[U-Boot] [PATCH v2 2/8] arm/km: remove last_stage_init and unneeded printouts

[Prafulla Wadaskar]

> -----Original Message-----
> From: Valentin Longchamp [mailto:valentin.longchamp at keymile.com]
> Sent: Tuesday, May 03, 2011 7:43 PM
> To: u-boot at lists.denx.de
> Cc: Prafulla Wadaskar; holger.brunck at keymile.com; Valentin Longchamp;
> Wolfgang Denk; Detlev Zundel
> Subject: [PATCH v2 2/8] arm/km: remove last_stage_init and unneeded
> printouts
> 
> From: Holger Brunck <holger.brunck at keymile.com>
> 
> last_stage_init is not available for arm platforms. So move
> the calls to set_km_var and set_bootcount_addr to misc_init_r
> and remove this function.
> 
> Additionally some unneeded printouts were removed.
> 
> Signed-off-by: Valentin Longchamp <valentin.longchamp at keymile.com>
> Signed-off-by: Holger Brunck <holger.brunck at keymile.com>
> Acked-by: Heiko Schocher <hs at denx.de>
> cc: Prafulla Wadaskar <prafulla at marvell.com>
> cc: Wolfgang Denk <wd at denx.de>
> cc: Detlev Zundel <dzu at denx.de>
> ---
> Changes for v2:
>    - split up first large patch series to three independent smaller
>      patch series
> 
>  board/keymile/km_arm/km_arm.c |   20 ++++----------------
>  1 files changed, 4 insertions(+), 16 deletions(-)
> 
> diff --git a/board/keymile/km_arm/km_arm.c
> b/board/keymile/km_arm/km_arm.c
> index f147f1f..4049a4e 100644
> --- a/board/keymile/km_arm/km_arm.c
> +++ b/board/keymile/km_arm/km_arm.c
> @@ -161,11 +161,6 @@ int misc_init_r(void)
>  	char *str;
>  	int mach_type;
> 
> -	puts("Piggy:");
> -	if (ethernet_present() == 0)
> -		puts (" not");
> -	puts(" present\n");
> -
>  	str = getenv("mach_type");
>  	if (str != NULL) {
>  		mach_type = simple_strtoul(str, NULL, 10);
> @@ -174,7 +169,10 @@ int misc_init_r(void)
>  	}
> 
>  	initialize_unit_leds();
> -
> +	set_km_env();
> +#if defined(CONFIG_BOOTCOUNT_LIMIT)
> +	set_bootcount_addr();
> +#endif
>  	return 0;
>  }
> 
> @@ -193,7 +191,6 @@ int board_early_init_f(void)
>  	writel(tmp | FLASH_GPIO_PIN , KW_GPIO0_BASE);
>  	tmp = readl(KW_GPIO0_BASE + 4);
>  	writel(tmp & (~FLASH_GPIO_PIN) , KW_GPIO0_BASE + 4);
> -	printf("KM: setting NAND mode\n");
> 
>  #if defined(CONFIG_SOFT_I2C)
>  	/* init the GPIO for I2C Bitbang driver */
> @@ -223,15 +220,6 @@ int board_init(void)
>  	return 0;
>  }
> 
> -int last_stage_init(void)
> -{
> -	set_km_env();
> -#if defined(CONFIG_BOOTCOUNT_LIMIT)
> -	set_bootcount_addr();
> -#endif
> -	return 0;
> -}

This patch can be merged with 1/8 since you are undoing the changes done there. BTW: what is purpose?

Regards..
Prafulla ..