[U-Boot] [PATCH v5 1/5] sf: disable write protection for Macronix flash

[Simon Guinot]

From: Simon Guinot <sguinot at lacie.com>

Signed-off-by: Simon Guinot <sguinot at lacie.com>
---

Changes for v2: none

Changes for v3:
  - rewrite patch using the common spi flash code

Changes for v4:
  - use spi_flash_cmd_write_enable()

Changes for v5: none

 drivers/mtd/spi/macronix.c |   42 ++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 42 insertions(+), 0 deletions(-)

diff --git a/drivers/mtd/spi/macronix.c b/drivers/mtd/spi/macronix.c
index 96fd5f0..dacbc28 100644
--- a/drivers/mtd/spi/macronix.c
+++ b/drivers/mtd/spi/macronix.c
@@ -117,6 +117,45 @@ static const struct macronix_spi_flash_params macronix_spi_flash_table[] = {
 	},
 };
 
+static int macronix_write_status(struct spi_flash *flash, u8 sr)
+{
+	u8 cmd;
+	int ret;
+
+	ret = spi_flash_cmd_write_enable(flash);
+	if (ret < 0) {
+		debug("SF: enabling write failed\n");
+		return ret;
+	}
+
+	cmd = CMD_MX25XX_WRSR;
+	ret = spi_flash_cmd_write(flash->spi, &cmd, 1, &sr, 1);
+	if (ret) {
+		debug("SF: fail to write status register\n");
+		return ret;
+	}
+
+	ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
+	if (ret < 0) {
+		debug("SF: write status register timed out\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int macronix_unlock(struct spi_flash *flash)
+{
+	int ret;
+
+	/* Enable status register writing and clear BP# bits */
+	ret = macronix_write_status(flash, 0);
+	if (ret)
+		debug("SF: fail to disable write protection\n");
+
+	return ret;
+}
+
 static int macronix_erase(struct spi_flash *flash, u32 offset, size_t len)
 {
 	return spi_flash_cmd_erase(flash, CMD_MX25XX_BE, offset, len);
@@ -157,5 +196,8 @@ struct spi_flash *spi_flash_probe_macronix(struct spi_slave *spi, u8 *idcode)
 		* params->sectors_per_block;
 	flash->size = flash->sector_size * params->nr_blocks;
 
+	/* Clear BP# bits for read-only flash */
+	macronix_unlock(flash);
+
 	return flash;
 }
-- 
1.6.3.1