[U-Boot] [PATCH v2 5/7] powerpc/km82xx: add mgcoge3ne and remove mgcoge2ne support
Holger Brunck
holger.brunck at keymile.com
Tue May 3 10:56:55 CEST 2011
This patch adds support for the MPC8247 based board mgcoge3ne.
Additionaly mgcoge2ne board supprot was removed, because due
to the mgcoge3ne, this board is obsolete and not longer
maintained.
The board is similar to mgcoge. The difference is that
a NUMONYX flash is used and a different SDRAM (256MB).
Also introduce CONFIG_KM_82XX to collect ppc82xx common
settings and remove staticness from the common set_pin function.
Signed-off-by: Holger Brunck <holger.brunck at keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longchamp at keymile.com>
Acked-by: Heiko Schocher <hs at denx.de>
cc: Wolfgang Denk <wd at denx.de>
cc: Detlev Zundel <dzu at denx.de>
---
Changes for v2:
- split up first large patch serie to three independent smaller
patch series
- squashed with powerpc/km82xx: move SDRAM config to board config
from first serie and update commit message
MAINTAINERS | 2 +-
board/keymile/common/common.c | 6 ++--
board/keymile/common/common.h | 1 +
board/keymile/km82xx/km82xx.c | 27 ++++++++++++++-
boards.cfg | 2 +-
include/configs/km82xx-common.h | 26 --------------
include/configs/mgcoge.h | 27 +++++++++++++++
include/configs/{mgcoge2ne.h => mgcoge3ne.h} | 47 ++++++++++++++++++++-----
8 files changed, 96 insertions(+), 42 deletions(-)
rename include/configs/{mgcoge2ne.h => mgcoge3ne.h} (62%)
diff --git a/MAINTAINERS b/MAINTAINERS
index e2a4ba9..e2c48a8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -429,7 +429,7 @@ Heiko Schocher <hs at denx.de>
kmeter1 MPC8360
kmsupx5 MPC8321
mgcoge MPC8247
- mgcoge2ne MPC8247
+ mgcoge3ne MPC8247
mgcoge2un ARM926EJS (Kirkwood SoC)
mucmc52 MPC5200
muas3001 MPC8270
diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c
index dc96489..25a3850 100644
--- a/board/keymile/common/common.c
+++ b/board/keymile/common/common.c
@@ -22,7 +22,7 @@
*/
#include <common.h>
-#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGCOGE2NE)
+#if defined(CONFIG_KM82XX)
#include <mpc8260.h>
#endif
#include <ioports.h>
@@ -398,10 +398,10 @@ int ivm_read_eeprom(void)
#define DELAY_ABORT_SEQ 62 /* @200kHz 9 clocks = 44us, 62us is ok */
#define DELAY_HALF_PERIOD (500 / (CONFIG_SYS_I2C_SPEED / 1000))
-#if defined(CONFIG_MGCOGE) || defined(CONFIG_MGCOGE2NE)
+#if defined(CONFIG_KM_82XX)
#define SDA_MASK 0x00010000
#define SCL_MASK 0x00020000
-static void set_pin(int state, unsigned long mask)
+void set_pin(int state, unsigned long mask)
{
ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 3);
diff --git a/board/keymile/common/common.h b/board/keymile/common/common.h
index 6ce992a..cee24d4 100644
--- a/board/keymile/common/common.h
+++ b/board/keymile/common/common.h
@@ -124,6 +124,7 @@ struct bfticu_iomap {
int ethernet_present(void);
int ivm_read_eeprom(void);
+void set_pin(int state, unsigned long mask);
int set_km_env(void);
int fdt_set_node_and_value(void *blob,
diff --git a/board/keymile/km82xx/km82xx.c b/board/keymile/km82xx/km82xx.c
index 01c0bfd..d453d25 100644
--- a/board/keymile/km82xx/km82xx.c
+++ b/board/keymile/km82xx/km82xx.c
@@ -288,7 +288,7 @@ int checkboard(void)
#if defined(CONFIG_MGCOGE)
puts("Board: Keymile mgcoge");
#else
- puts("Board: Keymile mgcoge2ne");
+ puts("Board: Keymile mgcoge3ne");
#endif
if (ethernet_present())
puts(" with PIGGY.");
@@ -314,6 +314,28 @@ int last_stage_init(void)
return 0;
}
+#ifdef CONFIG_MGCOGE3NE
+/*
+ * For mgcoge3ne boards, the mgcoge3un control is controlled from
+ * a GPIO line on the PPC CPU. If bobcatreset is set the line
+ * will toggle once what forces the mgocge3un part to restart
+ * immediately.
