[U-Boot] [PATCH v5 5/5] Add support for Network Space v2

Simon Guinot simon at sequanux.org
Tue May 3 15:19:42 CEST 2011


Hi Wolfgang,

I have failed to find an entry for this patch in the U-Boot patchwork
(and any previous version except the very first).

Have I missed something and/or done something wrong ?

Regards,

Simon

On Tue, May 03, 2011 at 12:42:28AM +0200, Simon Guinot wrote:
> From: Simon Guinot <sguinot at lacie.com>
> 
> This patch add support for the Network Space v2 board and parents, based
> on the Marvell Kirkwood SoC. This include Network Space (Max) v2 and
> Internet Space v2.
> 
> Signed-off-by: Simon Guinot <sguinot at lacie.com>
> ---
> Changes for v2:
>   - add entries to MAINTAINERS file
>   - move boards from root Makefile to boards.cfg
>   - move MACH_TYPE definition into netspace_v2.h
>   - remove CONFIG_SYS_HZ redefinition
>   - turn PHY initialization message into debug()
> 
> Changes for v3: none
> 
> Changes for v4: 
>   - enhance commit message: add SoC information
> 
> Changes for v5: none
> 
>  MAINTAINERS                           |    6 +
>  board/LaCie/netspace_v2/Makefile      |   49 ++++++++++
>  board/LaCie/netspace_v2/kwbimage.cfg  |  162 +++++++++++++++++++++++++++++++++
>  board/LaCie/netspace_v2/netspace_v2.c |  144 +++++++++++++++++++++++++++++
>  board/LaCie/netspace_v2/netspace_v2.h |   39 ++++++++
>  boards.cfg                            |    3 +
>  include/configs/netspace_v2.h         |  149 ++++++++++++++++++++++++++++++
>  7 files changed, 552 insertions(+), 0 deletions(-)
>  create mode 100644 board/LaCie/netspace_v2/Makefile
>  create mode 100644 board/LaCie/netspace_v2/kwbimage.cfg
>  create mode 100644 board/LaCie/netspace_v2/netspace_v2.c
>  create mode 100644 board/LaCie/netspace_v2/netspace_v2.h
>  create mode 100644 include/configs/netspace_v2.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index e2a4ba9..f905a48 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -652,6 +652,12 @@ Sedji Gaouaou<sedji.gaouaou at atmel.com>
>  	at91sam9g10ek		ARM926EJS (AT91SAM9G10 SoC)
>  	at91sam9m10g45ek	ARM926EJS (AT91SAM9G45 SoC)
>  
> +Simon Guinot <simon.guinot at sequanux.org>
> +
> +	inetspace_v2	ARM926EJS (Kirkwood SoC)
> +	netspace_v2	ARM926EJS (Kirkwood SoC)
> +	netspace_max_v2	ARM926EJS (Kirkwood SoC)
> +
>  Marius Gröger <mag at sysgo.de>
>  
>  	impa7		ARM720T (EP7211)
> diff --git a/board/LaCie/netspace_v2/Makefile b/board/LaCie/netspace_v2/Makefile
> new file mode 100644
> index 0000000..a245f2c
> --- /dev/null
> +++ b/board/LaCie/netspace_v2/Makefile
> @@ -0,0 +1,49 @@
> +#
> +# Copyright (C) 2011 Simon Guinot <sguinot at lacie.com>
> +#
> +# Based on Kirkwood support:
> +# (C) Copyright 2009
> +# Marvell Semiconductor <www.marvell.com>
> +# Written-by: Prafulla Wadaskar <prafulla at marvell.com>
> +#
> +# See file CREDITS for list of people who contributed to this
> +# project.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation; either version 2 of
> +# the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
> +# GNU General Public License for more details.
