[U-Boot] [PATCH v3 5/8] arm/km: add second serial interface for kirkwood
Prafulla Wadaskar
prafulla at marvell.com
Thu May 12 13:02:56 CEST 2011
> -----Original Message-----
> From: Valentin Longchamp [mailto:valentin.longchamp at keymile.com]
> Sent: Wednesday, May 04, 2011 9:24 PM
> To: u-boot at lists.denx.de
> Cc: holger.brunck at keymile.com; Prafulla Wadaskar; Valentin Longchamp;
> Wolfgang Denk; Detlev Zundel
> Subject: [PATCH v3 5/8] arm/km: add second serial interface for kirkwood
>
> From: Holger Brunck <holger.brunck at keymile.com>
>
> Signed-off-by: Holger Brunck <holger.brunck at keymile.com>
> Signed-off-by: Valentin Longchamp <valentin.longchamp at keymile.com>
> Acked-by: Heiko Schocher <hs at denx.de>
> cc: Wolfgang Denk <wd at denx.de>
> cc: Detlev Zundel <dzu at denx.de>
> cc: Prafulla Wadaskar <prafulla at marvell.com>
> ---
> Changes for v2:
> - split up first large patch series to three independent smaller
> patch series
>
> include/configs/km_arm.h | 6 ++++++
> 1 files changed, 6 insertions(+), 0 deletions(-)
>
> diff --git a/include/configs/km_arm.h b/include/configs/km_arm.h
> index d27a630..d2669d3 100644
> --- a/include/configs/km_arm.h
> +++ b/include/configs/km_arm.h
> @@ -92,6 +92,7 @@
> #define CONFIG_SYS_NS16550_REG_SIZE (-4)
> #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK
> #define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE
> +#define CONFIG_SYS_NS16550_COM2 KW_UART1_BASE
>
> /*
> * Serial Port configuration
> @@ -136,7 +137,12 @@
>
> #define BOOTFLASH_START 0x0
>
> +/* Kirkwood has two serial IF */
> +#if (CONFIG_CONS_INDEX == 2)
> +#define CONFIG_KM_CONSOLE_TTY "ttyS1"
> +#else
> #define CONFIG_KM_CONSOLE_TTY "ttyS0"
> +#endif
>
> /* size in bytes reserved for initial data */
>
Acked-By: Prafulla Wadaskar <Prafulla at marvell.com>
Regards..
Prafulla . . .
More information about the U-Boot
mailing list