[U-Boot] [PATCH] nand_spl: nand_boot.c: Init nand_chip.options to 0

[Stefan Roese]

Patch 65a9db7b [nand_spl: Fix large page nand_command()] broke
nand booting on canyonlands. "options" has to be initialized to
0. If not, boards might have the NAND_BUSWIDTH_16 bit set,
resulting in wrong offset calculation.

Signed-off-by: Stefan Roese <sr at denx.de>
Cc: Scott Wood <scottwood at freescale.com>
Cc: Alex Waterman <awaterman at dawning.com>
---
 nand_spl/nand_boot.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c
index cefeb91..62303aa 100644
--- a/nand_spl/nand_boot.c
+++ b/nand_spl/nand_boot.c
@@ -232,6 +232,7 @@ void nand_boot(void)
 	nand_info.priv = &nand_chip;
 	nand_chip.IO_ADDR_R = nand_chip.IO_ADDR_W = (void  __iomem *)CONFIG_SYS_NAND_BASE;
 	nand_chip.dev_ready = NULL;	/* preset to NULL */
+	nand_chip.options = 0;
 	board_nand_init(&nand_chip);
 
 	if (nand_chip.select_chip)
-- 
1.7.5