> +#
> +
> +include $(TOPDIR)/config.mk
> +
> +LIB	= $(obj)lib$(BOARD).o
> +
> +COBJS	:= netspace_v2.o
> +
> +SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
> +OBJS	:= $(addprefix $(obj),$(COBJS))
> +SOBJS	:= $(addprefix $(obj),$(SOBJS))
> +
> +$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
> +	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
> +
> +clean:
> +	rm -f $(SOBJS) $(OBJS)
> +
> +distclean:	clean
> +	rm -f $(LIB) core *.bak .depend
> +
> +#########################################################################
> +
> +# defines $(obj).depend target
> +include $(SRCTREE)/rules.mk
> +
> +sinclude $(obj).depend
> +
> +#########################################################################
> diff --git a/board/LaCie/netspace_v2/kwbimage.cfg b/board/LaCie/netspace_v2/kwbimage.cfg
> new file mode 100644
> index 0000000..361feeb
> --- /dev/null
> +++ b/board/LaCie/netspace_v2/kwbimage.cfg
> @@ -0,0 +1,162 @@
> +#
> +# Copyright (C) 2011 Simon Guinot <sguinot at lacie.com>
> +#
> +# Based on Kirkwood support:
> +# (C) Copyright 2009
> +# Marvell Semiconductor <www.marvell.com>
> +# Written-by: Prafulla Wadaskar <prafulla at marvell.com>
> +#
> +# See file CREDITS for list of people who contributed to this
> +# project.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation; either version 2 of
> +# the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# Refer docs/README.kwimage for more details about how-to configure
> +# and create kirkwood boot image
> +#
> +
> +# Boot Media configurations
> +BOOT_FROM	spi	# Boot from SPI flash
> +
> +# SOC registers configuration using bootrom header extension
> +# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
> +
> +# Configure RGMII-0 interface pad voltage to 1.8V
> +DATA 0xFFD100e0 0x1B1B1B9B
> +
> +#Dram initalization for SINGLE x16 CL=5 @ 400MHz
> +DATA 0xFFD01400 0x43000618	# DDR Configuration register
> +# bit13-0:  0xa00 (2560 DDR2 clks refresh rate)
> +# bit23-14: zero
> +# bit24: 1= enable exit self refresh mode on DDR access
> +# bit25: 1 required
> +# bit29-26: zero
> +# bit31-30: 01
> +
> +DATA 0xFFD01404 0x35143000	# DDR Controller Control Low
> +# bit 4:    0=addr/cmd in smame cycle
> +# bit 5:    0=clk is driven during self refresh, we don't care for APX
> +# bit 6:    0=use recommended falling edge of clk for addr/cmd
> +# bit14:    0=input buffer always powered up
> +# bit18:    1=cpu lock transaction enabled
> +# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0
> +# bit27-24: 8= CL+3, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM
> +# bit30-28: 3 required
> +# bit31:    0=no additional STARTBURST delay
> +
> +DATA 0xFFD01408 0x11012228	# DDR Timing (Low) (active cycles value +1)
> +# bit7-4:   TRCD
> +# bit11- 8: TRP
> +# bit15-12: TWR
> +# bit19-16: TWTR
> +# bit20:    TRAS msb
> +# bit23-21: 0x0
> +# bit27-24: TRRD
> +# bit31-28: TRTP
> +
> +DATA 0xFFD0140C 0x00000A19	#  DDR Timing (High)
> +# bit6-0:   TRFC
> +# bit8-7:   TR2R
> +# bit10-9:  TR2W
> +# bit12-11: TW2W
> +# bit31-13: zero required
> +
> +DATA 0xFFD01410 0x0000CCCC	#  DDR Address Control
> +# bit1-0:   01, Cs0width=x16
> +# bit3-2:   11, Cs0size=1Gb
> +# bit5-4:   00, Cs2width=nonexistent
> +# bit7-6:   00, Cs1size =nonexistent
> +# bit9-8:   00, Cs2width=nonexistent
> +# bit11-10: 00, Cs2size =nonexistent
> +# bit13-12: 00, Cs3width=nonexistent
> +# bit15-14: 00, Cs3size =nonexistent
> +# bit16:    0,  Cs0AddrSel
> +# bit17:    0,  Cs1AddrSel
> +# bit18:    0,  Cs2AddrSel
> +# bit19:    0,  Cs3AddrSel
> +# bit31-20: 0 required
> +
> +DATA 0xFFD01414 0x00000000	#  DDR Open Pages Control
> +# bit0:    0,  OpenPage enabled
> +# bit31-1: 0 required
> +
> +DATA 0xFFD01418 0x00000000	#  DDR Operation
> +# bit3-0:   0x0, DDR cmd
> +# bit31-4:  0 required
> +
> +DATA 0xFFD0141C 0x00000632	#  DDR Mode
> +# bit2-0:   2, BurstLen=2 required
> +# bit3:     0, BurstType=0 required
> +# bit6-4:   4, CL=5
> +# bit7:     0, TestMode=0 normal
> +# bit8:     0, DLL reset=0 normal
> +# bit11-9:  6, auto-precharge write recovery ????????????
