[U-Boot] [PATCH v8] Add support for Network Space v2 and parents
Wolfgang Denk
wd at denx.de
Sun May 15 14:45:19 CEST 2011
Dear Simon Guinot,
In message <1305462738-2583-1-git-send-email-simon.guinot at sequanux.org> you wrote:
> --===============0038591950==
> Content-Type: text/plain; charset=UTF-8
> Content-Transfer-Encoding: 8bit
>
> This patch add support for the Network Space v2 board and parents, based
> on the Marvell Kirkwood 6281 SoC. This include Network Space (Max) v2
> and Internet Space v2.
>
> Additional information is available at:
> http://lacie-nas.org/doku.php?id=network_space_v2
>
> Signed-off-by: Simon Guinot <sguinot at lacie.com>
> ---
> Changes for v2:
> - add entries to MAINTAINERS file
> - move boards from root Makefile to boards.cfg
> - move MACH_TYPE definition into netspace_v2.h
> - remove CONFIG_SYS_HZ redefinition
> - turn PHY initialization message into debug()
>
> Changes for v3: none
>
> Changes for v4:
> - enhance commit message: add SoC information
>
> Changes for v5: none
>
> Changes for v6:
> - enable device tree support
> - clean some "#define" in netspace_v2.h
> - enhance commit message: provide description URL and mention SoC
> family
> - rebase against u-boot-{arm,marvell}/master branches
>
> Changes for v7:
> - rebase against u-boot-marvell/master branch
>
> Changes for v8:
> - update commit title (add netspace_v2 parents information).
> - move GPIO button definition into header file.
> - update CONFIG_IDENT_STRING with boards alias.
> - handle wrong board definition.
> - by default, use DHCP to get IP address.
>
> MAINTAINERS | 6 +
> board/LaCie/netspace_v2/Makefile | 49 ++++++++++
> board/LaCie/netspace_v2/kwbimage.cfg | 162 +++++++++++++++++++++++++++++++++
> board/LaCie/netspace_v2/netspace_v2.c | 142 +++++++++++++++++++++++++++++
> board/LaCie/netspace_v2/netspace_v2.h | 42 +++++++++
> boards.cfg | 3 +
> include/configs/netspace_v2.h | 162 +++++++++++++++++++++++++++++++++
> 7 files changed, 566 insertions(+), 0 deletions(-)
> create mode 100644 board/LaCie/netspace_v2/Makefile
> create mode 100644 board/LaCie/netspace_v2/kwbimage.cfg
> create mode 100644 board/LaCie/netspace_v2/netspace_v2.c
> create mode 100644 board/LaCie/netspace_v2/netspace_v2.h
> create mode 100644 include/configs/netspace_v2.h
What the hell is this? Is this supposed to be a reposting of your
earlier patches? Or what?? But hey, why is each and every patch
version different, then?
So we have three patches now, which - according to your changelogs -
are supposed to be identical:
8522 05/14 Simon Guinot [U-Boot] [PATCH] Add support for Network Space v2 and parents
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/99745
8523 05/14 Simon Guinot [U-Boot] [PATCH v8] Add support for Network Space v2 and parents
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/99746
8554 05/15 Simon Guinot [U-Boot] [PATCH v8] Add support for Network Space v2 and parents
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/99771
diff 8522 8523:
111c115
< - update commit title (add 'parents' information).
---
> - update commit title (add netspace_v2 parents information).
115,116c119,120
< - by default, use DHCP to get an IP address.
<
---
> - by default, use DHCP to get IP address.
>
diff 8523 8554:
575,577c576
< @@ -104,6 +104,9 @@ davinci_schmoogie arm arm926ejs schmoogie davinci
< davinci_sffsdr arm arm926ejs sffsdr davinci davinci
< davinci_sonata arm arm926ejs sonata davinci davinci
---
> @@ -106,6 +106,9 @@ davinci_sonata arm arm926ejs sonata davinci
578a578,579
> suen8 arm arm926ejs km_arm keymile kirkwood
> mgcoge2un arm arm926ejs km_arm keymile kirkwood
Why is each of your (uncommented) respostings different to the
previous one???
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Ever try. Ever fail. No matter. Try again. Fail again. Fail better.
-- S. Beckett
More information about the U-Boot
mailing list