[U-Boot] [PATCH V7 2/3] PMIC: Add dialog pmic support

[Jason Hui]

Hi, Stefano

On Fri, May 13, 2011 at 4:47 PM, Stefano Babic <sbabic at denx.de> wrote:
> On 05/13/2011 10:41 AM, Jason Liu wrote:
>
>>> The patch adds several functions that are strictly related to the
>>> processor and I am checking with the reference manuals to understand
>>> them. I need more time for it.
>>
>> If that, can we consider that I just add the basic mx53loco support:
>> which exclude:
>>
>> Dialog PMIC support, which is just useful to increase the CPU to 1GHZ,
>> by default voltage,
>> CPU can only run up to 800MHZ,
>>
>> clock code(patch 1/3) , which is just useful to increase DDR run up to
>> 400Mhz, by default it's 333Mhz.
>>
>> I just don't want to break the basic mx53loco board support to
>> mainline for so-long time.
>>
>> Please advise, thanks,
>
> If you prefer to proceed in this way, no problem at all, we can do it.
> You can add support for clock/dialog later. In the meantime I will send
> to you my feedback for the clock patch.

OK, I will do it now.

>
> Best regards,
> Stefano Babic
>
> --
> =====================================================================
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
> =====================================================================
>