> +# bit12:    0, PD must be zero
> +# bit31-13: 0 required
> +
> +DATA 0xFFD01420 0x00000004	#  DDR Extended Mode
> +# bit0:    0,  DDR DLL enabled
> +# bit1:    1,  DDR drive strenght reduced
> +# bit2:    1,  DDR ODT control lsd enabled
> +# bit5-3:  000, required
> +# bit6:    1,  DDR ODT control msb, enabled
> +# bit9-7:  000, required
> +# bit10:   0,  differential DQS enabled
> +# bit11:   0, required
> +# bit12:   0, DDR output buffer enabled
> +# bit31-13: 0 required
> +
> +DATA 0xFFD01424 0x0000F07F	#  DDR Controller Control High
> +# bit2-0:  111, required
> +# bit3  :  1  , MBUS Burst Chop disabled
> +# bit6-4:  111, required
> +# bit7  :  1  , D2P Latency enabled
> +# bit8  :  1  , add writepath sample stage, must be 1 for DDR freq >= 300MHz
> +# bit9  :  0  , no half clock cycle addition to dataout
> +# bit10 :  0  , 1/4 clock cycle skew enabled for addr/ctl signals
> +# bit11 :  0  , 1/4 clock cycle skew disabled for write mesh
> +# bit15-12: 1111 required
> +# bit31-16: 0    required
> +
> +DATA 0xFFD01428 0x00085520	# DDR2 ODT Read Timing (default values)
> +DATA 0xFFD0147C 0x00008552	# DDR2 ODT Write Timing (default values)
> +
> +DATA 0xFFD01500 0x00000000	# CS[0]n Base address to 0x0
> +DATA 0xFFD01504 0x0FFFFFF1	# CS[0]n Size
> +# bit0:    1,  Window enabled
> +# bit1:    0,  Write Protect disabled
> +# bit3-2:  00, CS0 hit selected
> +# bit23-4: ones, required
> +# bit31-24: 0x07, Size (i.e. 128MB)
> +
> +DATA 0xFFD0150C 0x00000000	# CS[1]n Size, window disabled
> +DATA 0xFFD01514 0x00000000	# CS[2]n Size, window disabled
> +DATA 0xFFD0151C 0x00000000	# CS[3]n Size, window disabled
> +
> +DATA 0xFFD01494 0x00010000	#  DDR ODT Control (Low)
> +# bit3-0:  1, ODT0Rd, MODT[0] asserted during read from DRAM CS0
> +# bit19-16:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0
> +
> +DATA 0xFFD01498 0x00000000	#  DDR ODT Control (High)
> +# bit1-0:  00, ODT0 controlled by ODT Control (low) register above
> +# bit3-2:  01, ODT1 active NEVER!
> +# bit31-4: zero, required
> +
> +DATA 0xFFD0149C 0x0000E40F	# CPU ODT Control
> +# bit3-0:  1, ODT0Rd, Internal ODT asserted during read from DRAM bank0
> +# bit7-4:  1, ODT0Wr, Internal ODT asserted during write to DRAM bank0
> +# bit11-10:1, DQ_ODTSel. ODT select turned on
> +
> +DATA 0xFFD01480 0x00000001	# DDR Initialization Control
> +#bit0=1, enable DDR init upon this register write
> +
> +# End of Header extension
> +DATA 0x0 0x0
> diff --git a/board/LaCie/netspace_v2/netspace_v2.c b/board/LaCie/netspace_v2/netspace_v2.c
> new file mode 100644
> index 0000000..9bc9940
> --- /dev/null
> +++ b/board/LaCie/netspace_v2/netspace_v2.c
> @@ -0,0 +1,144 @@
> +/*
> + * Copyright (C) 2011 Simon Guinot <sguinot at lacie.com>
> + *
> + * Based on Kirkwood support:
> + * (C) Copyright 2009
> + * Marvell Semiconductor <www.marvell.com>
> + * Written-by: Prafulla Wadaskar <prafulla at marvell.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <common.h>
> +#include <miiphy.h>
> +#include <netdev.h>
> +#include <command.h>
> +#include <asm/arch/kirkwood.h>
> +#include <asm/arch/mpp.h>
> +#include <asm/arch/gpio.h>
> +#include "netspace_v2.h"
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +int board_early_init_f(void)
> +{
> +	/* Gpio configuration */
> +	kw_config_gpio(NETSPACE_V2_OE_VAL_LOW, NETSPACE_V2_OE_VAL_HIGH,
> +			NETSPACE_V2_OE_LOW, NETSPACE_V2_OE_HIGH);