+ */
+void handle_mgcoge3un_reset(void)
+{
+ char *bobcatreset = getenv("bobcatreset");
+ if (bobcatreset) {
+ if (strcmp(bobcatreset, "true") == 0) {
+ puts("Forcing bobcat reset\n");
+ set_pin(0, 0x00000004); /* clear PD29 to reset arm */
+ udelay(1000);
+ set_pin(1, 0x00000004);
+ } else
+ set_pin(1, 0x00000004); /* set PD29 to not reset arm */
+ }
+}
+#endif
+
/*
* Early board initalization.
*/
@@ -329,6 +351,9 @@ int board_early_init_r(void)
out_8(&base->oprtl, (H_OPORTS_SCC4_ENA | H_OPORTS_SCC4_FD_ENA |
H_OPORTS_FCC1_PW_DWN));
+#ifdef CONFIG_MGCOGE3NE
+ handle_mgcoge3un_reset();
+#endif
return 0;
}
diff --git a/boards.cfg b/boards.cfg
index e0791fe..f0d3440 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -440,7 +440,7 @@ PQ2FADS-ZU_66MHz_lowboot powerpc mpc8260 mpc8260ads freesca
PQ2FADS-ZU_lowboot powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS,SYS_TEXT_BASE=0xFF800000
VoVPN-GW_66MHz powerpc mpc8260 vovpn-gw funkwerk - VoVPN-GW:CLKIN_66MHz
mgcoge powerpc mpc8260 km82xx keymile
-mgcoge2ne powerpc mpc8260 km82xx keymile
+mgcoge3ne powerpc mpc8260 km82xx keymile
SCM powerpc mpc8260 - siemens
TQM8255_AA powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8255,300MHz
TQM8260_AA powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8260,200MHz
diff --git a/include/configs/km82xx-common.h b/include/configs/km82xx-common.h
index 345212c..da551c9 100644
--- a/include/configs/km82xx-common.h
+++ b/include/configs/km82xx-common.h
@@ -243,13 +243,6 @@
ORxG_SCY_5_CLK |\
ORxG_TRLX)
-
-/*
- * Bank 1 - 60x bus SDRAM
- */
-#define SDRAM_MAX_SIZE 0x08000000 /* max. 128 MB */
-#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT (256 << 20) /* less than 256 MB */
-
#define CONFIG_SYS_MPTPR 0x1800
/*
@@ -268,25 +261,6 @@
#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR1
/*
- * SDRAM initialization values
- */
-
-#define CONFIG_SYS_OR1 ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
- ORxS_BPD_8 |\
- ORxS_ROWST_PBI0_A7 |\
- ORxS_NUMR_13)
-
-#define CONFIG_SYS_PSDMR (PSDMR_SDAM_A14_IS_A5 |\
- PSDMR_BSMA_A14_A16 |\
- PSDMR_SDA10_PBI0_A9 |\
- PSDMR_RFRC_5_CLK |\
- PSDMR_PRETOACT_2W |\
- PSDMR_ACTTORW_2W |\
- PSDMR_LDOTOPRE_1C |\
- PSDMR_WRC_1C |\
- PSDMR_CL_2)
-
-/*
* UPIO FPGA (GPIO/PIGGY) on CS3 initialization values
*/
#define CONFIG_SYS_KMBEC_FPGA_BASE 0x30000000
diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h
index 3d2ee24..93a6f4a 100644
--- a/include/configs/mgcoge.h
+++ b/include/configs/mgcoge.h
@@ -32,6 +32,7 @@
#define CONFIG_MPC8247
#define CONFIG_MGCOGE
#define CONFIG_HOSTNAME mgcoge
+#define CONFIG_KM_82XX
#define CONFIG_SYS_TEXT_BASE 0xFE000000
@@ -58,6 +59,32 @@
CONFIG_SYS_FLASH_BASE_2 }
#define MTDIDS_DEFAULT "nor3=app"
+/*
+ * Bank 1 - 60x bus SDRAM
+ */
+#define SDRAM_MAX_SIZE 0x08000000 /* max. 128 MB */
+#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT (256 << 20) /* less than 256 MB */
