[U-Boot] [PATCH v2 3/8] arm/km: add BootROM config file for memphis SDRAM

Prafulla Wadaskar prafulla at marvell.com
Wed May 4 09:30:33 CEST 2011



> -----Original Message-----
> From: Valentin Longchamp [mailto:valentin.longchamp at keymile.com]
> Sent: Tuesday, May 03, 2011 7:43 PM
> To: u-boot at lists.denx.de
> Cc: Prafulla Wadaskar; holger.brunck at keymile.com; Valentin Longchamp;
> Wolfgang Denk; Detlev Zundel
> Subject: [PATCH v2 3/8] arm/km: add BootROM config file for memphis
> SDRAM
> 
> This RAM is used on mgcoge3un and needs other initialization values
> for the SDRAM controller.
> 
> Signed-off-by: Valentin Longchamp <valentin.longchamp at keymile.com>
> Signed-off-by: Holger Brunck <holger.brunck at keymile.com>
> Acked-by: Heiko Schocher <hs at denx.de>
> cc: Prafulla Wadaskar <prafulla at marvell.com>
> cc: Wolfgang Denk <wd at denx.de>
> cc: Detlev Zundel <dzu at denx.de>
> ---
> Changes for v2:
>    - split up first large patch series to three independent smaller
>      patch series
> 
>  board/keymile/km_arm/kwbimage-memphis.cfg |  197
> +++++++++++++++++++++++++++++
>  1 files changed, 197 insertions(+), 0 deletions(-)
>  create mode 100644 board/keymile/km_arm/kwbimage-memphis.cfg
> 

You are just adding file here, whereas it is not being used. Is it like dead code to me.

Regards..
Prafulla . .


More information about the U-Boot mailing list