> +
> +	/* Multi-Purpose Pins Functionality configuration */
> +	u32 kwmpp_config[] = {
> +		MPP0_SPI_SCn,
> +		MPP1_SPI_MOSI,
> +		MPP2_SPI_SCK,
> +		MPP3_SPI_MISO,
> +		MPP4_NF_IO6,
> +		MPP5_NF_IO7,
> +		MPP6_SYSRST_OUTn,
> +		MPP7_GPO,		/* Fan speed (bit 1) */
> +		MPP8_TW_SDA,
> +		MPP9_TW_SCK,
> +		MPP10_UART0_TXD,
> +		MPP11_UART0_RXD,
> +		MPP12_GPO,		/* Red led */
> +		MPP14_GPIO,		/* USB fuse */
> +		MPP16_GPIO,		/* SATA 0 power */
> +		MPP17_GPIO,		/* SATA 1 power */
> +		MPP18_NF_IO0,
> +		MPP19_NF_IO1,
> +		MPP20_SATA1_ACTn,
> +		MPP21_SATA0_ACTn,
> +		MPP22_GPIO,		/* Fan speed (bit 0) */
> +		MPP23_GPIO,		/* Fan power */
> +		MPP24_GPIO,		/* USB mode select */
> +		MPP25_GPIO,		/* Fan rotation fail */
> +		MPP26_GPIO,		/* USB vbus-in detection */
> +		MPP28_GPIO,		/* USB enable vbus-out */
> +		MPP29_GPIO,		/* Blue led (slow register) */
> +		MPP30_GPIO,		/* Blue led (command register) */
> +		MPP31_GPIO,		/* Board power off */
> +		MPP32_GPIO,		/* Button (0 = Released, 1 = Pushed) */
> +		MPP33_GPIO,		/* Fan speed (bit 2) */
> +		0
> +	};
> +	kirkwood_mpp_conf(kwmpp_config);
> +
> +	return 0;
> +}
> +
> +int board_init(void)
> +{
> +	/* Machine number */
> +	gd->bd->bi_arch_number = CONFIG_MACH_TYPE;
> +
> +	/* Boot parameters address */
> +	gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
> +
> +	return 0;
> +}
> +
> +void mv_phy_88e1116_init(char *name)
> +{
> +	u16 reg;
> +	u16 devadr;
> +
> +	if (miiphy_set_current_dev(name))
> +		return;
> +
> +	/* command to read PHY dev address */
> +	if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) {
> +		printf("Err..(%s) could not read PHY dev address\n", __func__);
> +		return;
> +	}
> +
> +	/*
> +	 * Enable RGMII delay on Tx and Rx for CPU port
> +	 * Ref: sec 4.7.2 of chip datasheet
> +	 */
> +	miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2);
> +	miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, &reg);
> +	reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
> +	miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg);
> +	miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
> +
> +	/* reset the phy */
> +	if (miiphy_read(name, devadr, MII_BMCR, &reg) != 0) {
> +		printf("Err..(%s) PHY status read failed\n", __func__);
> +		return;
> +	}
> +	if (miiphy_write(name, devadr, MII_BMCR, reg | 0x8000) != 0) {
> +		printf("Err..(%s) PHY reset failed\n", __func__);
> +		return;
> +	}
> +
> +	debug("88E1116 Initialized on %s\n", name);
> +}
> +
> +/* Configure and initialize PHY */
> +void reset_phy(void)
> +{
> +	mv_phy_88e1116_init("egiga0");
> +}
> +
> +#define NETSPACE_V2_GPIO_BUTTON		32
> +
> +/* Return GPIO button status */
> +static int
> +do_read_button(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
> +{
> +	return kw_gpio_get_value(NETSPACE_V2_GPIO_BUTTON);
> +}
> +
> +U_BOOT_CMD(button, 1, 1, do_read_button,
> +	   "Return GPIO button status 0=off 1=on", "");
> diff --git a/board/LaCie/netspace_v2/netspace_v2.h b/board/LaCie/netspace_v2/netspace_v2.h
> new file mode 100644
> index 0000000..c26a6e0
> --- /dev/null
> +++ b/board/LaCie/netspace_v2/netspace_v2.h
> @@ -0,0 +1,39 @@
> +/*
> + * Copyright (C) 2011 Simon Guinot <sguinot at lacie.com>
> + *
> + * Based on Kirkwood support:
> + * (C) Copyright 2009
> + * Marvell Semiconductor <www.marvell.com>