+
+/* SDRAM initialization values
+*/
+
+#define CONFIG_SYS_OR1 ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & \
+ ORxS_SDAM_MSK) |\
+ ORxS_BPD_8 |\
+ ORxS_ROWST_PBI0_A7 |\
+ ORxS_NUMR_13)
+
+#define CONFIG_SYS_PSDMR (PSDMR_SDAM_A14_IS_A5 |\
+ PSDMR_BSMA_A14_A16 |\
+ PSDMR_SDA10_PBI0_A9 |\
+ PSDMR_RFRC_5_CLK |\
+ PSDMR_PRETOACT_2W |\
+ PSDMR_ACTTORW_2W |\
+ PSDMR_LDOTOPRE_1C |\
+ PSDMR_WRC_1C |\
+ PSDMR_CL_2)
+
+
/* include further common stuff for all keymile 82xx boards */
#include "km82xx-common.h"
diff --git a/include/configs/mgcoge2ne.h b/include/configs/mgcoge3ne.h
similarity index 62%
rename from include/configs/mgcoge2ne.h
rename to include/configs/mgcoge3ne.h
index 287b717..f080619 100644
--- a/include/configs/mgcoge2ne.h
+++ b/include/configs/mgcoge3ne.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2007-2010
+ * (C) Copyright 2011
* Heiko Schocher, DENX Software Engineering, hs at denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -21,16 +21,18 @@
* MA 02111-1307 USA
*/
-#ifndef __MGCOGE2NE
-#define __MGCOGE2NE
+#ifndef __MGCOGE3NE
+#define __MGCOGE3NE
/*
* High Level Configuration Options
* (easy to change)
*/
+
#define CONFIG_MPC8247
-#define CONFIG_MGCOGE
-#define CONFIG_HOSTNAME mgcoge2ne
+#define CONFIG_MGCOGE3NE
+#define CONFIG_HOSTNAME mgcoge3ne
+#define CONFIG_KM_82XX
#define CONFIG_SYS_TEXT_BASE 0xFE000000
@@ -43,22 +45,47 @@
#define CONFIG_SYS_FLASH_SIZE 32
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_MAX_FLASH_BANKS 3 /* max num of flash banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 512 /*
+#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of flash banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 1024 /*
* max num of sects on one
* chip
*/
#define CONFIG_SYS_FLASH_BASE_1 0x50000000
-#define CONFIG_SYS_FLASH_SIZE_1 64
-#define CONFIG_SYS_FLASH_SIZE_2 0
+#define CONFIG_SYS_FLASH_SIZE_1 128
+
+#define CONFIG_SYS_FLASH_SIZE_2 0 /* dummy value to calc SYS_OR5 */
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \
CONFIG_SYS_FLASH_BASE_1 }
#define MTDIDS_DEFAULT "nor2=app"
+/*
+ * Bank 1 - 60x bus SDRAM
+ * mgcoge3ne has 256M.
+ */
+#define SDRAM_MAX_SIZE 0x10000000 /* max. 256 MB */
+#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT (512 << 20) /* less than 512 MB */
+
+#define CONFIG_SYS_OR1 ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & \
+ ORxS_SDAM_MSK) |\
+ ORxS_BPD_4 |\
+ ORxS_ROWST_PBI1_A4 |\
+ ORxS_NUMR_13)
+
+#define CONFIG_SYS_PSDMR (PSDMR_PBI |\
+ PSDMR_SDAM_A17_IS_A5 |\
+ PSDMR_BSMA_A13_A15 |\
+ PSDMR_SDA10_PBI1_A6 |\
+ PSDMR_RFRC_5_CLK |\
+ PSDMR_PRETOACT_2W |\
+ PSDMR_ACTTORW_2W |\
+ PSDMR_LDOTOPRE_1C |\
+ PSDMR_WRC_2C |\
+ PSDMR_CL_2)
+
/* include further common stuff for all keymile 82xx boards */
#include "km82xx-common.h"
-#endif /* __MGCOGE2NE */
+#endif /* __MGCOGE3NE */
--
1.7.1
More information about the U-Boot
mailing list