG_MACH_TYPE		MACH_TYPE_NETSPACE_MAX_V2
+#define CONFIG_IDENT_STRING		" LaCie Network Space Max v2"
+#endif
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+#define CONFIG_FEROCEON_88FR131		1 /* CPU Core subversion */
+#define CONFIG_KIRKWOOD			1 /* SOC Family Name */
+#define CONFIG_KW88F6281		1 /* SOC Name */
+#define CONFIG_MACH_NETSPACE_V2		1 /* Machine type */
+#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
+
+/*
+ * Commands configuration
+ */
+#define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_USB
+
+/*
+ * Core clock definition.
+ */
+#define CONFIG_SYS_TCLK			166000000 /* 166MHz */
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#define CONFIG_NR_DRAM_BANKS		2
+#include "mv-common.h"
+
+/* Remove or override few declarations from mv-common.h */
+#undef CONFIG_RBTREE
+#undef CONFIG_ENV_SPI_MAX_HZ
+#undef CONFIG_SYS_IDE_MAXBUS
+#undef CONFIG_SYS_IDE_MAXDEVICE
+#undef CONFIG_SYS_PROMPT
+#define CONFIG_ENV_SPI_MAX_HZ           20000000 /* 20Mhz */
+#define CONFIG_SYS_IDE_MAXBUS           1
+#define CONFIG_SYS_IDE_MAXDEVICE        1
+#define CONFIG_SYS_PROMPT		"ns2> "
+
+/*
+ * Ethernet Driver configuration
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_MVGBE_PORTS		{1, 0} /* enable port 0 only */
+#define CONFIG_NETCONSOLE
+#endif
+
+/*
+ * SATA Driver configuration
+ */
+#ifdef CONFIG_MVSATA_IDE
+#define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
+/* Network Space Max v2 use 2 SATA ports */
+#ifdef CONFIG_NETSPACE_MAX_V2
+#define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
+#endif
+#endif
+
+/*
+ * Enable GPI0 support
+ */
+#define CONFIG_KIRKWOOD_GPIO
+
+/*
+ * File systems support
+ */
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+
+/*
+ * Use the HUSH parser
+ */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+
+/*
+ * Console configuration
+ */
+#define CONFIG_CONSOLE_MUX		1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
+
+/*
+ * Environment variables configurations
+ */
+#define CONFIG_ENV_IS_IN_SPI_FLASH	1
+#define CONFIG_ENV_SECT_SIZE		0x10000	/* 64KB */
+#define CONFIG_ENV_SIZE			0x1000	/* 4KB */
+#define CONFIG_ENV_ADDR			0x70000
+#define CONFIG_ENV_OFFSET		0x70000	/* env starts here */
+
+/*
+ * Default environment variables
+ */
+#define CONFIG_BOOTARGS "console=ttyS0,115200"
+
+#define CONFIG_BOOTCOMMAND				\
+	"if run usbload || run diskload; then bootm 0x800000; fi"
+
+#define CONFIG_EXTRA_ENV_SETTINGS			\
+	"stdin=serial,nc\0"				\
+	"stdout=serial,nc\0"				\
+	"stderr=serial,nc\0"				\
+	"ipaddr=192.168.1.111\0"			\
+	"diskload=ide reset && "			\
+	"ext2load ide 0:1 0x800000 /boot/uImage\0"	\
+	"usbload=usb start && "				\
+	"fatload usb 0:1 0x800000 /boot/uImage\0"
+
+#endif /* _CONFIG_NETSPACE_V2_H */
-- 
1.6.3.1



More information about the U-Boot mailing list