> + * Written-by: Prafulla Wadaskar <prafulla at marvell.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef NETSPACE_V2_H
> +#define NETSPACE_V2_H
> +
> +#define NETSPACE_V2_OE_LOW		0x06004000
> +#define NETSPACE_V2_OE_HIGH		0x00000031
> +#define NETSPACE_V2_OE_VAL_LOW		0x10030000
> +#define NETSPACE_V2_OE_VAL_HIGH		0x00000000
> +
> +/* PHY related */
> +#define MV88E1116_LED_FCTRL_REG		10
> +#define MV88E1116_CPRSP_CR3_REG		21
> +#define MV88E1116_MAC_CTRL_REG		21
> +#define MV88E1116_PGADR_REG		22
> +#define MV88E1116_RGMII_TXTM_CTRL	(1 << 4)
> +#define MV88E1116_RGMII_RXTM_CTRL	(1 << 5)
> +
> +#endif /* NETSPACE_V2_H */
> diff --git a/boards.cfg b/boards.cfg
> index 2b0900a..459dee4 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -106,6 +106,9 @@ davinci_sonata               arm         arm926ejs   sonata              davinci
>  suen3                        arm         arm926ejs   km_arm              keymile        kirkwood
>  suen8                        arm         arm926ejs   km_arm              keymile        kirkwood
>  mgcoge2un                    arm         arm926ejs   km_arm              keymile        kirkwood
> +inetspace_v2                 arm         arm926ejs   netspace_v2         LaCie          kirkwood    netspace_v2:INETSPACE_V2
> +netspace_v2                  arm         arm926ejs   netspace_v2         LaCie          kirkwood    netspace_v2:NETSPACE_V2
> +netspace_max_v2              arm         arm926ejs   netspace_v2         LaCie          kirkwood    netspace_v2:NETSPACE_MAX_V2
>  guruplug                     arm         arm926ejs   -                   Marvell        kirkwood
>  mv88f6281gtw_ge              arm         arm926ejs   -                   Marvell        kirkwood
>  openrd_base                  arm         arm926ejs   -                   Marvell        kirkwood
> diff --git a/include/configs/netspace_v2.h b/include/configs/netspace_v2.h
> new file mode 100644
> index 0000000..ca4db53
> --- /dev/null
> +++ b/include/configs/netspace_v2.h
> @@ -0,0 +1,149 @@
> +/*
> + * Copyright (C) 2011 Simon Guinot <sguinot at lacie.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef _CONFIG_NETSPACE_V2_H
> +#define _CONFIG_NETSPACE_V2_H
> +
> +/*
> + * Machine number definition
> + */
> +#if defined(CONFIG_INETSPACE_V2)
> +#define CONFIG_MACH_TYPE		MACH_TYPE_INETSPACE_V2
> +#define CONFIG_IDENT_STRING		" LaCie Internet Space v2"
> +#elif defined(CONFIG_NETSPACE_V2)
> +#define CONFIG_MACH_TYPE		MACH_TYPE_NETSPACE_V2
> +#define CONFIG_IDENT_STRING		" LaCie Network Space v2"
> +#elif defined(CONFIG_NETSPACE_MAX_V2)
> +#define CONFIG_MACH_TYPE		MACH_TYPE_NETSPACE_MAX_V2
> +#define CONFIG_IDENT_STRING		" LaCie Network Space Max v2"
> +#endif
> +
> +/*
> + * High Level Configuration Options (easy to change)
> + */
> +#define CONFIG_FEROCEON_88FR131		1 /* CPU Core subversion */
> +#define CONFIG_KIRKWOOD			1 /* SOC Family Name */
> +#define CONFIG_KW88F6281		1 /* SOC Name */
> +#define CONFIG_MACH_NETSPACE_V2		1 /* Machine type */
> +#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
> +
> +/*
> + * Commands configuration
> + */
> +#define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
> +#include <config_cmd_default.h>
> +#define CONFIG_CMD_ENV
> +#define CONFIG_CMD_DHCP
> +#define CONFIG_CMD_PING
> +#define CONFIG_CMD_SF
> +#define CONFIG_CMD_I2C
> +#define CONFIG_CMD_IDE
> +#define CONFIG_CMD_USB
> +
> +/*
> + * Core clock definition.
> + */
> +#define CONFIG_SYS_TCLK			166000000 /* 166MHz */
> +
> +/*
> + * mv-common.h should be defined after CMD configs since it used them
> + * to enable certain macros
> + */
> +#define CONFIG_NR_DRAM_BANKS		2
> +#include "mv-common.h"
> +
> +/* Remove or override few declarations from mv-common.h */
> +#undef CONFIG_RBTREE
> +#undef CONFIG_ENV_SPI_MAX_HZ
> +#undef CONFIG_SYS_IDE_MAXBUS
> +#undef CONFIG_SYS_IDE_MAXDEVICE
> +#undef CONFIG_SYS_PROMPT
> +#define CONFIG_ENV_SPI_MAX_HZ           20000000 /* 20Mhz */
> +#define CONFIG_SYS_IDE_MAXBUS           1
> +#define CONFIG_SYS_IDE_MAXDEVICE        1
> +#define CONFIG_SYS_PROMPT		"ns2> "
> +
> +/*
> + * Ethernet Driver configuration
> + */
> +#ifdef CONFIG_CMD_NET
> +#define CONFIG_MVGBE_PORTS		{1, 0} /* enable port 0 only */
> +#define CONFIG_NETCONSOLE
> +#endif
> +
> +/*
> + * SATA Driver configuration
> + */
> +#ifdef CONFIG_MVSATA_IDE
> +#define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
> +/* Network Space Max v2 use 2 SATA ports */
> +#ifdef CONFIG_NETSPACE_MAX_V2
> +#define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
> +#endif
> +#endif
> +
> +/*
> + * Enable GPI0 support
> + */
> +#define CONFIG_KIRKWOOD_GPIO
> +
> +/*
> + * File systems support
> + */
> +#define CONFIG_CMD_EXT2
> +#define CONFIG_CMD_FAT
> +
> +/*
> + * Use the HUSH parser
> + */
> +#define CONFIG_SYS_HUSH_PARSER
> +#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
> +
> +/*
> + * Console configuration
> + */
> +#define CONFIG_CONSOLE_MUX		1
> +#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
> +
> +/*
> + * Environment variables configurations
> + */
> +#define CONFIG_ENV_IS_IN_SPI_FLASH	1
> +#define CONFIG_ENV_SECT_SIZE		0x10000	/* 64KB */
> +#define CONFIG_ENV_SIZE			0x1000	/* 4KB */
> +#define CONFIG_ENV_ADDR			0x70000
> +#define CONFIG_ENV_OFFSET		0x70000	/* env starts here */
> +
> +/*
> + * Default environment variables
> + */
> +#define CONFIG_BOOTARGS "console=ttyS0,115200"
> +
> +#define CONFIG_BOOTCOMMAND				\
> +	"if run usbload || run diskload; then bootm 0x800000; fi"
> +
> +#define CONFIG_EXTRA_ENV_SETTINGS			\
> +	"stdin=serial,nc\0"				\
> +	"stdout=serial,nc\0"				\
> +	"stderr=serial,nc\0"				\
> +	"ipaddr=192.168.1.111\0"			\
> +	"diskload=ide reset && "			\
> +	"ext2load ide 0:1 0x800000 /boot/uImage\0"	\
> +	"usbload=usb start && "				\
> +	"fatload usb 0:1 0x800000 /boot/uImage\0"
> +
> +#endif /* _CONFIG_NETSPACE_V2_H */
> -- 
> 1.6.3.1
> 

> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: Digital signature
Url : http://lists.denx.de/pipermail/u-boot/attachments/20110503/9fab2f64/attachment.pgp 


More information about the U-Boot mailing list